The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-04-2005, 08:39 PM   #1
dirtybird1
Registered User
 
dirtybird1's Avatar
 
Join Date: Apr 2005
Location: Saint Clair, MI
Posts: 35
4 speed in 84 Silverado

So is the sm465 the only 4 speed offered in these trucks, trying to figure out what i have. I'm almost positive i have the np205 t-case. As i understand these are both pretty badass pieces? I'll add a pic of my sweet ride that i pretty much stole for 1,200 plus my 91 firebird formula w/ no engine
Attached Images
 
dirtybird1 is offline   Reply With Quote
Old 10-06-2005, 07:08 PM   #2
dirtybird1
Registered User
 
dirtybird1's Avatar
 
Join Date: Apr 2005
Location: Saint Clair, MI
Posts: 35
no one?
dirtybird1 is offline   Reply With Quote
Old 10-06-2005, 07:28 PM   #3
1967k30
Senior Member
 
1967k30's Avatar
 
Join Date: Sep 2005
Location: NE
Posts: 363
Is your t-case cast iron? If so it could be a 205.Most 81+ trucks had 208 alluminum t-case's.Most all Chevy 4spd's from 70'/71'-89' were sm465's to my knowledge.I haven't ever seen anything else but have heard of others.How much lift do you have and what size tires?
__________________
01 2500 Duramax,6spd,4x4,Not stock. Estimated
550rwhp/1100rwfp on fuel only.
03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only
67 K10 in many pieces
Little Brothers truck
67 K20 Cummins 12V/NV4500/205,
D60/Eaton w/ Detroit,37" Xterrains,crossover steering,
Future plans,Twins and lots of fuel.
1967k30 is offline   Reply With Quote
Old 10-06-2005, 08:27 PM   #4
JIMs70GMC
user # 2756
 
JIMs70GMC's Avatar
 
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
Smile

how many pto covers? 2=sm465, 1=np435
I believe the only factory 205s were in the 1 tons and had slip yokes(in the 80s) What's the tc shift pattern? tranny shift pattern? the sm465 first is left and forward.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs
1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX
1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears
1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now.....
1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone.
1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed.

1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

Last edited by JIMs70GMC; 10-06-2005 at 08:30 PM.
JIMs70GMC is offline   Reply With Quote
Old 10-06-2005, 09:00 PM   #5
1967k30
Senior Member
 
1967k30's Avatar
 
Join Date: Sep 2005
Location: NE
Posts: 363
Yeah,I forgot to mention that.77'-87' and 88'-91' OBS 1ton's all had 205's except CUCV's.Some were slip yoke,some were not. We have 4 1ton t-case's{86+} and all are fixed yoke.
__________________
01 2500 Duramax,6spd,4x4,Not stock. Estimated
550rwhp/1100rwfp on fuel only.
03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only
67 K10 in many pieces
Little Brothers truck
67 K20 Cummins 12V/NV4500/205,
D60/Eaton w/ Detroit,37" Xterrains,crossover steering,
Future plans,Twins and lots of fuel.
1967k30 is offline   Reply With Quote
Old 10-06-2005, 09:11 PM   #6
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,862
Is this a K/30?They`re the only ones with NP205s.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 10-07-2005, 06:58 AM   #7
Blazer1970
Registered User
 
Blazer1970's Avatar
 
Join Date: Dec 1999
Location: Old Mission, MI, USA
Posts: 2,510
That truck would have come with a 465/208.
__________________
Tim
Blazer1970 is offline   Reply With Quote
Old 10-08-2005, 06:47 PM   #8
67-72williso
Junk/Daily Driver Club
 
67-72williso's Avatar
 
Join Date: Feb 2004
Location: Manheim, PA 17545
Posts: 253
Talking

465 with 32 spline output shaft and a 208. The same as my 86 shortbed.
Later Willis
__________________
Daily Driver: 1970 C-20 400 sbc,sm-465,Dana 61 one ton SRW rear, 3.07 gears, locker.

There are three kinds of people: those who make things happen, those who watch things happen, and those who have no idea what happened!
67-72williso is offline   Reply With Quote
Old 10-14-2005, 05:22 PM   #9
Jason915
Registered User
 
Join Date: Jan 2005
Location: Colorado Springs
Posts: 693
I have seen a limmited number of those trucks with a smaller 4 speed w/o granny gear and 4th is an OD real rare though
__________________
1971 GMC K1500 SWB Fleetside, 4" skyjacker softride and, 14 Bolt FF, HD Dana 44 4.10's

1970 K5 TBI conversion lifted etc SOLD
1968 C20 camper truck SOLD


“To ban guns because criminals use them is to tell the innocent and law-abiding that their rights and liberties depend not on their own conduct, but on the conduct of the guilty and the lawless.” Jeff Snyder
Jason915 is offline   Reply With Quote
Old 10-14-2005, 07:33 PM   #10
Blazer1970
Registered User
 
Blazer1970's Avatar
 
Join Date: Dec 1999
Location: Old Mission, MI, USA
Posts: 2,510
Quote:
Originally Posted by Jason915
I have seen a limmited number of those trucks with a smaller 4 speed w/o granny gear and 4th is an OD real rare though
In a 4WD?
__________________
Tim
Blazer1970 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com