The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Racing and high performance (trucks haulin more than hay)

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-21-2008, 08:37 AM   #1
PA-IndianRider
Registered User
 
PA-IndianRider's Avatar
 
Join Date: Jul 2007
Location: Pittsburgh, PA
Posts: 294
Offenhauser Cross Ram Manifold

<ast weekend when I was at the Parts-a-Rama Swap Meet in Butler, Pa there was a seller who had a LARGE collection of "INTAKE" manifolds for sale. Must have been over 100 of 'em.

In the middle of this collection was an OFFENHAUSER CROSS RAM MANIFOLD. I have always thought these this were awesome looking.... but do NOT know much about how they work on the street/strip????

I'd be happy just to have it "hanging" on my shop wall.... but as most of you already know I am building "60's gasser" look C10..... can't help but wonder how this manifold would LOOK (and run) on top of our SB Stroker motor???

I already have a brand new Edelbrock RPM Air Gap for this build which I read is a very strong performing manifold for a single carb manifold.

The swap meet price for the Cross Ram was $325.... making it too pricey just to "hang on the shop wall"..... I'm a sucker for the "old stuff" Imagine flipping open the one piece fiberglass tilt fronend and seeing that crossram sitting there in all of it's "shinning nostalgic glory"
Attached Images
   
__________________
John aka "Milner"
PA-IndianRider - Pittsburgh, PA
70 Chevy C10 Stepside
"Gasser/Altered Drag Race Hot Rod"
Where were You in '62 ?
PA-IndianRider is offline   Reply With Quote
Old 06-21-2008, 12:40 PM   #2
LONGHAIR
just can't cover up my redneck
 
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
Re: Offenhauser Cross Ram Manifold

It's a hi RPM thing. You would really have to build your engine combination around it....and you may still be "giving away" a little. If you really want it for the wow factor, it could be made to work, maybe not optimal, but cool.
LONGHAIR is offline   Reply With Quote
Old 06-21-2008, 02:30 PM   #3
PA-IndianRider
Registered User
 
PA-IndianRider's Avatar
 
Join Date: Jul 2007
Location: Pittsburgh, PA
Posts: 294
Re: Offenhauser Cross Ram Manifold

Quote:
Originally Posted by LONGHAIR View Post
It's a hi RPM thing. You would really have to build your engine combination around it....and you may still be "giving away" a little. If you really want it for the wow factor, it could be made to work, maybe not optimal, but cool.
That's the "sense" I haave about this thing.... possibly "stored" in my memory bank from "days gone by". If I could pick up one for a resonable price I probably would .... it looks kool just sitting there.
__________________
John aka "Milner"
PA-IndianRider - Pittsburgh, PA
70 Chevy C10 Stepside
"Gasser/Altered Drag Race Hot Rod"
Where were You in '62 ?
PA-IndianRider is offline   Reply With Quote
Old 06-21-2008, 04:55 PM   #4
cdowns
Senior Member
 
cdowns's Avatar
 
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
Re: Offenhauser Cross Ram Manifold

i fooled around with them in the late 60's early 70's/// a very high rpm nonstreetable unit they never really start working till you get up around 6-7thousand rpm and above and you tune it in the morning and it needs to be retuned at night// a much better but still real marginal for the street was the low profile weind crossram// the wall is the perfect place for them tho
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane

MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF

DONT BELIEVE EVERYTHING YOU THINK

TAKE MY ADVISE;I DON'T USE IT ANYWAY
cdowns is offline   Reply With Quote
Old 06-22-2008, 04:41 PM   #5
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: Offenhauser Cross Ram Manifold

NICE FIND!!! Those Offy manafolds are hard to find. I know a guy that running one in his 55 Chevy wagon. He has two 500 cfm Edelbrock carbs. He drive it on both the streets around town and on the highway with know problems. He had to run vacum lines from both sides into one to keep it from loading up. I notice someone has already installed the nipple fittings on the back of yours. Just make sure if you go with a electric chock, just have it one of thr carbs only.
CAL 58 GMC is offline   Reply With Quote
Old 06-23-2008, 05:21 PM   #6
Pyrotechnic
Registered User
 
Pyrotechnic's Avatar
 
Join Date: Feb 2007
Location: Austin, TX
Posts: 3,930
Re: Offenhauser Cross Ram Manifold

This looks a lot different than the box style Z/28 manifold. Actually looks better to me. The runner length actually looks quite long, probably just as good as some dual planes out there.
__________________
1977 GMC Sierra Grande
Pyrotechnic is offline   Reply With Quote
Old 06-23-2008, 05:32 PM   #7
regan wilson
Senior Member
 
regan wilson's Avatar
 
Join Date: Mar 2008
Location: tyler texas
Posts: 1,537
Re: Offenhauser Cross Ram Manifold

You know instead of hanging it on the wall you could take a junk block and heads and paint it up real nice . Put 2 old carbs on it and have a really cool conversation piece in your shop .
__________________
NHRA Super Street 469C
It only runs 10.90 at 156 mph
regan wilson is offline   Reply With Quote
Old 06-23-2008, 05:37 PM   #8
Pyrotechnic
Registered User
 
Pyrotechnic's Avatar
 
Join Date: Feb 2007
Location: Austin, TX
Posts: 3,930
Re: Offenhauser Cross Ram Manifold

While on the topic, I was cruising ebay...check this out....

http://cgi.ebay.com/ebaymotors/SBC-C...m270248882160&

They took one of the 82-84 Crossfire injection intake manifolds, made a cover to mount dual 4 barrels on it, and are trying to pass it off as cross ram manifold. I hope someone unknowing doesn't end up buying that because they will be very disappointed. If it wasn't for those extremely small ports, that might actually work.
__________________
1977 GMC Sierra Grande
Pyrotechnic is offline   Reply With Quote
Old 06-23-2008, 06:22 PM   #9
PA-IndianRider
Registered User
 
PA-IndianRider's Avatar
 
Join Date: Jul 2007
Location: Pittsburgh, PA
Posts: 294
Re: Offenhauser Cross Ram Manifold

Quote:
Originally Posted by regan wilson View Post
You know instead of hanging it on the wall you could take a junk block and heads and paint it up real nice . Put 2 old carbs on it and have a really cool conversation piece in your shop .
Hey Regan you're reading my mind.... I have been looking for a mock up engine (one of those plastic ones) and after I'm done with it (if that day ever comes) I thought I'd dress it up with a nice set of valve covers, oil pan, multiple carb setup, etc and display it in the shop.... got lots of other cool old stuff hanging in the workshop already..... both motorcycle & car stuff.... It's an addiction...ha
__________________
John aka "Milner"
PA-IndianRider - Pittsburgh, PA
70 Chevy C10 Stepside
"Gasser/Altered Drag Race Hot Rod"
Where were You in '62 ?
PA-IndianRider is offline   Reply With Quote
Old 06-23-2008, 06:37 PM   #10
PA-IndianRider
Registered User
 
PA-IndianRider's Avatar
 
Join Date: Jul 2007
Location: Pittsburgh, PA
Posts: 294
Re: Offenhauser Cross Ram Manifold

Quote:
Originally Posted by Pyrotechnic View Post
This looks a lot different than the box style Z/28 manifold. Actually looks better to me. The runner length actually looks quite long, probably just as good as some dual planes out there.
After doing some checking into these manifolds I found that Offenhauser is STILL MAKING them!!!

No doubt these Offy manifolds & the factory cross rams are some of the coolest looking manifolds ever made.... ranking up there with the cross ram manifolds found on the early 60's Mopar big blocks (413) ....ahhhhhh those where the days!!!! ...... or at least I think so!!!! HA!!!!
__________________
John aka "Milner"
PA-IndianRider - Pittsburgh, PA
70 Chevy C10 Stepside
"Gasser/Altered Drag Race Hot Rod"
Where were You in '62 ?
PA-IndianRider is offline   Reply With Quote
Old 06-23-2008, 06:45 PM   #11
Pyrotechnic
Registered User
 
Pyrotechnic's Avatar
 
Join Date: Feb 2007
Location: Austin, TX
Posts: 3,930
Re: Offenhauser Cross Ram Manifold

Where can you buy one and whats the part number ?
__________________
1977 GMC Sierra Grande
Pyrotechnic is offline   Reply With Quote
Old 06-24-2008, 06:48 AM   #12
PA-IndianRider
Registered User
 
PA-IndianRider's Avatar
 
Join Date: Jul 2007
Location: Pittsburgh, PA
Posts: 294
Re: Offenhauser Cross Ram Manifold

Quote:
Originally Posted by Pyrotechnic View Post
Where can you buy one and whats the part number ?
Like me, most people think the Offy Cross Ram manifolds are no longer available. I think this comes from the fact that the Chevy produced Z28 manifold is no longer made.

There is a LOTof info to be found online about the Offy Cross ram everything from suppliers (Summit, Jegs, etc) to performance results, tuning tips, forum thread posts, etc

Here's a few pictures from the SUMMIT Catalog..... Note: Offenhauser manifolds are sold as "bases" & "tops" ..... pricey too.....
Attached Images
   
__________________
John aka "Milner"
PA-IndianRider - Pittsburgh, PA
70 Chevy C10 Stepside
"Gasser/Altered Drag Race Hot Rod"
Where were You in '62 ?

Last edited by PA-IndianRider; 06-24-2008 at 06:54 AM.
PA-IndianRider is offline   Reply With Quote
Old 01-09-2009, 07:16 PM   #13
ncl
Registered User
 
Join Date: Nov 2008
Location: Green Springs, OH
Posts: 18
Re: Offenhauser Cross Ram Manifold

My father just last night was talking to me about this manifold. he had one on a 427 truck block that he built up and installed in a 70 nova. He said he if he built another hot rod it would have to that combo cause he said none of his other muscle cars that he built back in the day could match it. He said the sound of it would make your heart skip a beat but he did run open headers so that could contribute towards it. So now I am on the search so he ahs to build opne again
ncl is offline   Reply With Quote
Old 01-10-2009, 03:05 PM   #14
Alex1
Registered User
 
Alex1's Avatar
 
Join Date: Jul 2007
Location: Ottawa Ontario Canada
Posts: 1,156
Re: Offenhauser Cross Ram Manifold

I just got rid of a Edelbrock cross ram for a BBC with linkage for like $300- it was MINT!
Alex1 is offline   Reply With Quote
Old 01-10-2009, 03:20 PM   #15
royo
Registered User
 
royo's Avatar
 
Join Date: Feb 2007
Location: knoxville tn
Posts: 1,013
Re: Offenhauser Cross Ram Manifold

Quote:
Originally Posted by Alex1 View Post
I just got rid of a Edelbrock cross ram for a BBC with linkage for like $300- it was MINT!
Man as allways daylatedollarshort
__________________
nickle and dime
royo is offline   Reply With Quote
Old 01-31-2017, 12:53 AM   #16
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: Offenhauser Cross Ram Manifold

Okay so I know I'm bring this post up from the grave but I had to post my Offenhausher cross ram intake I bought about a year ago that I'm now installing on my 66 Chevelle.
Attached Images
 
CAL 58 GMC is offline   Reply With Quote
Old 01-31-2017, 09:39 AM   #17
jjzepplin
Registered User
 
jjzepplin's Avatar
 
Join Date: Feb 2012
Location: Ruskin Florida
Posts: 4,566
Re: Offenhauser Cross Ram Manifold

Oh how I would like to hear that running!
__________________
70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller
72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build
Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350
jjzepplin is offline   Reply With Quote
Old 12-29-2022, 11:04 PM   #18
bobshotrodblazer
BigBlockBobby
 
Join Date: Mar 2004
Location: Lake Worth, Florida
Posts: 740
Re: Offenhauser Cross Ram Manifold

Have a Edelbrock crossram on my LS6 crate 454..in my 67 Chevelle. Definitely get the looks.
Attached Images
 
__________________
Bob
bobshotrodblazer is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:40 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com