06 LS swap for 65 c10

[Lowl!f3]

Ok guys I need a list of what I need as far as engine mount stuff.

My 65 has a inline six in it.
What engine mount stuff do I need to drop this engine in place?

Frame mounts from the inline six. Will they work?


I even looked at dirty dingos mounts. I am lost and don't want to just buy something I'm not needing.

Dirty dingo sent me an email with links of what they think I need. However all those links are not working.

[Mathew21]

I'm just finishing my 5.3 swap. in my 66' C10. I used "Dingo Slider 1958-72 SBC or BBC to LS Conversion Engine Mounts" and " Slider Engine Truck Mounts 1963-72" . Dirty dingo does not list a part # when I looked them up.

Here is a link to what I ordered. I hope my link works for you.
http://www.dirtydingo.com/shop/index.php?cPath=359_360

[Lowl!f3]

Originally Posted by Mathew21

I'm just finishing my 5.3 swap. in my 66' C10. I used "Dingo Slider 1958-72 SBC or BBC to LS Conversion Engine Mounts" and " Slider Engine Truck Mounts 1963-72" . Dirty dingo does not list a part # when I looked them up.

Here is a link to what I ordered. I hope my link works for you.
http://www.dirtydingo.com/shop/index.php?cPath=359_360

Did your truck have a inline six or v8 before the swap? What did you use for frame mounting?

[Mathew21]

Originally Posted by Lowl!f3

Did your truck have a inline six or v8 before the swap? What did you use for frame mounting?

I had 327 V8. But I was told that the perches are the same for 6cyl and v8 except for the 292.