68 1/2t lwb for sale - WA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dan72cst · 11-13-2004, 04:48 PM

NOT MINE : My co-worker is selling his father son project (son lost interest). He has owned the truck for over 20 years and has invested a lot of money into this project. It is currently some what taken apart. It was an original small block 4 speed truck, but has all the original parts to make it a 400 small block, 400 auto.

Newly professionally rebuilt small block 400. the motor was built by a local machinist for his own family. The motor has been broken in (900 miles) It has a low mid range cam and comes with the engine stand that it is on.

Turbo 400 transmission removed from a 72 3/4t with 75,000 original miles on it. It has been serviced and cleaned ready for installation.

The front suspension has been converted to a 72 power disk brakes by a local shop. All the tierod ends, bushings, idler arm, brakes, coil springs and shocks are all NEW.

The rear suspension has the original 4:11 rear end, with NEW coil springs and NEW shocks.

The core support has been completely restored and painted, front fenders have been prepared for paint. The front chrome bumper shown in the picture is the original bumper. The hood is rust free, staright and original faded paint. The front inner fenders have been restored with a thick textured product.

The truck still has the original steering column, but comes with the correct automatic column.

The truck in general is very straight and comes with a lot of nice parts, some NOS parts, some very nice clean original used parts. The rockers have typical rust and would need to be replaced before paint. Don't quote me, but I think only one cab support needs to be replaced. The tires almost new as well. I'm sure I forgot some things.

He is NOT interested in parting this out. He wants to sell it complete and wants it gone. He has invested thousands of dollars into this truck and realizes in the current state it is not worth that, but is asking only $1000. He paid a lot more than that just for the motor!

The truck is located in Arlington, WA. If you are interested in the truck and want to call him, please call him directly on his cell 425-359-3639 NO CALLS AFTER 8:00PM PACIFIC TIME PLEASE!!!!!!!!!

If you post here or contact me (Dan72cst) then I will try and get the questions answered, but there will be a time delay, because I will have to ask him.

Dan72cst · 11-14-2004, 09:59 PM

Comes with (4) NOS center caps for 5 lug ralleys in boxes. He also has (4) very nice beauty rings.

Dan72cst · 11-15-2004, 07:25 PM

Ttt

Dan72cst · 11-17-2004, 03:00 PM

Bumping this to the top again as they move so fast through here

CG · 11-17-2004, 04:05 PM

Quote:

Originally Posted by Dan72cst

Bumping this to the top again as they move so fast through here

hey dan can you give a little more info on the 68 3/4 ton you have for sale thats in pieces?

CG · 11-17-2004, 11:06 PM

ttt so dan sees this

Dan72cst · 11-19-2004, 10:04 AM

CG, sent you a PM

Gotta71C20 · 11-19-2004, 02:02 PM

Wow!!!! That's a good buy. Someone jump on this quick, and save me from myself! Larry

Dan72cst · 11-22-2004, 03:14 PM

Gotta71C20,
You better come look at this!

Dan72cst · 11-24-2004, 01:14 PM

T.t.t.

Dan72cst · 11-27-2004, 02:09 PM

Any suggestions on how to sell this thing other than e-bay??? Is anyone half way interested??

CG · 11-27-2004, 07:55 PM

Quote:

Originally Posted by Dan72cst

Any suggestions on how to sell this thing other than e-bay??? Is anyone half way interested??

dan i was just talking to my brother about that truck and he is kinda sorta interested maybe we could go take a look at it tomorrow when im done scoping out yours?

**breeh** · 11-27-2004, 11:07 PM

Dan72CST, I just spoke to your coworker. I would have come and taken it off of his hands tomorrow (Sunday) but it sounds like he has a commitment already.

11-13-2004, 04:48 PM	#1
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	68 1/2t lwb for sale - WA NOT MINE : My co-worker is selling his father son project (son lost interest). He has owned the truck for over 20 years and has invested a lot of money into this project. It is currently some what taken apart. It was an original small block 4 speed truck, but has all the original parts to make it a 400 small block, 400 auto. Newly professionally rebuilt small block 400. the motor was built by a local machinist for his own family. The motor has been broken in (900 miles) It has a low mid range cam and comes with the engine stand that it is on. Turbo 400 transmission removed from a 72 3/4t with 75,000 original miles on it. It has been serviced and cleaned ready for installation. The front suspension has been converted to a 72 power disk brakes by a local shop. All the tierod ends, bushings, idler arm, brakes, coil springs and shocks are all NEW. The rear suspension has the original 4:11 rear end, with NEW coil springs and NEW shocks. The core support has been completely restored and painted, front fenders have been prepared for paint. The front chrome bumper shown in the picture is the original bumper. The hood is rust free, staright and original faded paint. The front inner fenders have been restored with a thick textured product. The truck still has the original steering column, but comes with the correct automatic column. The truck in general is very straight and comes with a lot of nice parts, some NOS parts, some very nice clean original used parts. The rockers have typical rust and would need to be replaced before paint. Don't quote me, but I think only one cab support needs to be replaced. The tires almost new as well. I'm sure I forgot some things. He is NOT interested in parting this out. He wants to sell it complete and wants it gone. He has invested thousands of dollars into this truck and realizes in the current state it is not worth that, but is asking only $1000. He paid a lot more than that just for the motor! The truck is located in Arlington, WA. If you are interested in the truck and want to call him, please call him directly on his cell 425-359-3639 NO CALLS AFTER 8:00PM PACIFIC TIME PLEASE!!!!!!!!! If you post here or contact me (Dan72cst) then I will try and get the questions answered, but there will be a time delay, because I will have to ask him. Attached Images __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400 Last edited by Dan72cst; 11-13-2004 at 06:05 PM. Reason: Added tire info

11-14-2004, 09:59 PM	#2
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	Comes with (4) NOS center caps for 5 lug ralleys in boxes. He also has (4) very nice beauty rings. __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

11-15-2004, 07:25 PM	#3
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	Ttt __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

11-17-2004, 03:00 PM	#4
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	Bumping this to the top again as they move so fast through here __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

11-19-2004, 10:04 AM	#7
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	CG, sent you a PM __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

11-17-2004, 11:06 PM	#6
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,843	ttt so dan sees this

11-19-2004, 02:02 PM	#8
Gotta71C20 Registered User Join Date: Dec 2000 Location: Belfair, Wa. USA Posts: 80	Wow!!!! That's a good buy. Someone jump on this quick, and save me from myself! Larry

11-22-2004, 03:14 PM	#9
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	Gotta71C20, You better come look at this! __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

11-24-2004, 01:14 PM	#10
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	T.t.t. __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

11-27-2004, 02:09 PM	#11
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	Any suggestions on how to sell this thing other than e-bay??? Is anyone half way interested?? __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

11-27-2004, 11:07 PM	#13
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Dan72CST, I just spoke to your coworker. I would have come and taken it off of his hands tomorrow (Sunday) but it sounds like he has a commitment already. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.