how hard is it to?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dropdprpls10 · 02-14-2005, 03:45 PM

how hard is it to replace the studs that hold the upper control arm on on a 2wd pickup?? they look to be pressed in ...is it something i can do at home or do i need someone to do it for me.. i only saw them at LMC but it a vendor of this message board has them i would like to buy frim them instead of LMC..

junkyardjohn · 02-14-2005, 04:56 PM

JUST SMACK EM WITH A BIG BRASS HAMMER. THEY COME OUT JUST LIKE WHEEL STUDS.

JOHN

67chevemall · 02-14-2005, 05:44 PM

you mean you got the nuts off? I've never seen a nut come off there in one piece!

dropdprpls10 · 02-14-2005, 10:21 PM

Quote:

Originally Posted by 67chevemall

you mean you got the nuts off? I've never seen a nut come off there in one piece!

thats why im asking lol.. i was just going to cut them off and hope i can get a new set back in!
if not we fab !!!

junkyardjohn · 02-14-2005, 10:30 PM

Yah .. Thats One Nice Thing About Living Out Here In The Dry West. Nuts & Bolts Still Unscrew After 30 Or 40 Years. I Lived In Michigan For 35 Years, & After A Couple Of Winters Everything From The Windows On Down Was A One Piece Rusty Blob. I'll Never Try To Restore One Of Those Again No Matter Where I Live.

John

(IF YOU CAN'T FIND A STUD, JUST USE A FINE THREAD BOLT & TACK IT IN PLACE WITH A WELDER)

dropdprpls10 · 02-24-2005, 04:01 AM

they came out!!!!!!! woohoo.. i brought a pipe vise home from work with a long chain and i straped the front crossmember to it and beat the heck out of it with a nice big hammer.. now the fun starts putting the new ones in after i sand blast it lol!!!!

72MARIO · 02-24-2005, 05:28 AM

HEY JOHN.

Look under tthe pitcures board there is pics of pics of project 67.
That is a original 72 cab and frame. Restored from the ground up. I agree i would probiblyu never do another Ontario truck again

WILLNIK · 02-24-2005, 08:37 AM

I used a "spacer" and a old nut and pressed them back in. Just my .02
Terry

02-14-2005, 03:45 PM	#1
dropdprpls10 Registered User Join Date: Jun 2004 Location: Reading PA Posts: 164	how hard is it to?? how hard is it to replace the studs that hold the upper control arm on on a 2wd pickup?? they look to be pressed in ...is it something i can do at home or do i need someone to do it for me.. i only saw them at LMC but it a vendor of this message board has them i would like to buy frim them instead of LMC.. __________________ 98% of ALL fords are still on the road today... .... the other 2% made it home!!! where is the best place to park a ford???.. next to a fire station!!!! pictures of my new and old trucks!

02-14-2005, 04:56 PM	#2
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	JUST SMACK EM WITH A BIG BRASS HAMMER. THEY COME OUT JUST LIKE WHEEL STUDS. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

02-14-2005, 05:44 PM	#3
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	you mean you got the nuts off? I've never seen a nut come off there in one piece! __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

02-14-2005, 10:30 PM	#5
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	Yah .. Thats One Nice Thing About Living Out Here In The Dry West. Nuts & Bolts Still Unscrew After 30 Or 40 Years. I Lived In Michigan For 35 Years, & After A Couple Of Winters Everything From The Windows On Down Was A One Piece Rusty Blob. I'll Never Try To Restore One Of Those Again No Matter Where I Live. John (IF YOU CAN'T FIND A STUD, JUST USE A FINE THREAD BOLT & TACK IT IN PLACE WITH A WELDER) __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST Last edited by junkyardjohn; 02-14-2005 at 10:34 PM.

02-24-2005, 04:01 AM	#6
dropdprpls10 Registered User Join Date: Jun 2004 Location: Reading PA Posts: 164	they came out!!!!!!! woohoo.. i brought a pipe vise home from work with a long chain and i straped the front crossmember to it and beat the heck out of it with a nice big hammer.. now the fun starts putting the new ones in after i sand blast it lol!!!! __________________ 98% of ALL fords are still on the road today... .... the other 2% made it home!!! where is the best place to park a ford???.. next to a fire station!!!! pictures of my new and old trucks!

02-24-2005, 05:28 AM	#7
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	HEY JOHN. Look under tthe pitcures board there is pics of pics of project 67. That is a original 72 cab and frame. Restored from the ground up. I agree i would probiblyu never do another Ontario truck again __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

02-24-2005, 08:37 AM	#8
WILLNIK Senior Member Join Date: Jul 2000 Location: Newark, NY Posts: 626	I used a "spacer" and a old nut and pressed them back in. Just my .02 Terry __________________ 50 miles west of Syracuse, NY '94 Silverado swb '70 Chevelle '65 Corvette roadster '11 Tahoe (wifes ride)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.