Trans/t-case swap: 350/203 to 465/205 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Matt72blaze · 09-30-2007, 04:30 PM

Hey guys,
Newb here. I just picked up a '72 Blazer with a th350/203 and I'm about to pull the trigger on a 265/203 setup.

My questions:

1) Will I be able to use the same driveshaft? Or really, what's the length difference in the 2?

2) I'm guessing I'll need a different crossmember for the 265/205?

3) Some clutch/flywheel recommendations?

4) Can this be converted to a hydraulic clutch?

5) What other odds & ends parts will I need?

6) Any Portland guys want to have a R&R get together to put this in????? I'll buy the beer/dogs/burgers?????

Oh yea, here's a couple shots of it, I figure it's not too bad for $800

:

and

little rough in the back

jaros44sr · 09-30-2007, 04:44 PM

Welcome to the board from Philly, Pa.

Truck looks pretty good for the 800.00, any issues with rust?

Can't help you out on the swap, but someone will able to help you out in few... J.

Looks like a recent repaint, was it red?More pics. of the interior and engine, pls.

Matt72blaze · 09-30-2007, 04:49 PM

yea, there's some rust in the rockers but that's it. i guess most of it was red at one time. the doors have green under the schieb paint job

09-30-2007, 04:30 PM	#1
Matt72blaze Registered User Join Date: Sep 2007 Location: Wilmington, OH Posts: 60	Trans/t-case swap: 350/203 to 465/205 Hey guys, Newb here. I just picked up a '72 Blazer with a th350/203 and I'm about to pull the trigger on a 265/203 setup. My questions: 1) Will I be able to use the same driveshaft? Or really, what's the length difference in the 2? 2) I'm guessing I'll need a different crossmember for the 265/205? 3) Some clutch/flywheel recommendations? 4) Can this be converted to a hydraulic clutch? 5) What other odds & ends parts will I need? 6) Any Portland guys want to have a R&R get together to put this in????? I'll buy the beer/dogs/burgers????? Oh yea, here's a couple shots of it, I figure it's not too bad for $800 : and little rough in the back __________________ 1970 C20 now a K30 1986 3+3 Dually

09-30-2007, 04:44 PM	#2
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,457	Re: Trans/t-case swap: 350/203 to 465/205 Welcome to the board from Philly, Pa. Truck looks pretty good for the 800.00, any issues with rust? Can't help you out on the swap, but someone will able to help you out in few... J. Looks like a recent repaint, was it red?More pics. of the interior and engine, pls. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 09-30-2007 at 04:48 PM.

09-30-2007, 04:49 PM	#3
Matt72blaze Registered User Join Date: Sep 2007 Location: Wilmington, OH Posts: 60	Re: Trans/t-case swap: 350/203 to 465/205 yea, there's some rust in the rockers but that's it. i guess most of it was red at one time. the doors have green under the schieb paint job __________________ 1970 C20 now a K30 1986 3+3 Dually



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.