Aftermarket Valve Covers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RandyP · 09-16-2010, 05:25 PM

So it seems my new crate engine has a cracked valve cover, hair line crack. Cracked none the less. GM basically told me to get bent, so I'm thinking of a set of shiny chrome aftermarkets. I noticed the stock ones have baffles in them, do all the aftermarkets have this as well? Plus I'm having a hard time finding any that have one side with oil filler and a vent hole, and the other side having a vent for the PCV valve. Starting to wonder if I really need the vent from the valve cover to the spacer plate on top of the TBI or not.

87 R10, 350 GM crate engine (not center bolt, old school motor) with TBI intact (for now). Gimme thoughts or suggestions. Have never in my life put aftermarket valve covers on a vehicle, always kept the stock covers.

silvereagle07 · 09-16-2010, 05:47 PM

I saw these at a car show and they looked really nice. They have a variety to choose from. http://www.ansenusa.com/shopdisplayp...ll+Block+Chevy

baclay9 · 09-16-2010, 06:19 PM

If you get chrome hit the bottom side of them (where the gasket sits) with a sanding disk or grinder. If you get the chrome off there you will have a much better chance of no leaks.

**PRattenbury** · 09-16-2010, 06:29 PM

I bought some matte black Edelbrock ones. I'm just not into chrome. Too much maintenance.

S10Fan · 09-16-2010, 06:43 PM

I recently bought a pair of these (Ebay Item Number 200517147898 ) from this seller. I'm very pleased with the covers and shipping was ASAP.

kelsfine69 · 09-16-2010, 07:29 PM

Tell GM to either Replace the cover or they can take the whole thing back and refund your money!! Jeezz After spending that kinda money they could at least replace it!!!

mooseknuckles · 09-16-2010, 07:48 PM

GM has a bunch of aftermarket covers made by proform. I have a set of the black steel ones, but there are alot more styles, and some really nice aluminum ones I wish I would've known about before I bought mine.

RandyP · 09-16-2010, 07:51 PM

So, stupid question here. Do all valve covers have these baffles under them? I just want to be able to use all my hookups with as much ease as possible. Seems all the covers I've seen only have one hole in each side, I need two holes in one side. I also want a real oil filler hole, not a normal hole where I toss a vent cap on it, if that makes sense.

I'll poke around the GM accessory stuff I suppose. Would not mind them saying CHEVROLET one bit.

SBTork · 09-16-2010, 08:08 PM

Almost all of the traditional SBC valve covers have baffles under them. The competition use ones do not. If you find a set you like, just contact the seller/company and ask them. For a street engine they're mandatory.

baclay9 · 09-16-2010, 08:28 PM

Quote:

Originally Posted by mooseknuckles

GM has a bunch of aftermarket covers made by proform. I have a set of the black steel ones, but there are alot more styles, and some really nice aluminum ones I wish I would've known about before I bought mine.

Are you not happy with those? I was planning on getting them for mine.

3r!c84 · 09-16-2010, 09:06 PM

this?

RandyP · 09-16-2010, 09:17 PM

Those are purty! But wow at some of the prices I'm seeing online. I got a little bit of a smaller budget than what I'm seeing. Looks like some cheaper no name branding covers are more in my price range.

irishman999 · 09-16-2010, 09:17 PM

^^Those fabricated valve covers look incredible!

3r!c84 · 09-16-2010, 09:18 PM

Quote:

Originally Posted by RandyP

Those are purty! But wow at some of the prices I'm seeing online. I got a little bit of a smaller budget than what I'm seeing. Looks like some cheaper no name branding covers are more in my price range.

Quote:

Originally Posted by irishman999

^^Those fabricated valve covers look incredible!

i was amazed at how good the welds are.. and only 70$ shipped to my door..

irishman999 · 09-16-2010, 09:22 PM

Quote:

Originally Posted by 3r!c84

i was amazed at how good the welds are.. and only 70$ shipped to my door..

That completely blows me away, i would happily pay 200 bucks for those.

3r!c84 · 09-16-2010, 09:24 PM

they are for sale... 200 (;

*nbpro* · 09-16-2010, 09:31 PM

Lot of the round track guys weld their own oil tube in. Makes it easier. Don't have to bend over in the engine so far. Something to think about is getting those guys to weld it up. I've seen some cheap ones online with 4 holes, but wouldn't buy them. They wouldn't last anytime. I would just demand that GM replace them, or tell them they could have it all back. Oh yeah, junkyards may be your last resort. Clean them up really good and powder coat them is another thought. Good luck.

09-16-2010, 05:25 PM	#1
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Aftermarket Valve Covers So it seems my new crate engine has a cracked valve cover, hair line crack. Cracked none the less. GM basically told me to get bent, so I'm thinking of a set of shiny chrome aftermarkets. I noticed the stock ones have baffles in them, do all the aftermarkets have this as well? Plus I'm having a hard time finding any that have one side with oil filler and a vent hole, and the other side having a vent for the PCV valve. Starting to wonder if I really need the vent from the valve cover to the spacer plate on top of the TBI or not. 87 R10, 350 GM crate engine (not center bolt, old school motor) with TBI intact (for now). Gimme thoughts or suggestions. Have never in my life put aftermarket valve covers on a vehicle, always kept the stock covers. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.

09-16-2010, 05:47 PM	#2
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: Aftermarket Valve Covers I saw these at a car show and they looked really nice. They have a variety to choose from. http://www.ansenusa.com/shopdisplayp...ll+Block+Chevy Attached Images __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

09-16-2010, 06:19 PM	#3
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: Aftermarket Valve Covers If you get chrome hit the bottom side of them (where the gasket sits) with a sanding disk or grinder. If you get the chrome off there you will have a much better chance of no leaks.

09-16-2010, 06:29 PM	#4
PRattenbury Senior Member Join Date: Feb 2010 Location: Maumelle, AR Posts: 478	Re: Aftermarket Valve Covers I bought some matte black Edelbrock ones. I'm just not into chrome. Too much maintenance.

09-16-2010, 06:43 PM	#5
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: Aftermarket Valve Covers I recently bought a pair of these (Ebay Item Number 200517147898 ) from this seller. I'm very pleased with the covers and shipping was ASAP. __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

09-16-2010, 07:29 PM	#6
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Aftermarket Valve Covers Tell GM to either Replace the cover or they can take the whole thing back and refund your money!! Jeezz After spending that kinda money they could at least replace it!!! __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

09-16-2010, 07:48 PM	#7
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: Aftermarket Valve Covers GM has a bunch of aftermarket covers made by proform. I have a set of the black steel ones, but there are alot more styles, and some really nice aluminum ones I wish I would've known about before I bought mine. Attached Images

09-16-2010, 07:51 PM	#8
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: Aftermarket Valve Covers So, stupid question here. Do all valve covers have these baffles under them? I just want to be able to use all my hookups with as much ease as possible. Seems all the covers I've seen only have one hole in each side, I need two holes in one side. I also want a real oil filler hole, not a normal hole where I toss a vent cap on it, if that makes sense. I'll poke around the GM accessory stuff I suppose. Would not mind them saying CHEVROLET one bit. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.

09-16-2010, 08:08 PM	#9
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: Aftermarket Valve Covers Almost all of the traditional SBC valve covers have baffles under them. The competition use ones do not. If you find a set you like, just contact the seller/company and ask them. For a street engine they're mandatory. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

09-16-2010, 09:06 PM	#11
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Aftermarket Valve Covers this? __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

09-16-2010, 09:17 PM	#12
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: Aftermarket Valve Covers Those are purty! But wow at some of the prices I'm seeing online. I got a little bit of a smaller budget than what I'm seeing. Looks like some cheaper no name branding covers are more in my price range. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.

09-16-2010, 09:17 PM	#13
irishman999 Registered User Join Date: May 2010 Location: Reno Ne-VAH-da Posts: 594	Re: Aftermarket Valve Covers ^^Those fabricated valve covers look incredible!

09-16-2010, 09:24 PM	#16
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Aftermarket Valve Covers they are for sale... 200 (; __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

09-16-2010, 09:31 PM	#17
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: Aftermarket Valve Covers Lot of the round track guys weld their own oil tube in. Makes it easier. Don't have to bend over in the engine so far. Something to think about is getting those guys to weld it up. I've seen some cheap ones online with 4 holes, but wouldn't buy them. They wouldn't last anytime. I would just demand that GM replace them, or tell them they could have it all back. Oh yeah, junkyards may be your last resort. Clean them up really good and powder coat them is another thought. Good luck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.