Crate GoodWrench 350 Questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SnowNeck · 05-28-2014, 08:13 PM

Hey guys, I found a few old threads on this motor but I wanted to make a new one. I'm seriously looking into getting the 350 Good wrench crate motor and had a few questions. First the application I'd be putting it in. A lifted (just a 4 inch lift) 1985 GMC high sierra 4x4, currently 305/700r4/208np 3.08s gears and running 33/12.5/15 inch tires. my 305 has finally seen its day with 300k on it. Parts that I'd be swapping- Edlebrock 650cfm, headers, high rise intake manifold, High output MSD distributor, 9mm wires.

1. Has anyone ran the Good wrench as a daily driver?
2. Do you like the motor?
3. Problems?
4. where do you suggest to Purchase it?
5.mpg (around of course)
6. For a shop to install, what did it cost you guys?
Thanks, Jake

05-28-2014, 08:13 PM	#1
SnowNeck Registered User Join Date: May 2012 Location: Pennsylvania Posts: 132	Crate GoodWrench 350 Questions Hey guys, I found a few old threads on this motor but I wanted to make a new one. I'm seriously looking into getting the 350 Good wrench crate motor and had a few questions. First the application I'd be putting it in. A lifted (just a 4 inch lift) 1985 GMC high sierra 4x4, currently 305/700r4/208np 3.08s gears and running 33/12.5/15 inch tires. my 305 has finally seen its day with 300k on it. Parts that I'd be swapping- Edlebrock 650cfm, headers, high rise intake manifold, High output MSD distributor, 9mm wires. 1. Has anyone ran the Good wrench as a daily driver? 2. Do you like the motor? 3. Problems? 4. where do you suggest to Purchase it? 5.mpg (around of course) 6. For a shop to install, what did it cost you guys? Thanks, Jake __________________ 1985 High Sierra step side 4x4 Last edited by SnowNeck; 05-28-2014 at 08:22 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.