CA Parting out 67 Chevy 3/4 ton 2WD - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 05-30-2010, 06:25 PM

I just came down from the mountain with this beat truck that has been sitting for many years. Most of the sheet metal is in bad shape and the wiring has been cut up. The gauge cluster, steering wheel, gas tank, and the glove box are gone. The passenger door is missing, but there is a 72 door in the bed. I'm going to use the back end for a trailer.
The buddy buckets are pending local sale.
sm465 $100 local
hood $80 local
radiator core support $80 local
manual non tilt steering column $40 plus shipping
clutch/brake pedal assembly $25 plus shipping
z bar $20 plus shipping
manual steering box $25 plus shipping
small block engine stands $12 plus shipping
1 blue visor and 1 black visor $10 each plus shipping
grill emblem $15 shipped
grill good shape but hoops are dented $50 plus shipping
Please respond in thread. Thanks, Ray

KrazyRay · 05-30-2010, 06:30 PM

pics

KrazyRay · 05-30-2010, 06:34 PM

more

**too much stuff** · 05-30-2010, 06:48 PM

Price on drivers vent window to 55744?

basemodel67 · 05-30-2010, 06:54 PM

Hey Ray, if buddy bucket deal falls through, put me in line, pending price. I'm close to where you are, so I could pick it up. Thanks!

Cole

**too much stuff** · 05-30-2010, 07:03 PM

Also condition of the drivers side outer door handle, the cst emblem, and the fender emblems with price. Thanks...

KrazyRay · 05-30-2010, 07:34 PM

Quote:

Originally Posted by too much stuff

Also condition of the drivers side outer door handle, the cst emblem, and the fender emblems with price. Thanks...

The driver side vent is $25, the outer door handle has some pitting $10, and the emblems (3) $5 each. That's $50 plus $20 shipping = $70 shipped for everything. Thanks, Ray

**too much stuff** · 05-30-2010, 08:16 PM

Does the vent window still work fine? Is the glass tinted? I am interested in those items. Can you get any better pics of the door handle and window? And let me know the condition of the emblems once removed? I appreciate it, Eric

**Ricks1971** · 05-30-2010, 10:40 PM

not bad for $200

KrazyRay · 05-31-2010, 02:27 PM

Quote:

Originally Posted by too much stuff

Does the vent window still work fine? Is the glass tinted? I am interested in those items. Can you get any better pics of the door handle and window? And let me know the condition of the emblems once removed? I appreciate it, Eric

The vent window is non tinted, it opens and shuts, but I think it could use some lube on the spring because it squeaks. The door emblem is good, the handle has some pitting but works good. The fender emblems look good, but I won't be able to remove them for about a week when I pull the front clip. Thanks, Ray edit: the rubber and felt should be replaced.

KrazyRay · 05-31-2010, 02:34 PM

pl

usmcchevy · 05-31-2010, 02:53 PM

If you'll consider shipping the hood via Grey hound, let me know. If not I completely understand.

**too much stuff** · 05-31-2010, 02:53 PM

In the last pic, is the chrome damaged a little overe 1/2 way up? Or is that a shadow? I can't quite tell...

KrazyRay · 05-31-2010, 03:48 PM

Quote:

Originally Posted by too much stuff

In the last pic, is the chrome damaged a little overe 1/2 way up? Or is that a shadow? I can't quite tell...

That is a shadow. I double checked and there is no damage.

KrazyRay · 06-01-2010, 11:17 PM

basemodel67 pm sent

Tkmadone · 06-01-2010, 11:27 PM

How is the front bumper?

KrazyRay · 06-01-2010, 11:38 PM

Quote:

Originally Posted by Tkmadone

How is the front bumper?

The front bumper is junk. It has been pulled on many times with a chain.

ralphie628 · 06-01-2010, 11:47 PM

how much for the CHEVROLET hood letters? the front bumper brackets? the chevy bowtie? The Chrome hoops on the grill? thanks!

KrazyRay · 06-01-2010, 11:54 PM

The local sale on the buddy buckets fell through. I want to give them a chance to sell local first. $250- they are in bad shape but the frame looks good. basemodel is first up and I will check my pm box to see who else has inquired. Thanks, Ray

KrazyRay · 06-02-2010, 12:12 AM

Quote:

Originally Posted by ralphie628

how much for the CHEVROLET hood letters? the front bumper brackets? the chevy bowtie? The Chrome hoops on the grill? thanks!

The hood letters are $20, the bumper brackets are $20, the bowtie $10, and I want to sell the hoops with the grill for $50. All plus shipping. You are first in line if I ship the buckets. Thanks, Ray

ralphie628 · 06-02-2010, 12:47 AM

Quote:

Originally Posted by KrazyRay

The hood letters are $20, the bumper brackets are $20, the bowtie $10, and I want to sell the hoops with the grill for $50. All plus shipping. You are first in line if I ship the buckets. Thanks, Ray

Well i'm interested in everything except grille. So let me know when you know about the seats. thanks!

ralphie628 · 06-02-2010, 01:16 AM

Quote:

Originally Posted by ralphie628

Well i'm interested in everything except grille. So let me know when you know about the seats. thanks!

hey another thing i need is the ignition spacer.. the piece that goes in between the ingnition bezel and the swith to keep it all straight in the dash.

olred68 · 06-02-2010, 06:27 AM

Pm sent

67 ext cab · 06-02-2010, 08:19 AM

how much for the grill shipped to 25313

KrazyRay · 06-02-2010, 09:44 AM

olred68 is first in line for the passenger fender $40 it has a dent and some dings
67 ext cab- I will get a shipping quote after I pull the grill this weekend.
Thanks, Ray

05-30-2010, 06:25 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting out 67 Chevy 3/4 ton 2WD I just came down from the mountain with this beat truck that has been sitting for many years. Most of the sheet metal is in bad shape and the wiring has been cut up. The gauge cluster, steering wheel, gas tank, and the glove box are gone. The passenger door is missing, but there is a 72 door in the bed. I'm going to use the back end for a trailer. The buddy buckets are pending local sale. sm465 $100 local hood $80 local radiator core support $80 local manual non tilt steering column $40 plus shipping clutch/brake pedal assembly $25 plus shipping z bar $20 plus shipping manual steering box $25 plus shipping small block engine stands $12 plus shipping 1 blue visor and 1 black visor $10 each plus shipping grill emblem $15 shipped grill good shape but hoops are dented $50 plus shipping Please respond in thread. Thanks, Ray Attached Images

05-30-2010, 06:30 PM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 67 Chevy 3/4 ton 2WD pics Attached Images

05-30-2010, 06:34 PM	#3
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 67 Chevy 3/4 ton 2WD more Attached Images

05-30-2010, 06:48 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,707	Re: Parting out 67 Chevy 3/4 ton 2WD Price on drivers vent window to 55744? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-30-2010, 06:54 PM	#5
basemodel67 Factory Strippers Rule! Join Date: Mar 2009 Location: Shingle Springs, CA Posts: 707	Re: Parting out 67 Chevy 3/4 ton 2WD Hey Ray, if buddy bucket deal falls through, put me in line, pending price. I'm close to where you are, so I could pick it up. Thanks! Cole __________________ "Feast your eyes on a feast of smoke." 67 Chevy Short Fleet PLAN: LQ9, 4L60, D60 Looking for School Bus Gauges - Help me out!

05-30-2010, 07:03 PM	#6
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,707	Re: Parting out 67 Chevy 3/4 ton 2WD Also condition of the drivers side outer door handle, the cst emblem, and the fender emblems with price. Thanks... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-30-2010, 08:16 PM	#8
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,707	Re: Parting out 67 Chevy 3/4 ton 2WD Does the vent window still work fine? Is the glass tinted? I am interested in those items. Can you get any better pics of the door handle and window? And let me know the condition of the emblems once removed? I appreciate it, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-30-2010, 10:40 PM	#9
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,781	Re: Parting out 67 Chevy 3/4 ton 2WD not bad for $200

05-31-2010, 02:34 PM	#11
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 67 Chevy 3/4 ton 2WD pl Attached Images

05-31-2010, 02:53 PM	#12
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: Parting out 67 Chevy 3/4 ton 2WD If you'll consider shipping the hood via Grey hound, let me know. If not I completely understand. __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

06-01-2010, 11:17 PM	#15
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 67 Chevy 3/4 ton 2WD basemodel67 pm sent

06-01-2010, 11:27 PM	#16
Tkmadone Registered User Join Date: Aug 2009 Location: Simi Valley, CA Posts: 193	Re: Parting out 67 Chevy 3/4 ton 2WD How is the front bumper?

06-01-2010, 11:47 PM	#18
ralphie628 Registered User Join Date: Dec 2009 Location: Chatsworth CA Posts: 243	Re: Parting out 67 Chevy 3/4 ton 2WD how much for the CHEVROLET hood letters? the front bumper brackets? the chevy bowtie? The Chrome hoops on the grill? thanks!

06-01-2010, 11:54 PM	#19
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 67 Chevy 3/4 ton 2WD The local sale on the buddy buckets fell through. I want to give them a chance to sell local first. $250- they are in bad shape but the frame looks good. basemodel is first up and I will check my pm box to see who else has inquired. Thanks, Ray

06-02-2010, 06:27 AM	#23
olred68 Registered User Join Date: Feb 2009 Location: Knoxville Posts: 207	Re: Parting out 67 Chevy 3/4 ton 2WD Pm sent __________________ Brandon



Register or Log In To remove these advertisements.

06-02-2010, 08:19 AM	#24
67 ext cab Registered User Join Date: Jan 2010 Location: cross lanes west virginia Posts: 52	Re: Parting out 67 Chevy 3/4 ton 2WD how much for the grill shipped to 25313

06-02-2010, 09:44 AM	#25
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 67 Chevy 3/4 ton 2WD olred68 is first in line for the passenger fender $40 it has a dent and some dings 67 ext cab- I will get a shipping quote after I pull the grill this weekend. Thanks, Ray

Register or Log In To remove these advertisements.