![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Dec 2011
Location: ontario calif
Posts: 5
|
how to install 350 chevy in 62 pickup
I am building a 62 sedan delivery. It came with inline 6 cyl I am installing late 80's TPI 350. How do you go from the frame to the engine mount? Is there a conversion kit for the install???
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2011
Location: mayberry nc
Posts: 11
|
Re: how to install 350 chevy in 62 pickup
i went to o'reilly's and bought motor mounts for a v/8 62 chevy pickup.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2011
Location: mayberry nc
Posts: 11
|
Re: how to install 350 chevy in 62 pickup
bolt in, takes a ram horn exhaust manifold. easier if you remove the perches from the frame and bolt them to the motor bofore installing.
|
![]() |
![]() |
![]() |
#4 |
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: how to install 350 chevy in 62 pickup
Welcome to the forum!
Here's a link to how I did a 350 sbc swap in my 1960 GMC. The Chevy and GMC frames are the same 60-62, but the original engine mount towers are different between the makes: http://67-72chevytrucks.com/vboard/s...d.php?t=369663 |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Dec 2011
Location: ontario calif
Posts: 5
|
Re: how to install 350 chevy in 62 pickup
|
![]() |
![]() |
![]() |
#6 | |
Registered User
Join Date: Dec 2011
Location: ontario calif
Posts: 5
|
Re: how to install 350 chevy in 62 pickup
Quote:
|
|
![]() |
![]() |
![]() |
#7 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: how to install 350 chevy in 62 pickup
The '67-'72 small block motor mount brackets will work quite well on the '60-'62's.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Dec 2011
Location: ontario calif
Posts: 5
|
Re: how to install 350 chevy in 62 pickup
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2011
Location: MV Ma.
Posts: 114
|
Re: how to install 350 chevy in 62 pickup
I know this is an old thread, but here goes....I have a 1962 c-10 w/ a sbc i'm trying to mount in. I made 1.250" spacers to go between the motor mount & the top of the frame rail to get the balancer off the center link,that's fine. My problem now is the lower part of the mounts no longer line up with the mounting holes in the crossmember...the motor mount holes are too far 'outboard' ,or towards the wheels. Do I have later (72' up) motor mounts? I need 67-72 correct? The ones in my truck look like 67-72....Thanks!
Edit: I am told this is a 400 ci sbc...though I haven't gone by the numbers on it yet ...my mounts look like the ones in the above pic. Last edited by Blue Blood; 06-10-2012 at 06:18 PM. Reason: info |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Apr 2008
Location: Md
Posts: 2,475
|
Re: how to install 350 chevy in 62 pickup
I put a 283 sbc in my 62 with 1/2" spacer on top..(this is on top of 83 crossmember w/disc brakes) ...1.250 seems kind of tall.
Last edited by notsolo; 06-10-2012 at 09:42 PM. Reason: add to |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Apr 2011
Location: MV Ma.
Posts: 114
|
Re: how to install 350 chevy in 62 pickup
The usual height guys go with seems to be 1.0" for the spacer, but that was BARELY getting the balancer off the center link, so I went an extra .250"...Which looks good now, & since it's only a vertical adjustment, I can't figure why the hole alignment is off.
Previous owner had the motor mounts directly bolted to the frame & cut a large radial groove into the center link...I also noticed he had the passenger motor mount loose!?! which might mean he has alignment issues as well. Thanks for the reply! |
![]() |
![]() |
![]() |
#12 | |
But Found Her 25yrs Later!
![]() Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,525
|
Re: how to install 350 chevy in 62 pickup
Quote:
I also used 1/2" spacers. I plan on putting washers under the nuts, I just have them lightly tightened for now. ![]() Posted via Mobile Device
__________________
I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 |
|
![]() |
![]() |
![]() |
Bookmarks |
Tags |
350 engine, 62 chevy sedan, engine swap |
|
|