PTFE AN6 Fuel hose bundle deal

[HotRodfuelhose]

Hi Folks;

This forum has been a big help while building my 1980 C10, this build is what caused this business to be created as I was trying to find fuel line to install my FiTech fuel injection and found it to be a big PITA. I thought I can do better so I got in touch with a ton of manufacturers and got samples. Did a ton of testing and found the best one to go to market. You can check out my Build Thread here.

As a thank you to this Forum as one of the groups who helped me so much through my project I have created a promo code just for you guys. CHEVYTRUCK10

We have on promo right now 20FT of PTFE stainless or Nylon braided line. As well as 8 fittings of your choice - Choose from - Straight, 45, 90, and 180 degree fittings.
Default fitting choice is 2 of each fitting. 2 - straight, 2 45, 2 90, and 2 180 degree AN6 fittings
Perfect for Fitech or Sniper installs. LS swaps, Carbed applications.

Very good chemical resistance compared to rubber lined hose.

114.97 for the AN6

AN8 also available $139.97

Free Shipping on ALL ORDERS

www.hotrodfuelhose.com


Thanks
Justin

[knomadd]

Are you going to get black fittings?

[HotRodfuelhose]

Originally Posted by knomadd

Are you going to get black fittings?

Yes, they are in production and we should see them Mid - Late October in AN6 size. As well we will be getting Blue and Red braided hose in AN6 size.

[HotRodfuelhose]

Originally Posted by knomadd

Are you going to get black fittings?

Black fittings in AN6 are now in stock.

Black hose will be restocked next week.

Black fittings with stainless hose is currently available.

[HotRodfuelhose]

Originally Posted by knomadd

Are you going to get black fittings?

Hi my friend. The black bundles are now available.

https://hotrodfuelhose.com/collectio...-fittings-save

[SIXTY9]

Justin,

Do you have kits for the Holley Sniper EFI with return to tank? I am using a 69 Camaro gas tank also by Holley with fuel pump and sender. I am installing the system in a
69 C/10 SWB. If so please Quote.

Thanks,
Wally

[HotRodfuelhose]

Originally Posted by SIXTY9

Justin,

Do you have kits for the Holley Sniper EFI with return to tank? I am using a 69 Camaro gas tank also by Holley with fuel pump and sender. I am installing the system in a
69 C/10 SWB. If so please Quote.

Thanks,
Wally

Hey Wally the AN6 bundle for 109.99 should work well for that setup. I run the same on my 1980 with 383 and fitech. The only extra piece you may need is hardline to an6 off the sending unit. I have attached a picture of what that looks like on mine.

[SIXTY9]

Justin,

Do you have that hardline too?

[HotRodfuelhose]

Originally Posted by SIXTY9

Justin,

Do you have that hardline too?

I do not. got mine from summit. The 3/8 size is summit brand and 5/16 was Earls.

[SIXTY9]

Justine,

Thanks I will get it ordered this weekend.

Thanks for your time.
Wally

[HotRodfuelhose]

Originally Posted by SIXTY9

Justine,

Thanks I will get it ordered this weekend.

Thanks for your time.
Wally

Thanks for the support, any other questions let me know.

[SIXTY9]

Justin,

Would you happen to know the part numbers by chance?

[HotRodfuelhose]

Originally Posted by SIXTY9

Justin,

Would you happen to know the part numbers by chance?

Part#: EAR-165056ERL
Item: ALUM TUBE ADPT -6 MALE AN TO 5



Part#: SUM-2200077
Item: -6-3/8 MALE HARDTUBE FITTING

Obviously make sure your sending unit is 3/8 feed 5/16 return for these ones.

[SIXTY9]

Thanks, I will be ordering the EFI system this weekend also. Appreciate you help.

[SIXTY9]

Kit on order Thanks.

[HotRodfuelhose]

Originally Posted by SIXTY9

Kit on order Thanks.

Thanks for your support, I shipped it out today and it was a struggle due to an epic snow storm coming down right now.

If anyone else is looking for the Black nylon braided PTFE hose in the AN6 size I currently only have 2 bundles left.

Justin

[SIXTY9]

Thanks hope it wasn't too bad. It will be awhile before I get installed. I will be breaking in engine with carburetor, after that I will send you some pictutes.

Wally

[HotRodfuelhose]

Originally Posted by SIXTY9

Thanks hope it wasn't too bad. It will be awhile before I get installed. I will be breaking in engine with carburetor, after that I will send you some pictutes.

Wally

Look forward too it.

[HotRodfuelhose]

AN6 straight fittings are currently SOLD OUT. We will be getting more but without the straight fittings the bundle is unavailable as well.

If you would like a Bundle with 45/90/180 degree fittings we can still make that work but you must message directly as the website will not process the order.

AN8 is still available

Thanks.

[hotrodsinner]

When will more straights be available?

[HotRodfuelhose]

Shortly. I actually have 2 left as another customer chose to go with 45s instead. I can make one bundle work.

Let me know.

[hotrodsinner]

Pm sent

[HotRodfuelhose]

Originally Posted by hotrodsinner

Pm sent

Got it and replied, have a great weekend.