700R4's and my old truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Brainchild · 12-24-2006, 01:24 AM

OK this has prolly been hashed out a million times already.I have a SM465 in my truck ATM,and I am thinking about going with a 700R4 I have.Will the crossmember,and linkage work from a 350TH,or will I have to make up some stuff?What about the driveshaft?
Is there a one piece out of something that will drop right in?WHat works here?

Also how do I wire up the overdrive,or whatever.

I have all the stuff from a donor truck that had an automatic in it,so that is no problem.Also I have the Burb the 700 is in,both in tact.What will I need to do to make htis work out.

Thanks

BarryB · 12-24-2006, 01:12 PM

I did this swap in a Nova I used to owe. All I did was move the trans cross member back 2" so the 700 would drop right in. Oh and I had the drive shaft shortened also. Just make sure your motor is setting level after the swap. Put a level on the carb and level it.

brak · 12-24-2006, 04:02 PM

the overdrive is easy, I prefer the kit from TCI (P/N 376600), it only takes a few minutes to install, converts lockup to vaccum activation, and allows you to add switches to lock the tranny in any gear, or prevent lockup for towing purposes.

it costs around $75.

**LockDoc** · 12-24-2006, 11:06 PM

-
Here's a web site I posted a while back that covers a lot of 700r4 stuff:

http://67-72chevytrucks.com/vboard/s...d.php?t=220252

You might want to check out the "How To Setup Your Driveline" section at the bottom also.

LockDoc

Brainchild · 12-25-2006, 01:16 AM

brak,that's what I was looking for,thanks

I'll have a look over the website in the next few days also LockDoc.

Thanks

brak · 12-25-2006, 02:41 AM

Quote:

Originally Posted by Brainchild

brak,that's what I was looking for,thanks

I'll have a look over the website in the next few days also LockDoc.

Thanks

a couple other companies like painless and bowtie overdrives makes the kit, but the TCI is my favorite.

If you have any questions, shoot me a pm.

12-24-2006, 01:24 AM	#1
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	700R4's and my old truck OK this has prolly been hashed out a million times already.I have a SM465 in my truck ATM,and I am thinking about going with a 700R4 I have.Will the crossmember,and linkage work from a 350TH,or will I have to make up some stuff?What about the driveshaft? Is there a one piece out of something that will drop right in?WHat works here? Also how do I wire up the overdrive,or whatever. I have all the stuff from a donor truck that had an automatic in it,so that is no problem.Also I have the Burb the 700 is in,both in tact.What will I need to do to make htis work out. Thanks __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

12-24-2006, 01:12 PM	#2
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: 700R4's and my old truck I did this swap in a Nova I used to owe. All I did was move the trans cross member back 2" so the 700 would drop right in. Oh and I had the drive shaft shortened also. Just make sure your motor is setting level after the swap. Put a level on the carb and level it.

12-24-2006, 04:02 PM	#3
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: 700R4's and my old truck the overdrive is easy, I prefer the kit from TCI (P/N 376600), it only takes a few minutes to install, converts lockup to vaccum activation, and allows you to add switches to lock the tranny in any gear, or prevent lockup for towing purposes. it costs around $75. __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

12-24-2006, 11:06 PM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,420	Re: 700R4's and my old truck - Here's a web site I posted a while back that covers a lot of 700r4 stuff: http://67-72chevytrucks.com/vboard/s...d.php?t=220252 You might want to check out the "How To Setup Your Driveline" section at the bottom also. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

12-25-2006, 01:16 AM	#5
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	Re: 700R4's and my old truck brak,that's what I was looking for,thanks I'll have a look over the website in the next few days also LockDoc. Thanks __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.