Blazer chassis - The 1947 - Present Chevrolet & GMC Truck Message Board Network

thxbug · 07-01-2009, 11:23 PM

This might be hard to answer without a picture. I have a 70 2wd k5 my question is on the chassis at the very rear past the last body mount the rear rails have a very slight angle instead of being straight is this normal.

teamradrz1 · 07-02-2009, 01:48 AM

yes that is where the Blazer frame slopes down for the bumper to attach to it, different than trucks Blazers only use the outer bumper brackets the inner is the frame.

thxbug · 07-03-2009, 12:31 AM

cool thanks for the info i was worried the PO hacked it up back there too

07-01-2009, 11:23 PM	#1
thxbug Registered User Join Date: Jul 2007 Location: California Posts: 50	Blazer chassis This might be hard to answer without a picture. I have a 70 2wd k5 my question is on the chassis at the very rear past the last body mount the rear rails have a very slight angle instead of being straight is this normal.

07-02-2009, 01:48 AM	#2
teamradrz1 Registered User Join Date: Apr 2005 Location: Gresham, OR 97080 Posts: 499	Re: Blazer chassis yes that is where the Blazer frame slopes down for the bumper to attach to it, different than trucks Blazers only use the outer bumper brackets the inner is the frame. __________________ 1971 Chevy Blazer CST 4X4 2012 Camaro 2SS/RS 2007 Avalanche 4X4

07-03-2009, 12:31 AM	#3
thxbug Registered User Join Date: Jul 2007 Location: California Posts: 50	Re: Blazer chassis cool thanks for the info i was worried the PO hacked it up back there too



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.