Folding Seats - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**'68OrangeSunshine** · 09-14-2003, 06:42 AM

Any one tried using folding seat option package from later model Sub in middle seat position? PO included '73/'87 type 60/40 folding seats when I bought the burb, but a fit test showed they wouldn't sit flat. Biggest issue was no place to mount sidewall/seatback locking latches. Besides latch hardware being lost.
It would be neat, though, since the passenger side one-place seat next to door #3 could be up while the 60% rightside bench could be down under a load.

grebus1 · 09-15-2003, 12:10 PM

I had inquired about this same issue a while back on the regular '67-72 board. You might try searching there or try a new post. There were at least a couple people who responded to me and one even sent me some pics of the folding seat in his burb. I think I have hard copies but I don't think I have the jpegs anymore.

**'68OrangeSunshine** · 09-16-2003, 06:01 AM

My buddy has suggested we cut out the middle seat floor pan area and drop it a couple inches to make room for the seats. This had complications since it's a 4wd and has a high hump and beefy driveshaft. Solution would be a body lift.
He also wants to graft in a sliding cargo door on the drivers side [preferably stolen from some soccer mom's minvan] JK/LOL. All my friends are crazy - or they wouldn't hang out with me.

grebus1 · 09-16-2003, 03:20 PM

Here are some pics I found on the parts board...

grebus1 · 09-16-2003, 03:20 PM

another...

**'68OrangeSunshine** · 09-17-2003, 05:25 AM

Sweet.

09-14-2003, 06:42 AM	#1
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,440	Folding Seats Any one tried using folding seat option package from later model Sub in middle seat position? PO included '73/'87 type 60/40 folding seats when I bought the burb, but a fit test showed they wouldn't sit flat. Biggest issue was no place to mount sidewall/seatback locking latches. Besides latch hardware being lost. It would be neat, though, since the passenger side one-place seat next to door #3 could be up while the 60% rightside bench could be down under a load.

09-15-2003, 12:10 PM	#2
grebus1 Registered User Join Date: Feb 2000 Location: Edmonds, WA Posts: 322	I had inquired about this same issue a while back on the regular '67-72 board. You might try searching there or try a new post. There were at least a couple people who responded to me and one even sent me some pics of the folding seat in his burb. I think I have hard copies but I don't think I have the jpegs anymore. __________________ '72 Chevy Suburban Custom Deluxe 10, 402/TH400

09-16-2003, 03:20 PM	#4
grebus1 Registered User Join Date: Feb 2000 Location: Edmonds, WA Posts: 322	Here are some pics I found on the parts board... __________________ '72 Chevy Suburban Custom Deluxe 10, 402/TH400

09-16-2003, 03:20 PM	#5
grebus1 Registered User Join Date: Feb 2000 Location: Edmonds, WA Posts: 322	another... __________________ '72 Chevy Suburban Custom Deluxe 10, 402/TH400

09-17-2003, 05:25 AM	#6
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,440	Sweet. Last edited by '68OrangeSunshine; 09-17-2003 at 05:27 AM.

09-16-2003, 06:01 AM	#3
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,440	Floor Pan Surgery My buddy has suggested we cut out the middle seat floor pan area and drop it a couple inches to make room for the seats. This had complications since it's a 4wd and has a high hump and beefy driveshaft. Solution would be a body lift. He also wants to graft in a sliding cargo door on the drivers side [preferably stolen from some soccer mom's minvan] JK/LOL. All my friends are crazy - or they wouldn't hang out with me.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.