AC Center vent in non-AC truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

demian5 · 03-13-2017, 05:52 PM

I have a non-AC truck but it has an AC dash (truck has replacement glovebox door with no SPID. Did have a throttle solenoid but its an AC firewall (had apart to do heater core).

My thoughts were to put a T in the passenger defrost duct and run a hose to the center AC vent (and block off the other side).

It also has the ball vents on the sides. I entertained running a duct to near the manual vent opening to where it would direct some of the air to the vents and you could direct to your face.

Anyone done this? I cannot think I would be the only one.

Thanks!

03-13-2017, 05:52 PM	#1
demian5 Registered User Join Date: Aug 2016 Location: Lake Forest, CA Posts: 2,177	AC Center vent in non-AC truck I have a non-AC truck but it has an AC dash (truck has replacement glovebox door with no SPID. Did have a throttle solenoid but its an AC firewall (had apart to do heater core). My thoughts were to put a T in the passenger defrost duct and run a hose to the center AC vent (and block off the other side). It also has the ball vents on the sides. I entertained running a duct to near the manual vent opening to where it would direct some of the air to the vents and you could direct to your face. Anyone done this? I cannot think I would be the only one. Thanks! __________________ "Work hard, use your vacation days." 1970 C15 GMC Long Bed 1986 C20 Scottsdale 1983 K2500 Sierra Classic Suburban 6.2 Instagram: C10sofOC



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.