MD Blazer visor hardware - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 02-15-2018, 09:01 PM

Nov. 1st 2019 just got in 20 more sets still same price

I have purchased enough hardware to make up 10 complete sets. If it goes well I will get more if the demand is there. They are not 100% correct but are the closest to original I have seen so far. You have to buy a minimum and not everyone is going to want to do that.

The sets consist of

(4) of the 5/16-18 x 1" stainless oval head screws the originals were 7/8" long but these work fine without bottoming out. The head diameter on them is also a touch smaller but have been tested and work fine

(2) stainless 5/16-18 x 2.5" hex head screws with stainless lock washers

1st class shipping in padded envelope up to 3 sets small flat rate for 4 or more

1 set including shipping and PP fees $17.50

2 sets including shipping & PP fees $30.50

3 sets including shipping & PP fees $39.50

The next to last picture shows original screw on the right and new screw on the left.

The last picture shows recommendation from the supplier

My PP is in my signature. Make sure your address is included and what you are purchasing please.

Edit 2.16.18 1st batch sold out. Have enough for 30 more sets will be here early next week

30 sets showed up today 2-22-18 5 sets already sold have 25 sets left

.

jondancer · 02-15-2018, 10:05 PM

Nice , I'll be ordering soon

**tmontg01** · 02-16-2018, 01:05 AM

I'll take 2 sets, thanks Richard!

Harold Holbrook · 02-16-2018, 06:41 AM

I'll take 1 sets, thanks Richard!

rsavage · 02-16-2018, 07:24 AM

I'll take a set Richard.

Paypal payment sent.

**richard2717** · 02-16-2018, 07:52 AM

Quote:

Originally Posted by tmontg01

I'll take 2 sets, thanks Richard!

Quote:

Originally Posted by rsavage

I'll take a set Richard.

Paypal payment sent.

Got your payments, they will both ship today.

Thanks
Richard

**richard2717** · 02-16-2018, 07:53 AM

Quote:

Originally Posted by Harold Holbrook

I'll take 1 sets, thanks Richard!

I will pull a set to side pending payment

Thanks
Richard

**mortoyz** · 02-16-2018, 08:08 AM

PP sent. Thanks

**richard2717** · 02-16-2018, 08:14 AM

Quote:

Originally Posted by mortoyz

PP sent. Thanks

Got your payment they will ship this morning

thanks
Richard

**richard2717** · 02-16-2018, 08:15 AM

5 sets left in 1st batch

GSD Guy · 02-16-2018, 09:34 AM

I will take one set please, PP sent.

Thanks,
Kyle

**richard2717** · 02-16-2018, 09:40 AM

Quote:

Originally Posted by GSD Guy

I will take one set please, PP sent.

Thanks,
Kyle

They will ship this morning
Thanks

Rawhedrex · 02-16-2018, 10:31 AM

I will take 1 set. PayPal Sent! Thanks!

**richard2717** · 02-16-2018, 10:49 AM

Quote:

Originally Posted by Rawhedrex

I will take 1 set. PayPal Sent! Thanks!

They will ship this morning
Thanks

**a1vintage69** · 02-16-2018, 11:20 AM

Richard, I will take just one set for now, I ALSO still need one extra screw. Can you throw one in for a couple bucks extra?.Please let me know before I pay you. I have some original bolts coming from BLT-NT-BOT. thanks, a1

**richard2717** · 02-16-2018, 11:24 AM

Quote:

Originally Posted by a1vintage69

Richard, I will take just one set for now, I ALSO still need one extra screw. Can you throw one in for a couple bucks extra?.Please let me know before I pay you. I have some original bolts coming from BLT-NT-BOT. thanks, a1

Are you saying you do not need the hex head bolts and just need the phillips, or you want a complete set plus one screw? if you need the set plus one just add a buck or so.

Thanks
Richard

Schredder83 · 02-16-2018, 11:30 AM

Richard I will take 1 set please. Paypal sent. Thanks!

**a1vintage69** · 02-16-2018, 11:30 AM

Quote:

Originally Posted by richard2717

Are you saying you do not need the hex head bolts and just need the phillips, or you want a complete set plus one screw? if you need the set plus one just add a buck or so.

Thanks
Richard

i will take a full set a and one screw.

**richard2717** · 02-16-2018, 11:58 AM

Quote:

Originally Posted by Schredder83

Richard I will take 1 set please. Paypal sent. Thanks!

Got it they will ship in the morning

Quote:

Originally Posted by a1vintage69

i will take a full set a and one screw.

pm sent

Payment received will ship in the morning

**richard2717** · 02-16-2018, 12:18 PM

I have enough here for one more set. I just ordered more but it will be a few days b4 they come in.

Harold Holbrook · 02-16-2018, 04:03 PM

Sent PP

**richard2717** · 02-16-2018, 04:39 PM

Quote:

Originally Posted by Harold Holbrook

Sent PP

Got it. They will ship in the morning

thanks

BLT-NT-BOT · 02-16-2018, 06:21 PM

I will take a set if you still have one.

Jothan

**richard2717** · 02-16-2018, 06:24 PM

Quote:

Originally Posted by BLT-NT-BOT

I will take a set if you still have one.

Jothan

Yep one set left.

I have more on the way though and should be here next week.

PP in my sig.
Thanks

BLT-NT-BOT · 02-16-2018, 09:12 PM

Quote:

Originally Posted by richard2717

Yep one set left.

I have more on the way though and should be here next week.

PP in my sig.
Thanks

PayPal sent

02-15-2018, 09:01 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,090	Blazer visor hardware Nov. 1st 2019 just got in 20 more sets still same price I have purchased enough hardware to make up 10 complete sets. If it goes well I will get more if the demand is there. They are not 100% correct but are the closest to original I have seen so far. You have to buy a minimum and not everyone is going to want to do that. The sets consist of (4) of the 5/16-18 x 1" stainless oval head screws the originals were 7/8" long but these work fine without bottoming out. The head diameter on them is also a touch smaller but have been tested and work fine (2) stainless 5/16-18 x 2.5" hex head screws with stainless lock washers 1st class shipping in padded envelope up to 3 sets small flat rate for 4 or more 1 set including shipping and PP fees $17.50 2 sets including shipping & PP fees $30.50 3 sets including shipping & PP fees $39.50 The next to last picture shows original screw on the right and new screw on the left. The last picture shows recommendation from the supplier My PP is in my signature. Make sure your address is included and what you are purchasing please. Edit 2.16.18 1st batch sold out. Have enough for 30 more sets will be here early next week 30 sets showed up today 2-22-18 5 sets already sold have 25 sets left . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type. Last edited by richard2717; 01-08-2024 at 01:51 PM. Reason: shipping cost increase

02-15-2018, 10:05 PM	#2
jondancer Registered User Join Date: Jul 2010 Location: central michigan Posts: 1,194	Re: Blazer visor hardware Nice , I'll be ordering soon

02-16-2018, 01:05 AM	#3
tmontg01 Senior Member Join Date: May 2015 Location: Sierra Vista, Arizona Posts: 398	Re: Blazer visor hardware I'll take 2 sets, thanks Richard!

02-16-2018, 06:41 AM	#4
Harold Holbrook Registered User Join Date: Dec 2017 Location: Garden City , NY Posts: 492	Re: Blazer visor hardware I'll take 1 sets, thanks Richard!

02-16-2018, 07:24 AM	#5
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Blazer visor hardware I'll take a set Richard. Paypal payment sent. __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

02-16-2018, 08:08 AM	#8
mortoyz Active Member Join Date: Nov 2008 Location: Maroa, IL Posts: 123	Re: Blazer visor hardware PP sent. Thanks

02-16-2018, 08:15 AM	#10
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,090	Re: Blazer visor hardware 5 sets left in 1st batch __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-16-2018, 09:34 AM	#11
GSD Guy Registered User Join Date: Jul 2010 Location: Jacksonville, FL Posts: 85	Re: Blazer visor hardware I will take one set please, PP sent. Thanks, Kyle

02-16-2018, 10:31 AM	#13
Rawhedrex Registered User Join Date: Feb 2016 Location: California Posts: 27	Re: Blazer visor hardware I will take 1 set. PayPal Sent! Thanks!

02-16-2018, 11:20 AM	#15
a1vintage69 Senior Member Join Date: Apr 2015 Location: Redding, Ca. Posts: 3,999	Re: Blazer visor hardware Richard, I will take just one set for now, I ALSO still need one extra screw. Can you throw one in for a couple bucks extra?.Please let me know before I pay you. I have some original bolts coming from BLT-NT-BOT. thanks, a1

02-16-2018, 11:30 AM	#17
Schredder83 Registered User Join Date: Oct 2017 Location: Wichita, Ks Posts: 9	Re: Blazer visor hardware Richard I will take 1 set please. Paypal sent. Thanks!

02-16-2018, 12:18 PM	#20
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,090	Re: Blazer visor hardware I have enough here for one more set. I just ordered more but it will be a few days b4 they come in. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-16-2018, 04:03 PM	#21
Harold Holbrook Registered User Join Date: Dec 2017 Location: Garden City , NY Posts: 492	Re: Blazer visor hardware Sent PP

02-16-2018, 06:21 PM	#23
BLT-NT-BOT Registered User Join Date: Feb 2010 Location: Lehi,UT Posts: 804	Re: Blazer visor hardware I will take a set if you still have one. Jothan



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.