Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-05-2024, 09:58 AM | #1 |
Active Member
Join Date: Jun 2019
Location: Gaithersburg, MD
Posts: 109
|
Heat/Sound Deadening Plan - Opinions?
For the floor/rearwall I'm looking at the Flatline pre-cut butyl/aluminum foil kits (floor, wall), plus a layer of Siless Liner (closed cell foam), plus a layer of double-sided aluminum foil/cotton jute, then ACC mass-backed carpet.
For the roof I'm looking at Flatline pre-cut kit, plus a layer of Siless Liner, then the USA-1 Industries vinyl wrapped ABS plastic headliner. For the firewall I'm looking at the jute/board OEM-style pad. I'm planning to roll/brush 1-2 coats of Eastwoods rust encapsulator on the firewall and floor first. They are in good shape now. I'm also planning to add some seam sealer where the kick panel sheet metal meets the floor. Any advice? |
08-06-2024, 06:59 AM | #2 |
Registered User
Join Date: Oct 2018
Location: Ontario Peterborough
Posts: 761
|
Re: Heat/Sound Deadening Plan - Opinions?
No advice here , sounds like you got it under control .
|
08-06-2024, 11:34 AM | #3 |
Registered User
Join Date: Oct 2013
Location: Alabama
Posts: 1,220
|
Re: Heat/Sound Deadening Plan - Opinions?
don't discount the doors. a TON of noise and heat/cold is transmitted thru the hollow doors. sound deadener on the backside of the door skin as well as under the door panel will do wonders to help quieten it down & help some with thermal insulation.
|
08-06-2024, 01:57 PM | #4 |
Registered User
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 2,546
|
Re: Heat/Sound Deadening Plan - Opinions?
2nd on the doors being a large noise source. Replace all the rubber and glass channels.
Otherwise looks like a good plan. |
Bookmarks |
|
|