Fender Cups - The 1947 - Present Chevrolet & GMC Truck Message Board Network

flashed · 10-14-2018, 11:34 AM

Does anyone make a driver side fender cup yet ? I need one but have had no luck finding one so I assume they still dont make one .

NC_John · 10-14-2018, 02:26 PM

I couldn't find one so I bought a full fender and cut the bottom off to use. I guess driver side fenders don't rot out the way the passenger side does under the battery.

flashed · 10-14-2018, 05:08 PM

I may be forced to do just that to get one .

**atog** · 10-14-2018, 09:41 PM

Lmc does

flashed · 10-14-2018, 09:56 PM

I could not find them in LMC's catalog but I may have overlooked it .

**HIGHWAY BY THE SEA** · 10-14-2018, 10:37 PM

I could not find one at LMC or anywhere, so I am buying a damaged fender and will saw off the bottom cup.

**RenoKeene** · 10-15-2018, 10:44 AM

I've never found one either. Post a link if you find one at LMC or anywhere else.

68Gold/white · 10-15-2018, 10:54 AM

J.C. Whitney?

Andy4639 · 10-15-2018, 11:50 AM

Is this what you seek?

https://www.goodmarkindustries.com/c...3-106-67r.aspx

flashed · 10-15-2018, 11:58 AM

Nope ,that one is available (right side) from all vendors ,looking for a left side (Driver side ) ,which as far as I can find is not made .

Andy4639 · 10-15-2018, 12:10 PM

Quote:

Originally Posted by flashed

Nope ,that one is available (right side) from all vendors ,looking for a left side (Driver side ) ,which as far as I can find is not made .

Yea that one isn't made!

I just remembered the add for the cup.

flashed · 10-15-2018, 12:21 PM

Im really surprised since they make the complete fender they dont just make the cup . Oh well.

Andy4639 · 10-15-2018, 01:46 PM

Quote:

Originally Posted by flashed

Im really surprised since they make the complete fender they dont just make the cup . Oh well.

It makes you wonder why they can make the fenders and the right side cup but not the left. Why they didn't do the mold for the left side is crazy.

NC_John · 10-15-2018, 07:10 PM

Left side doesn't rot out like the right side (no battery acid to deal with) so the demand for the part isn't there. My left side needed to be replaced only because it was squashed from a previous owner mishap/accident.

**dmjlambert** · 10-15-2018, 07:20 PM

This may be a case where premium membership allows you to post a want-to-buy ad, and somebody will probably chop one off of a scrap fender and ship it to you for some reasonable price.

**atog** · 10-15-2018, 07:22 PM

Flashed I stand corrected. That’s for right only. That makes no sense. I may have an extra I can bring ya

flashed · 10-15-2018, 08:27 PM

If you do have one bring it on ,still have no bed for you .

68Gold/white · 10-16-2018, 10:21 AM

Quote:

Originally Posted by NC_John

Left side doesn't rot out like the right side (no battery acid to deal with) so the demand for the part isn't there. My left side needed to be replaced only because it was squashed from a previous owner mishap/accident.

Parts sales are driven by demand!!!

ALL old 67-72 pickups that were not babied or have been garaged for some unusual reason, will have the pass side rotted out, from acid residue leakage.

flashed · 10-16-2018, 10:42 AM

I think mine may be able to be patched with a home made piece maybe . Apparently mice made a home in there and their pe E rotted it out ,same as door bottoms and one cab corner . It's amazing what I cleaned out of that cab . But the old farmer set them up with all they needed ,clothes piled in it ,junk and cow feed ,they had the perfect place .

**richard2717** · 10-16-2018, 05:17 PM

Flashed I think the one I have is good enough for a lower front cup cut. Here are a couple pics.

I need to see if I can get it cut off pretty easy. The inner fender is rotten so I am hoping I can just cut thru it all with sawzall. It does have a dent as shown in pic. I am guessing $45 shipped as long as I can get it in a large flat rate box

.

**zicc1835** · 10-16-2018, 09:50 PM

I have one 45. plus pay pal plus ship no rust thru

flashed · 10-18-2018, 08:52 PM

richard2717
I would do $45 shipped if it will work for you if I can mail a money order ,dont have PayPal.

**zicc1835** · 10-18-2018, 09:47 PM

Quote:

Originally Posted by flashed

richard2717
I would do $45 shipped if it will work for you if I can mail a money order ,dont have PayPal.

thanks for the offer Richard in going to stay with my price MO is ok if you want to PM me an address ill get a ship quote if you like
thanks
Jess

**richard2717** · 10-19-2018, 07:41 AM

Quote:

Originally Posted by flashed

richard2717
I would do $45 shipped if it will work for you if I can mail a money order ,dont have PayPal.

I will get it cut off today to make sure there are no hidden surprises. I will PM you with the results

Thanks
Richard

flashed · 10-19-2018, 02:41 PM

Thanks ,John

10-14-2018, 11:34 AM	#1
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Fender Cups Does anyone make a driver side fender cup yet ? I need one but have had no luck finding one so I assume they still dont make one .

10-14-2018, 02:26 PM	#2
NC_John Registered User Join Date: Jul 2013 Location: Rockwell, NC Posts: 1,639	Re: Fender Cups I couldn't find one so I bought a full fender and cut the bottom off to use. I guess driver side fenders don't rot out the way the passenger side does under the battery. __________________ 1970 C-10 LWB "Blu" Instagram (current build pictures) 70_nc_c10

10-14-2018, 05:08 PM	#3
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Fender Cups I may be forced to do just that to get one .

10-14-2018, 09:41 PM	#4
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,525	Re: Fender Cups Lmc does

10-14-2018, 09:56 PM	#5
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Fender Cups I could not find them in LMC's catalog but I may have overlooked it .

10-14-2018, 10:37 PM	#6
HIGHWAY BY THE SEA Senior Member Join Date: Nov 2012 Location: BY THE CAROLINA SEA Posts: 922	Re: Fender Cups I could not find one at LMC or anywhere, so I am buying a damaged fender and will saw off the bottom cup. __________________ FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009 454 engine w/700R4 transmission gas conversion

10-15-2018, 10:44 AM	#7
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,028	Re: Fender Cups I've never found one either. Post a link if you find one at LMC or anywhere else. __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

10-15-2018, 10:54 AM	#8
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,385	Re: Fender Cups J.C. Whitney?

10-15-2018, 11:50 AM	#9
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Fender Cups Is this what you seek? https://www.goodmarkindustries.com/c...3-106-67r.aspx __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

10-15-2018, 11:58 AM	#10
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Fender Cups Nope ,that one is available (right side) from all vendors ,looking for a left side (Driver side ) ,which as far as I can find is not made .

10-15-2018, 12:21 PM	#12
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Fender Cups Im really surprised since they make the complete fender they dont just make the cup . Oh well.

10-15-2018, 07:10 PM	#14
NC_John Registered User Join Date: Jul 2013 Location: Rockwell, NC Posts: 1,639	Re: Fender Cups Left side doesn't rot out like the right side (no battery acid to deal with) so the demand for the part isn't there. My left side needed to be replaced only because it was squashed from a previous owner mishap/accident. __________________ 1970 C-10 LWB "Blu" Instagram (current build pictures) 70_nc_c10

10-15-2018, 07:20 PM	#15
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,811	Re: Fender Cups This may be a case where premium membership allows you to post a want-to-buy ad, and somebody will probably chop one off of a scrap fender and ship it to you for some reasonable price.

10-15-2018, 07:22 PM	#16
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,525	Re: Fender Cups Flashed I stand corrected. That’s for right only. That makes no sense. I may have an extra I can bring ya

10-15-2018, 08:27 PM	#17
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Fender Cups If you do have one bring it on ,still have no bed for you .



Register or Log In To remove these advertisements.

10-16-2018, 10:42 AM	#19
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Fender Cups I think mine may be able to be patched with a home made piece maybe . Apparently mice made a home in there and their pe E rotted it out ,same as door bottoms and one cab corner . It's amazing what I cleaned out of that cab . But the old farmer set them up with all they needed ,clothes piled in it ,junk and cow feed ,they had the perfect place .

10-16-2018, 05:17 PM	#20
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,091	Re: Fender Cups Flashed I think the one I have is good enough for a lower front cup cut. Here are a couple pics. I need to see if I can get it cut off pretty easy. The inner fender is rotten so I am hoping I can just cut thru it all with sawzall. It does have a dent as shown in pic. I am guessing $45 shipped as long as I can get it in a large flat rate box . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

10-16-2018, 09:50 PM	#21
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,251	Re: Fender Cups I have one 45. plus pay pal plus ship no rust thru Attached Images __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

10-18-2018, 08:52 PM	#22
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Fender Cups richard2717 I would do $45 shipped if it will work for you if I can mail a money order ,dont have PayPal.

10-19-2018, 02:41 PM	#25
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Fender Cups Thanks ,John

Register or Log In To remove these advertisements.