Air Intake - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Houston Ben · 04-10-2014, 09:30 AM

Hi All,
Need some help with my air intake. As of now I have a modified stock air intake with spectra air filter attached going to the passenger side. This is fine for now but I am going to be putting in a DD high mount A/C system with sanden compressor and I wont be able to use the modified stock air intake as it appears to hug the engine too much.

The other problem I have is it seams all aftermarket stuff is for the circular MAF and not the type I have. Mine is a stick looking one that you have to drill a hole in the intake tube to put it in. Also, my MAF is wired up for passenger side so going the other direction will be too big a pain.

What is everyone using that has the same style MAF I do when they go aftermarket?

Thanks for any help!

littlevictories · 04-10-2014, 10:14 AM

i used the ebay cheapie CAI intake. It came with the adapter needed to go from the truck style maf to the diameter of the tube. I'm sure you could delete that and use the ls3 maf. I know they make a bung you can weld on so it's a super clean install.

when I have time to re-do it properly i'll make my own "kit" from a pile of spectra parts
http://www.summitracing.com/search/p...rder=Ascending

littlevictories · 04-10-2014, 10:17 AM

found this:
http://www.hawksthirdgenparts.com/pr...2dOn-Bung.html

BR3W CITY · 04-10-2014, 12:17 PM

Which maf are u using? Is this this ls3/7 blade style?

Houston Ben · 04-10-2014, 01:55 PM

I will have to look it up, I'm running a 2011 5.3 truck engine.

**First c10** · 04-10-2014, 02:20 PM

My 2011 LC9 has the blade style. I am using a spectra cold air kit designed for the 2011 Silverado truck the motor came from. May add an extension.

Houston Ben · 04-10-2014, 02:22 PM

The delphi AF10060 - Delphi Mass Airflow Sensors looks like the one I have

**First c10** · 04-10-2014, 02:53 PM

Yep that's the one I have. Isnt that the blade style?

**Hart_Rod** · 04-11-2014, 01:33 PM

Quote:

Originally Posted by First c10

Yep that's the one I have. Isnt that the blade style?

This is the blade style:

http://www.hawksthirdgenparts.com/pr...2dOn-Bung.html

**Hart_Rod** · 04-11-2014, 01:34 PM

Does any one think this is worth using?

http://www.hawksthirdgenparts.com/pr...ow-Sensor.html

littlevictories · 04-12-2014, 01:23 AM

whats wrong with the stock one? or are you using blade style? ( i though that was the benefit to the blade style, no need for a screen)

Houston Ben · 04-12-2014, 07:58 AM

Nothing wrong with it for me, I just need to redo my intake and am trying to find a mount or something for it to put on he aftermarket intake. Everything seems to be for the round one.

littlevictories · 04-12-2014, 10:20 AM

oh no, sorry man I was askin Hart why he thinking about adding a screen. I was under the impression that the blade style MAF sensor was used specifically to not have to use a straightener.

I'm new to these motors, and EFI in general so I'm just curious.

Good luck finding the right round bung for your set up.

04-10-2014, 09:30 AM	#1
Houston Ben Registered User Join Date: May 2013 Location: Houston Texas Posts: 713	Air Intake Hi All, Need some help with my air intake. As of now I have a modified stock air intake with spectra air filter attached going to the passenger side. This is fine for now but I am going to be putting in a DD high mount A/C system with sanden compressor and I wont be able to use the modified stock air intake as it appears to hug the engine too much. The other problem I have is it seams all aftermarket stuff is for the circular MAF and not the type I have. Mine is a stick looking one that you have to drill a hole in the intake tube to put it in. Also, my MAF is wired up for passenger side so going the other direction will be too big a pain. What is everyone using that has the same style MAF I do when they go aftermarket? Thanks for any help!

04-10-2014, 10:14 AM	#2
littlevictories Registered User Join Date: Dec 2013 Location: Portland, Ore. Posts: 348	Re: Air Intake i used the ebay cheapie CAI intake. It came with the adapter needed to go from the truck style maf to the diameter of the tube. I'm sure you could delete that and use the ls3 maf. I know they make a bung you can weld on so it's a super clean install. when I have time to re-do it properly i'll make my own "kit" from a pile of spectra parts http://www.summitracing.com/search/p...rder=Ascending

04-10-2014, 10:17 AM	#3
littlevictories Registered User Join Date: Dec 2013 Location: Portland, Ore. Posts: 348	Re: Air Intake found this: http://www.hawksthirdgenparts.com/pr...2dOn-Bung.html

04-10-2014, 12:17 PM	#4
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Air Intake Which maf are u using? Is this this ls3/7 blade style? __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

04-10-2014, 01:55 PM	#5
Houston Ben Registered User Join Date: May 2013 Location: Houston Texas Posts: 713	Re: Air Intake I will have to look it up, I'm running a 2011 5.3 truck engine.

04-10-2014, 02:20 PM	#6
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Air Intake My 2011 LC9 has the blade style. I am using a spectra cold air kit designed for the 2011 Silverado truck the motor came from. May add an extension. __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

04-10-2014, 02:22 PM	#7
Houston Ben Registered User Join Date: May 2013 Location: Houston Texas Posts: 713	Re: Air Intake The delphi AF10060 - Delphi Mass Airflow Sensors looks like the one I have

04-10-2014, 02:53 PM	#8
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Air Intake Yep that's the one I have. Isnt that the blade style? __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

04-11-2014, 01:34 PM	#10
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: Air Intake Does any one think this is worth using? http://www.hawksthirdgenparts.com/pr...ow-Sensor.html __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-12-2014, 01:23 AM	#11
littlevictories Registered User Join Date: Dec 2013 Location: Portland, Ore. Posts: 348	Re: Air Intake whats wrong with the stock one? or are you using blade style? ( i though that was the benefit to the blade style, no need for a screen)

04-12-2014, 07:58 AM	#12
Houston Ben Registered User Join Date: May 2013 Location: Houston Texas Posts: 713	Re: Air Intake Nothing wrong with it for me, I just need to redo my intake and am trying to find a mount or something for it to put on he aftermarket intake. Everything seems to be for the round one.

04-12-2014, 10:20 AM	#13
littlevictories Registered User Join Date: Dec 2013 Location: Portland, Ore. Posts: 348	Re: Air Intake oh no, sorry man I was askin Hart why he thinking about adding a screen. I was under the impression that the blade style MAF sensor was used specifically to not have to use a straightener. I'm new to these motors, and EFI in general so I'm just curious. Good luck finding the right round bung for your set up.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.