IL Parting my project out. 1967 - 1972 Re-Posted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LennyGB53 · 02-13-2011, 10:51 PM

I've decided after this long and the last winter to sell my project 1967 - 1972 truck as parts. I need my garage back. I had this posted and the buyer had to back out so here it is again with what I have that isn't already spoken for. If any of the other parts become available I'll post them later.

1967 small window cab $450
New cab mounts from LMC in package, $40.
Dash Pad $25
Short Flare Side Bed $350
TH350 transmission $75
1969 hood $50.
1969 front fenders $75.
1969 Grille good condition $75.
Bench Seat (needs covered) $25
3 speed and one automatic steering column $25 each.
White Face Gauge set with bezel $30
305 engine from I think a 1987. $75.
Edelbrock Performer Manifold w1406 Edelbrock carb. $125
I also have glove box doors, new center bearing, new combination U Joint, 2 alternators,2 steering pumps, heater control, new master cylinder, power brake booster, heater assembly for non-a/c and one a/c heater core, one radiator. I have stored everything to build a truck including wiring, switches.

I WON'T MESS WITH TRYING TO SHIP OVERSIZED PARTS. If you need something I don't have listed let me know and I'll see if it's here. Thanks for looking. Let me know if you want a picture of anything or care to stop by and see it.

yob2kanobe · 02-13-2011, 10:54 PM

Ill take both the Grant steering wheels shipped to 99338 plz.

heeroyue2002 · 02-13-2011, 10:56 PM

interested in the carb, would you seperate?

mcbassin · 02-13-2011, 10:58 PM

Interested in steering wheel pending some pics and shipping. thanks

VA72C10 · 02-13-2011, 11:19 PM

I will take the white faced gauge set with bezel

can you post a picture?

Also interested in the wiring and switches....what sort (factory?) and is it for A/C or not and is it for gauges, etc...

And interested in the master cylinder and booster

I will take all of these...(of course I need prices for some of it) thanks!

redbaron69 · 02-13-2011, 11:23 PM

pics, condition of auto column. and the 69 grille

CORSAIR · 02-13-2011, 11:36 PM

What size are the wheels?

qksilver · 02-13-2011, 11:39 PM

I would be be interested in the 67 only, interior dash knobs, mirror, vent window handles, door handles and window cranks.

Pm me, i tend to forget.

Thanks,
Steve

CHILLDADDY · 02-14-2011, 01:08 AM

pics and shipping quote on 3 speed column to zip 77013

VA72C10 · 02-14-2011, 01:34 AM

also interested in the U-joint and seatbelts if you have any 67 belts.

and one of the grant wheels if anyone passes....

LennyGB53 · 02-14-2011, 08:54 AM

I will address all of your requests as quickly as possible. Tonight being Valentine's Day I am not sure how much time she will give me to fill those requests. You are not ignored or forgotten and I will answer you're requests.

TripleNickel · 02-14-2011, 09:15 AM

Concerning carb and intake manifold... What is the condition? New, used, rebuilt?

What is the condition of the fenders? Do you have photos?

Based on the answers to these questions, I am interested in both of these pairs of items.

CrashEd · 02-14-2011, 09:53 AM

Edelbrock Performer Manifold w1406 Edelbrock carb. $125
SWB Bed Liner $25
I will take this and would like to look at your other stuff too.
I can come up any time.
Ed

674x4ton · 02-14-2011, 09:56 AM

Can i see pictures of the cab?

Fesser · 02-14-2011, 10:36 AM

So what happened to people like me who posted interest in parts yesterday? Back of the line?

**70STOVEBOLT** · 02-14-2011, 01:51 PM

I may be interested in the under dash wiring harness if you are interested in selling it.

Thanks,
Mark

chevroletrucks · 02-14-2011, 02:18 PM

Interested in cab and doors would like to see pics please.
thanks
Joe

VA72C10 · 02-14-2011, 02:54 PM

Quote:

Originally Posted by Fesser

So what happened to people like me who posted interest in parts yesterday? Back of the line?

Quote:

Originally Posted by Fesser

So what happened to people like me who posted interest in parts yesterday? Back of the line?

I went back and read the original deleted thread and no one said "I'll take it". The general rule (unwritten) is that asking questions about an item does not put anyone "in line". I ran into the same thing where I asked for pictures of an item. I planned to purchase it but wanted to see it first. It was such a good deal someone posted after me that they would take it sight unseen. At that point the person after me now has first chance at the item. It's the only way to keep it fair for everyone.

Since I lost the other sale I now state that I will take the item and then ask for pictures before payment. If it is then not as described then I will pass on it...

VA72C10 · 02-14-2011, 02:55 PM

Quote:

Originally Posted by LennyGB53

I will address all of your requests as quickly as possible. Tonight being Valentine's Day I am not sure how much time she will give me to fill those requests. You are not ignored or forgotten and I will answer you're requests.

Thank you for the update. Please note my response to a question above....

...in the future it would be better to reply to the original thread, instead of deleting it and starting over. That deleting it usually results in confusion and hard feelings.

**70STOVEBOLT** · 02-14-2011, 03:30 PM

I thought only mods could delete a thread?

Toms1968 · 02-14-2011, 03:49 PM

I'll take the white faced gauges, pending photos.

Fesser · 02-14-2011, 04:24 PM

Quote:

Originally Posted by VA72C10

I went back and read the original deleted thread and no one said "I'll take it". The general rule (unwritten) is that asking questions about an item does not put anyone "in line". Since I lost the other sale I now state that I will take the item and then ask for pictures before payment. If it is then not as described then I will pass on it...

I here you but I really don't see a difference. If I say I am interested but want to see a picture, and you say I'll take it but want to see a picture, neither one have us has committed to buy it because we both obviously wanted to see a picture before committing. Oh, well. Live and learn. No hard feelings here, just didn't get what happened.

***Liz*** · 02-14-2011, 04:30 PM

This comes up day in and day out. We have guidelines to help as much as possible.. but in the end, unless you say, I am interested put me in line pending pics or such, no one knows if you are actually wanting the item or not. There are a bunch of folks who reply, ask for pics, and never go back to the thread.

As for deleting, subscribing members do indeed have the ability to delete their own threads. This is for when items have sold etc. It was reinstated as a subscription benefit over a year ago.

LennyGB53 · 02-14-2011, 05:25 PM

2nd in line for steering wheels.

LennyGB53 · 02-14-2011, 05:29 PM

Pictures are there now. Master Cylinder was replaced when I got the truck. Brand new. Booster is original for truck. Wiring is from a couple of different trucks. Cab wiring is both a/c and non a/c. Both for gauges. I do not have the harness for across the rear of the truck for taillights. I have it from the front to the beck except for that one.

02-13-2011, 10:51 PM	#1
LennyGB53 Registered User Join Date: Nov 2008 Location: East Peoria, IL Posts: 149	Parting my project out. 1967 - 1972 Re-Posted I've decided after this long and the last winter to sell my project 1967 - 1972 truck as parts. I need my garage back. I had this posted and the buyer had to back out so here it is again with what I have that isn't already spoken for. If any of the other parts become available I'll post them later. 1967 small window cab $450 New cab mounts from LMC in package, $40. Dash Pad $25 Short Flare Side Bed $350 TH350 transmission $75 1969 hood $50. 1969 front fenders $75. 1969 Grille good condition $75. Bench Seat (needs covered) $25 3 speed and one automatic steering column $25 each. White Face Gauge set with bezel $30 305 engine from I think a 1987. $75. Edelbrock Performer Manifold w1406 Edelbrock carb. $125 I also have glove box doors, new center bearing, new combination U Joint, 2 alternators,2 steering pumps, heater control, new master cylinder, power brake booster, heater assembly for non-a/c and one a/c heater core, one radiator. I have stored everything to build a truck including wiring, switches. I WON'T MESS WITH TRYING TO SHIP OVERSIZED PARTS. If you need something I don't have listed let me know and I'll see if it's here. Thanks for looking. Let me know if you want a picture of anything or care to stop by and see it. Attached Images Last edited by LennyGB53; 02-18-2011 at 06:12 PM.

02-13-2011, 10:54 PM	#2
yob2kanobe Registered User Join Date: Jul 2010 Location: SE Washington state Posts: 80	Re: Parting my project out. 1967 - 1972 Re-Posted Ill take both the Grant steering wheels shipped to 99338 plz.

02-13-2011, 10:56 PM	#3
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: Parting my project out. 1967 - 1972 Re-Posted interested in the carb, would you seperate? __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

02-13-2011, 10:58 PM	#4
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Parting my project out. 1967 - 1972 Re-Posted Interested in steering wheel pending some pics and shipping. thanks __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

02-13-2011, 11:19 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Parting my project out. 1967 - 1972 Re-Posted I will take the white faced gauge set with bezel can you post a picture? Also interested in the wiring and switches....what sort (factory?) and is it for A/C or not and is it for gauges, etc... And interested in the master cylinder and booster I will take all of these...(of course I need prices for some of it) thanks! __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 02-13-2011 at 11:22 PM.

02-13-2011, 11:23 PM	#6
redbaron69 Registered User Join Date: Jan 2009 Location: marion nc Posts: 588	Re: Parting my project out. 1967 - 1972 Re-Posted pics, condition of auto column. and the 69 grille __________________ 69 short fleet 350/350 "under construction" 70 short step 307/3 speed

02-13-2011, 11:36 PM	#7
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Parting my project out. 1967 - 1972 Re-Posted What size are the wheels? __________________ "The Can't Family Lives Across The Street"

02-13-2011, 11:39 PM	#8
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Parting my project out. 1967 - 1972 Re-Posted I would be be interested in the 67 only, interior dash knobs, mirror, vent window handles, door handles and window cranks. Pm me, i tend to forget. Thanks, Steve

02-14-2011, 01:08 AM	#9
CHILLDADDY PIMPING ON A BUDGET Join Date: Sep 2010 Location: HOUSTON,TX Posts: 64	Re: Parting my project out. 1967 - 1972 Re-Posted pics and shipping quote on 3 speed column to zip 77013 __________________ CHILLDADDY

02-14-2011, 01:34 AM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Parting my project out. 1967 - 1972 Re-Posted also interested in the U-joint and seatbelts if you have any 67 belts. and one of the grant wheels if anyone passes.... __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 02-14-2011 at 02:26 PM.

02-14-2011, 08:54 AM	#11
LennyGB53 Registered User Join Date: Nov 2008 Location: East Peoria, IL Posts: 149	Re: Parting my project out. 1967 - 1972 Re-Posted I will address all of your requests as quickly as possible. Tonight being Valentine's Day I am not sure how much time she will give me to fill those requests. You are not ignored or forgotten and I will answer you're requests.

02-14-2011, 09:15 AM	#12
TripleNickel Registered User Join Date: May 2010 Location: Akron, Ohio Posts: 154	Re: Parting my project out. 1967 - 1972 Re-Posted Concerning carb and intake manifold... What is the condition? New, used, rebuilt? What is the condition of the fenders? Do you have photos? Based on the answers to these questions, I am interested in both of these pairs of items.

02-14-2011, 09:53 AM	#13
CrashEd 72 chevy Join Date: Jan 2007 Location: Central Il Posts: 725	Re: Parting my project out. 1967 - 1972 Re-Posted Edelbrock Performer Manifold w1406 Edelbrock carb. $125 SWB Bed Liner $25 I will take this and would like to look at your other stuff too. I can come up any time. Ed

02-14-2011, 09:56 AM	#14
674x4ton Registered User Join Date: Sep 2010 Location: st.joseph mo. Posts: 116	Re: Parting my project out. 1967 - 1972 Re-Posted Can i see pictures of the cab?

02-14-2011, 10:36 AM	#15
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: Parting my project out. 1967 - 1972 Re-Posted So what happened to people like me who posted interest in parts yesterday? Back of the line?



Register or Log In To remove these advertisements.

02-14-2011, 01:51 PM	#16
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,265	Re: Parting my project out. 1967 - 1972 Re-Posted I may be interested in the under dash wiring harness if you are interested in selling it. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

02-14-2011, 02:18 PM	#17
chevroletrucks Registered User Join Date: Sep 2002 Location: Northwest,Indiana Posts: 128	Re: Parting my project out. 1967 - 1972 Re-Posted Interested in cab and doors would like to see pics please. thanks Joe __________________ 67' Chevy C10 Lwb small rear window 71' Gmc 1500 custom 4x4 72' Gmc Grande Sierra

02-14-2011, 03:30 PM	#20
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,265	Re: Parting my project out. 1967 - 1972 Re-Posted I thought only mods could delete a thread? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

02-14-2011, 03:49 PM	#21
Toms1968 Registered User Join Date: Aug 2010 Location: Airmont NY Posts: 72	Re: Parting my project out. 1967 - 1972 Re-Posted I'll take the white faced gauges, pending photos.

02-14-2011, 04:30 PM	#23
*Liz* Catchy title goes here.. Join Date: Mar 2002 Location: Rockwell, NC Posts: 39,737	Re: Parting my project out. 1967 - 1972 Re-Posted This comes up day in and day out. We have guidelines to help as much as possible.. but in the end, unless you say, I am interested put me in line pending pics or such, no one knows if you are actually wanting the item or not. There are a bunch of folks who reply, ask for pics, and never go back to the thread. As for deleting, subscribing members do indeed have the ability to delete their own threads. This is for when items have sold etc. It was reinstated as a subscription benefit over a year ago.

02-14-2011, 05:25 PM	#24
LennyGB53 Registered User Join Date: Nov 2008 Location: East Peoria, IL Posts: 149	Re: Parting my project out. 1967 - 1972 Re-Posted 2nd in line for steering wheels.

02-14-2011, 05:29 PM	#25
LennyGB53 Registered User Join Date: Nov 2008 Location: East Peoria, IL Posts: 149	Re: Parting my project out. 1967 - 1972 Re-Posted Pictures are there now. Master Cylinder was replaced when I got the truck. Brand new. Booster is original for truck. Wiring is from a couple of different trucks. Cab wiring is both a/c and non a/c. Both for gauges. I do not have the harness for across the rear of the truck for taillights. I have it from the front to the beck except for that one. Last edited by LennyGB53; 02-16-2011 at 09:35 PM.

Register or Log In To remove these advertisements.