The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-25-2016, 03:26 PM   #1
Tito19
Registered User
 
Join Date: Feb 2013
Location: Watsonville California
Posts: 47
T221 to NP205 swap guide

This is my guide/experience with swaping the Rockwell T221 for an NP205 in to my 1969 K20.


1) NP205 transfer Case w/ adapter. Adapter shape varies depending on your transmission. My Trans is a SM465 so my adapter is the figure8/ race track/ peanut .ect shape, people have different names for it. I put new gaskets and a coupler before putting it in.
Attached Images
 
Tito19 is offline   Reply With Quote
Old 06-25-2016, 03:33 PM   #2
Tito19
Registered User
 
Join Date: Feb 2013
Location: Watsonville California
Posts: 47
Re: T221 to NP205 swap guide

2) Transfer case Crossmember. I used the stock T221 crossmember. You will need to re-drill the holes through the crossmember into the frame rails due to the length of the new transfer case and adapter. I did this with a 12" long 3/8" drill bit. Using the stock member caused the top of the transfer case to hit the cab floor, so I notched it out. And yes I do have a high hump tunnel and just installed new cab mounts, and it still hit.
2a) I've read that if you use the NP205 transfer case crossmember you will not have this problem. Or you can put spacer between the member and the frame rails.
Attached Images
 

Last edited by Tito19; 06-25-2016 at 03:46 PM.
Tito19 is offline   Reply With Quote
Old 06-25-2016, 03:35 PM   #3
Tito19
Registered User
 
Join Date: Feb 2013
Location: Watsonville California
Posts: 47
Re: T221 to NP205 swap guide

Upper part of the crossmember
Attached Images
 
Tito19 is offline   Reply With Quote
Old 06-25-2016, 03:38 PM   #4
Tito19
Registered User
 
Join Date: Feb 2013
Location: Watsonville California
Posts: 47
Re: T221 to NP205 swap guide

3) Drive Shafts. The NP205 w/ adapter is a longer unit the old T221 so you will need new drive shafts made to the length that you need or cut and lengthen the old ones. I went with new ones from Tom Wood's @ 4xshaft.com. I used a one peace rear driveshaft and choped the carrier bearing mount off and it looks like I will need to notch the support beam to clear the driveshaft. The front just bolted in.
Attached Images
 
Tito19 is offline   Reply With Quote
Old 06-25-2016, 03:40 PM   #5
Tito19
Registered User
 
Join Date: Feb 2013
Location: Watsonville California
Posts: 47
Re: T221 to NP205 swap guide

Carrier bearing mount
Attached Images
 
Tito19 is offline   Reply With Quote
Old 06-25-2016, 03:41 PM   #6
Tito19
Registered User
 
Join Date: Feb 2013
Location: Watsonville California
Posts: 47
Re: T221 to NP205 swap guide

No more carrier bearing mount
Attached Images
 
Tito19 is offline   Reply With Quote
Old 06-25-2016, 03:48 PM   #7
Tito19
Registered User
 
Join Date: Feb 2013
Location: Watsonville California
Posts: 47
Re: T221 to NP205 swap guide

If you have not read Yukon Jacks thread no this subject I suggest you look it up. It will help you get a different perspective on this swap.
Tito19 is offline   Reply With Quote
Reply

Bookmarks

Tags
adapter, k20, np205 pickup, swap, t221


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:45 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com