![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Mar 2013
Location: Chester, Md
Posts: 3
|
Any advice on converting column shifter to floor shifter.
Have a 69 Chevy, new to the site. Just asking for any advice or suggestions for the best way to convert the column shifter to the floor or should I just keep it on the tree and beef it up some if possible. Been slacking and haven't mess with her for awhile. Have been thinking about doing this for too long now just would like some ideas from some who has done it before. I'm only 23 years old just learning still.
Thanks a lot guys, Kyle ![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2013
Location: Monroe, NC
Posts: 39
|
Re: Any advice on converting column shifter to floor shifter.
mine was converted when I bought it but it had a cheap Mr gasket shifter in it and it was a piece of trash. removing the old linkage can't be too hard. the install is a breeze on the lokar unit I put back in mine and I highly recommend it. has detents like a factory shifter and is of the same or higher quality.I love it!
Posted via Mobile Device |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2013
Location: Chester, Md
Posts: 3
|
Re: Any advice on converting column shifter to floor shifter.
so you put the column shifter back in it?
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2013
Location: Mickleton, NJ
Posts: 1,776
|
Re: Any advice on converting column shifter to floor shifter.
Basically, you remove all of the original shifter assembly and install whatever shifter you want. The 3-speed in my truck had been already converted when I bought it, but the kit is simple enough. I know Hurst makes a kit for our trucks. Installation of the kit is pretty straightforward, I just did one on my new 4-speed.
You will obviously have to cut a hole in the floor and install a shift boot. Biggest issue comes in if you have a bench seat. I had to do significant modifications to the shifter to make it work with the bench for both the 3-speed and the 4-speed. If you can weld or have a buddy who can help out, you will be fine.
__________________
Shawn 1970 Chevy C-10 SWB, 350, TKO 600 5 speed My build http://67-72chevytrucks.com/vboard/s...d.php?t=559881 |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Mar 2013
Location: Chester, Md
Posts: 3
|
Re: Any advice on converting column shifter to floor shifter.
Yeah i have really been looking at how many guys on here did theirs. Since its a turbo 350 auto trans it shouldnt be extremely hard. Just trying to figure out the best ideas. Thanks. I have the bench seat and from whats i've seen it may be alright just depends how high and what kind of shifter i decide.
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Aug 2012
Location: error 404 location not found
Posts: 816
|
Re: Any advice on converting column shifter to floor shifter.
I have a b&m unimatic shifter on a high hump Tran tunnel. The high humo trans tunnel really made the shifter feel perfect.
Posted via Mobile Device
__________________
1995 s10 blazer 4.3 1967 c10 350/350 fleet short 1993 s10 blazer 4.3l 4l60 RIP 6/20/14 2000 mercury sable Thats a how I roll |
![]() |
![]() |
![]() |
#7 | |
Registered User
Join Date: Jan 2013
Location: Mickleton, NJ
Posts: 1,776
|
Re: Any advice on converting column shifter to floor shifter.
Quote:
__________________
Shawn 1970 Chevy C-10 SWB, 350, TKO 600 5 speed My build http://67-72chevytrucks.com/vboard/s...d.php?t=559881 |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|