|
09-17-2003, 08:36 AM
|
#1 |
|
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Radio Antenna on a 67
I am looking to remove the ugly fender mounted radio antenna on my '67. What is everyone using in place of an external antenna on their 67-72 trucks?
Thanks! Joe |
|
|
|
09-17-2003, 10:19 AM
|
#2 |
|
Low & Slow
Join Date: Dec 2002
Location: Oklahoma
Posts: 1,047
|
I am planning on running an antenna under the cowl and smoothing out the hole where the original antenna goes. I also don't listen to the radio much so reception isn't really an issue for me.
__________________
70' C-10 LWB Fleetside 4.5/6 drop 
|
|
|
|
|
09-17-2003, 10:54 AM
|
#3 |
|
Registered User
Join Date: Feb 2001
Location: Salem , Oregon 97301
Posts: 1,796
|
Factory plain jane trucks that were produced with out radios . The cowls had no antena hole .
|
|
|
|
|
09-17-2003, 11:12 AM
|
#4 |
|
CCRider
Join Date: Feb 2000
Location: Olive Branch,MS,USA
Posts: 2,232
|
If you live in a big city with good reception, you can do a lot of things. I built a "kit car" a couple years ago and bought an el cheapo rubber ducky antenna and tie wrapped it to the wiring under the dash...worked great. If you live out in the country and actually want to hear the radio, the cowl mounted antenna is your best bet.
__________________
72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS |
|
|
|
|
09-17-2003, 11:58 AM
|
#5 |
|
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Thanks - For now, I think I'll ziptie the antenna inside the cowl or fender.
I think I have a cowl panel w/o the hole in the garage too 
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
