Trailing Arms/ Control Arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ol'Rover · 05-12-2008, 02:21 PM

We noticed awhile ago that the traling arms are rotted.
this is showing where their rotted:

i dont have an actuall picture of them at the moment, since the frame is under a bunch of uther stuff... Anyway we knocked that center part out easily.

Should i repair them? Or Buy new ones?

killer71 · 05-12-2008, 02:24 PM

buy new

Ol'Rover · 05-12-2008, 02:36 PM

ok now my question is... (after looking at LMC)

are they 349.95 each? or for a pair?

**LockDoc** · 05-12-2008, 03:57 PM

-
Check out these two threads....

http://67-72chevytrucks.com/vboard/s...+trailing+arms

http://67-72chevytrucks.com/vboard/s...+trailing+arms

LockDoc

Longhorn Man · 05-12-2008, 04:01 PM

you can get southern ones much cheaper. The guys down south and out west think they are worthless... as it was said to be when i was in washington... "I can't even give them away"

extd56 · 05-12-2008, 04:25 PM

I usually get 100.00 for a good pair around here.

killer71 · 05-12-2008, 04:35 PM

We went with these on the Killer build up! http://www.earlyclassic.com/

Scroll down to the middle of the page.

Ol'Rover · 05-12-2008, 07:13 PM

thanks for the ideas, i like the ones that Ram-Man fabbed up, i might just order them from LMC tho. unless i find sum cheap good cond. southern ones

Longhorn Man · 05-12-2008, 07:33 PM

you have any plans on going to the national board meet?

Ol'Rover · 05-12-2008, 08:10 PM

not this year.

Longhorn Man · 05-12-2008, 08:24 PM

bummer. Good way to get southern parts.
Lotsa fun too.

Ol'Rover · 05-12-2008, 09:45 PM

hmmm....where and when is it?

**tnblazerk5** · 05-12-2008, 11:13 PM

Quote:

Originally Posted by Ol'Rover

hmmm....where and when is it?

http://67-72chevytrucks.com/vboard/f...play.php?f=112

click that and scroll down a bit for the 08 meet, there is also 07 meet pics on there also

Ol'Rover · 05-12-2008, 11:21 PM

wont be making it this year, maybe next year when i get Ol'Rover on the road! Ill look into som trailing arms, since i have 2 sets ill see which ones are better. My dad is pretty keen on repairing them tho...

Robznob11 · 05-12-2008, 11:43 PM

get some nascar ones off ebay for about 200 bucks or less...

Ol'Rover · 05-13-2008, 12:13 AM

pair on Ebay now for 49 bucks...i dont need them yet, but i will soon...so ill keep an eye out.

Ol'Rover · 09-07-2008, 05:29 PM

content removed

http://67-72chevytrucks.com/vboard/a....php?f=50&a=17
In order to post for sale and want to buy ads, you must be a subscriber. anyone may purchase from you however. By subscribing you get a lot of new features, Ability to post Ads in the classified forums, Extra PM storage space, Bold Blue name, and A larger avatar. You can subscribe one of the following ways;

Using PayPal via subscription http://67-72chevytrucks.com/vboard/payments.php

or snail mail with a check/money order

Joshua Brady
PO BOX 154
Rockwell, NC 28138

Please include your board name on the payment.

05-12-2008, 02:21 PM	#1
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Trailing Arms/ Control Arms We noticed awhile ago that the traling arms are rotted. this is showing where their rotted: i dont have an actuall picture of them at the moment, since the frame is under a bunch of uther stuff... Anyway we knocked that center part out easily. Should i repair them? Or Buy new ones? __________________ 1971 C10 Stepper LSX 5.3/4L60E 3.73 12bolt posi. Father Son Project. In Memory of Bruce C. Shorten. Rest easy Dad. Ill take it fryom here. Last edited by Ol'Rover; 05-12-2008 at 02:21 PM.

05-12-2008, 02:24 PM	#2
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Trailing Arms/ Control Arms buy new __________________ R.I.P. Killer 71 10/26/07

05-12-2008, 02:36 PM	#3
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Re: Trailing Arms/ Control Arms ok now my question is... (after looking at LMC) are they 349.95 each? or for a pair? __________________ 1971 C10 Stepper LSX 5.3/4L60E 3.73 12bolt posi. Father Son Project. In Memory of Bruce C. Shorten. Rest easy Dad. Ill take it fryom here.

05-12-2008, 03:57 PM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,436	Re: Trailing Arms/ Control Arms - Check out these two threads.... http://67-72chevytrucks.com/vboard/s...+trailing+arms http://67-72chevytrucks.com/vboard/s...+trailing+arms LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 05-12-2008 at 04:00 PM.

05-12-2008, 04:01 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Trailing Arms/ Control Arms you can get southern ones much cheaper. The guys down south and out west think they are worthless... as it was said to be when i was in washington... "I can't even give them away"

05-12-2008, 04:25 PM	#6
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Trailing Arms/ Control Arms I usually get 100.00 for a good pair around here.

05-12-2008, 04:35 PM	#7
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Trailing Arms/ Control Arms We went with these on the Killer build up! http://www.earlyclassic.com/ Scroll down to the middle of the page. __________________ R.I.P. Killer 71 10/26/07

05-12-2008, 07:13 PM	#8
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Re: Trailing Arms/ Control Arms thanks for the ideas, i like the ones that Ram-Man fabbed up, i might just order them from LMC tho. unless i find sum cheap good cond. southern ones __________________ 1971 C10 Stepper LSX 5.3/4L60E 3.73 12bolt posi. Father Son Project. In Memory of Bruce C. Shorten. Rest easy Dad. Ill take it fryom here. Last edited by Ol'Rover; 05-12-2008 at 07:20 PM.

05-12-2008, 07:33 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Trailing Arms/ Control Arms you have any plans on going to the national board meet?

05-12-2008, 08:10 PM	#10
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Re: Trailing Arms/ Control Arms not this year. __________________ 1971 C10 Stepper LSX 5.3/4L60E 3.73 12bolt posi. Father Son Project. In Memory of Bruce C. Shorten. Rest easy Dad. Ill take it fryom here.

05-12-2008, 08:24 PM	#11
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Trailing Arms/ Control Arms bummer. Good way to get southern parts. Lotsa fun too.

05-12-2008, 09:45 PM	#12
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Re: Trailing Arms/ Control Arms hmmm....where and when is it? __________________ 1971 C10 Stepper LSX 5.3/4L60E 3.73 12bolt posi. Father Son Project. In Memory of Bruce C. Shorten. Rest easy Dad. Ill take it fryom here.

05-12-2008, 11:21 PM	#14
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Re: Trailing Arms/ Control Arms wont be making it this year, maybe next year when i get Ol'Rover on the road! Ill look into som trailing arms, since i have 2 sets ill see which ones are better. My dad is pretty keen on repairing them tho... __________________ 1971 C10 Stepper LSX 5.3/4L60E 3.73 12bolt posi. Father Son Project. In Memory of Bruce C. Shorten. Rest easy Dad. Ill take it fryom here.

05-12-2008, 11:43 PM	#15
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: Trailing Arms/ Control Arms get some nascar ones off ebay for about 200 bucks or less... __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

05-13-2008, 12:13 AM	#16
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Re: Trailing Arms/ Control Arms pair on Ebay now for 49 bucks...i dont need them yet, but i will soon...so ill keep an eye out. __________________ 1971 C10 Stepper LSX 5.3/4L60E 3.73 12bolt posi. Father Son Project. In Memory of Bruce C. Shorten. Rest easy Dad. Ill take it fryom here.



Register or Log In To remove these advertisements.

09-07-2008, 05:29 PM	#17
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Re: Trailing Arms/ Control Arms content removed http://67-72chevytrucks.com/vboard/a....php?f=50&a=17 In order to post for sale and want to buy ads, you must be a subscriber. anyone may purchase from you however. By subscribing you get a lot of new features, Ability to post Ads in the classified forums, Extra PM storage space, Bold Blue name, and A larger avatar. You can subscribe one of the following ways; Using PayPal via subscription http://67-72chevytrucks.com/vboard/payments.php or snail mail with a check/money order Joshua Brady PO BOX 154 Rockwell, NC 28138 Please include your board name on the payment. __________________ 1971 C10 Stepper LSX 5.3/4L60E 3.73 12bolt posi. Father Son Project. In Memory of Bruce C. Shorten. Rest easy Dad. Ill take it fryom here. Last edited by Longhorn Man; 09-07-2008 at 05:48 PM.

Register or Log In To remove these advertisements.