AZ 1972 k10 A/C dash UNCUT

[Michael D]

Just as the title states, Im looking for an uncut factory A/C dash. I really only need the dash, not the gauges or glove box but am open if need be.
Just for reference Im in Lake Havasu City Arizona, close to Vegas, LA and even San Diego.
Thanks

[Ironhorse]

Have a nice one, uncut with factory A/C in original medium olive from a '70 but am laid up at the moment from surgery. Bored out of my mind, haven't been out of the house in nearly two weeks except for seeing the Doc after the surgery for a post-op. Not sure how soon I could help plus being in Kansas, shipping is just not cheap at all anymore.

[Michael D]

PM sent

[Richard]

Originally Posted by Michael D

Just as the title states, Im looking for an uncut factory A/C dash. I really only need the dash, not the gauges or glove box but am open if need be.
Just for reference Im in Lake Havasu City Arizona, close to Vegas, LA and even San Diego.
Thanks

I have one complete I removed many years ago. Did not use for my rebuild, just cut out my existing dash for the A/C. Dash was unbolted and welds at window frame drilled out with spot weld cutter. It is painted purple and may have some added screw holes. Have not looked at it in years. Would sell for a bit more than the repop goes for. Pm me if interested. Shipping is not feasible, I am in the 93063 area code.

[Michael D]

Thanks Richard, I think I’ve got one available already from another member.
By the way, I hope I’m not out of line or have missed anything but how did your truck build turn out, after your message I spent the last hour or so reading it, pretty amazing.

[Richard]

Originally Posted by Michael D

Thanks Richard, I think I’ve got one available already from another member.
By the way, I hope I’m not out of line or have missed anything but how did your truck build turn out, after your message I spent the last hour or so reading it, pretty amazing.

Great that you found what you needed. Free to contact me if it does not work out.
Thank you for the kudos on my truck.
Work on the truck stalled for a few reasons. Suppliers not sending parts I ordered, and mainly my part time job helping a friend turned into pretty much full time. At my age I do not have the energy, willpower or whatever to put in the extra hours after working. In my 20's it was no problem. Still try to do a bit here and there. But it has not progressed much since the last post. I finally got some driveshafts and should post an update with the little things done.