MI WTB 1972 4x4 350ci misc parts

[1972 Jimmy]

Hello everyone!
Need your help in finding some misc engine stuff for my 1972 GMC Jimmy 4x4. Looking for the following factory original items for 1972 350ci.
-Valve covers
-Oil fill tube
-Timing chain cover for a 8” balancer (Timing tab spot welded to cover)
-Fan with clutch
-Ram horn exhaust manifolds (can be drilled for smog)
-Passenger side spark plug heat shields

If you have any of these items please post pics so I can see what you have.

Thanks for the help!
Eric

[70CHEVYBB]

I have a set of manifolds I will post pics tomorrow morning

[DLTruck1973]

Originally Posted by 1972 Jimmy

Hello everyone!
Need your help in finding some misc engine stuff for my 1972 GMC Jimmy 4x4. Looking for the following factory original items for 1972 350ci.
-Valve covers
-Oil fill tube
-Timing chain cover for a 8” balancer (Timing tab spot welded to cover)
-Fan with clutch
-Ram horn exhaust manifolds (can be drilled for smog)
-Passenger side spark plug heat shields

If you have any of these items please post pics so I can see what you have.

Thanks for the help!
Eric

Well why didn't you say so

You need the oil fill tube and not the dip stick tube correct?

If you can get me a casting number you want on the manifolds, that would help. I do have several sets of 350 4x4 manifolds here. I will let you kow what I have.

I should be able to help you with most of your list Eric.

Give me some time and I will post you some photos and prices.

Thank you,
Thomas

[1972 Jimmy]

Originally Posted by 70CHEVYBB

I have a set of manifolds I will post pics tomorrow morning

Originally Posted by DLTruck1973

Well why didn't you say so

You need the oil fill tube and not the dip stick tube correct?

If you can get me a casting number you want on the manifolds, that would help. I do have several sets of 350 4x4 manifolds here. I will let you kow what I have.

I should be able to help you with most of your list Eric.

Give me some time and I will post you some photos and prices.

Thank you,
Thomas

Guys thats great!
Thomas sorry for the weak discription. I need the oil fill tube that mounts on the drivers side valve cover. When I get home from work tonight I will pass along what I believe is the correct casting numbers on the manifolds.
Thanks again
Eric

[70CHEVYBB]

Here is what I have.

[1972 Jimmy]

Originally Posted by 70CHEVYBB

Here is what I have.

70CHEVYBB,
Thanks for getting back to me so fast with the photos! The manifolds you show are for a 2wd truck. I'm looking for a 4x4 set which have straight dumps.
Thanks agains,
Eric

[Classycustom71,95]

I have a stock running 307 on a stand. Everything's there from oil pan to valve covers if your interested in any pieces since they bolt up to a 350. The oil fill I have is a long tube with a bracket that bolts onto the intake. I can take pictures tonight.

[1972 Jimmy]

Originally Posted by Classycustom71,95

I have a stock running 307 on a stand. Everything's there from oil pan to valve covers if your interested in any pieces since they bolt up to a 350. The oil fill I have is a long tube with a bracket that bolts onto the intake. I can take pictures tonight.

Great!! Send some pics for me to look at!
Thanks Eric

[DLTruck1973]

Originally Posted by DLTruck1973

Well why didn't you say so

You need the oil fill tube and not the dip stick tube correct?

If you can get me a casting number you want on the manifolds, that would help. I do have several sets of 350 4x4 manifolds here. I will let you kow what I have.

I should be able to help you with most of your list Eric.

Give me some time and I will post you some photos and prices.

Thank you,
Thomas

Hi Eric,

Here is what I can do for you. I have some photos but some of the items on your list I have but need to put my hands on them still. I believe you need the casting number 465 on the drivers side exhaust manifold. I have another matched set (in the photos) that are not 465 but a very nice set. It would also depend on if you are setting up to run the factory heat riser on the pass side. The ones in the photo are very nice and sell for $175.00 plus shipping.

Valve covers are $45.00 for the pair
Timing cover is $20.00
Oil fill tube is $22.50 it will need a little straightening near the mounting hole.
Passenger side spark plug shields are $7.50 each. Have them but need to locate.
Clutch fan blade with no clutch is $40.00 I have a nice one but not at the shop. I may also have a clutch but cannot guaranty it good $25.00

Let me know what you think and I can get everything in one spot and a shipping quote, if interested.

Thank you again,
Thomas

[Classycustom71,95]

Eric,
Here is a couple pictures of what I have. Sorry they are covered in oil. I will be getting everything cleaned up shortly. As far as prices, make me a fair offer.

[1972 Jimmy]

PM Sent

Originally Posted by DLTruck1973

Hi Eric,

Here is what I can do for you. I have some photos but some of the items on your list I have but need to put my hands on them still. I believe you need the casting number 465 on the drivers side exhaust manifold. I have another matched set (in the photos) that are not 465 but a very nice set. It would also depend on if you are setting up to run the factory heat riser on the pass side. The ones in the photo are very nice and sell for $175.00 plus shipping.

Valve covers are $45.00 for the pair
Timing cover is $20.00
Oil fill tube is $22.50 it will need a little straightening near the mounting hole.
Passenger side spark plug shields are $7.50 each. Have them but need to locate.
Clutch fan blade with no clutch is $40.00 I have a nice one but not at the shop. I may also have a clutch but cannot guaranty it good $25.00

Let me know what you think and I can get everything in one spot and a shipping quote, if interested.

Thank you again,
Thomas

[1972 Jimmy]

PM Sent

Originally Posted by Classycustom71,95

Eric,
Here is a couple pictures of what I have. Sorry they are covered in oil. I will be getting everything cleaned up shortly. As far as prices, make me a fair offer.

[DLTruck1973]

Hi Eric,

Here is the other set of manifolds that I have to offer.

I sent you a PM also.

Thank you again,
Thomas