Thanks to the forum, I got my truck back together - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TIMSPEED · 02-13-2004, 05:31 AM

I replaced my intake manifold gasket today (to try and track down a mysterious vacuum leak). I also put the stock #62 primary jets back in the carb. Well, once I got it back together and running, and the floats set...I'd rev it, and it wouldn't wanna rev, it'd just kinda like cough and pop and sputter. So, I think I'm gonna put the #64's back in and see what happens.

Definately idle's better though, I actually got the idle turned WAAY down and it sounded like it had a MEAN cam.

Blue Beard · 02-13-2004, 09:03 AM

Congrats on getting that far.........sounds like your learning alot from the board.....

87Silvy · 02-13-2004, 07:41 PM

What kinda cam u got in it, and what are the specs on it?

low 84 · 02-13-2004, 09:47 PM

you should put some heads and a mean cam in there, i don't need to turn mine down

TIMSPEED · 02-13-2004, 09:55 PM

Quote:

Originally posted by low 84
you should put some heads and a mean cam in there, i don't need to turn mine down

You forgot, I have two other cars to make look good too..to this point, I've been putting 99% of my money into my vette, to get it to run 12.99's, and it's finally going 13.0's, so I'm done now. Once I get a back to workin, I'm gonna swap a Vortec/292H/RPM "AirGap"-750 and on top of that, I might bang a switch

Cuz my goal is to get the truck (on the motor) to go 12.99's. That way both my cars will be nice

02-13-2004, 05:31 AM	#1
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Thanks to the forum, I got my truck back together I replaced my intake manifold gasket today (to try and track down a mysterious vacuum leak). I also put the stock #62 primary jets back in the carb. Well, once I got it back together and running, and the floats set...I'd rev it, and it wouldn't wanna rev, it'd just kinda like cough and pop and sputter. So, I think I'm gonna put the #64's back in and see what happens. Definately idle's better though, I actually got the idle turned WAAY down and it sounded like it had a MEAN cam. __________________ I have a few cars... See Them Here

02-13-2004, 09:03 AM	#2
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Congrats on getting that far.........sounds like your learning alot from the board..... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

02-13-2004, 07:41 PM	#3
87Silvy Registered User Join Date: Sep 2003 Location: North Texas Posts: 326	What kinda cam u got in it, and what are the specs on it? __________________ 1987 Chevrolet Silverado 2005 Chevrolet Silverado

02-13-2004, 09:47 PM	#4
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	you should put some heads and a mean cam in there, i don't need to turn mine down __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.