Need a little help with some measurements. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

npc1 · 04-17-2011, 12:40 AM

Can someone help me with getting some measurements? I need to know what the measurement is on a regular swb bed from the inside fender lip to the other inside fender lip and I also need the same thing for the front fenders too. I need this information so I know how much to cut down my rear end. I would get these measurements on my own but as of this moment I dont have a bed for the truck and my front fenders were junk so I tossed them a while back.

If someone could help me with those measurements I would appriciate it a bunch.

JimKshortstep4x4 · 04-17-2011, 05:55 AM

I can get the bed measurement later today but I will need to know where you need the front fender dimension taken. I can get that at the same time if you let me know where to take the measurement.

Jim

JimKshortstep4x4 · 04-17-2011, 09:33 AM

Inside the bedside dimension as measured at the top is 50".

Jim

npc1 · 04-17-2011, 03:05 PM

What Im looking for is this. from the outer lip of the fender to the other outer lip of the other fender in other words how wide is the truck from fender lip to fender lip and on the front I need the same measurement and also if you could measure from the frame to the outer fender lip on the front and rear too that would be nice.

04-17-2011, 12:40 AM	#1
npc1 Registered User Join Date: Mar 2011 Location: denton texas Posts: 80	Need a little help with some measurements. Can someone help me with getting some measurements? I need to know what the measurement is on a regular swb bed from the inside fender lip to the other inside fender lip and I also need the same thing for the front fenders too. I need this information so I know how much to cut down my rear end. I would get these measurements on my own but as of this moment I dont have a bed for the truck and my front fenders were junk so I tossed them a while back. If someone could help me with those measurements I would appriciate it a bunch.

04-17-2011, 05:55 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Need a little help with some measurements. I can get the bed measurement later today but I will need to know where you need the front fender dimension taken. I can get that at the same time if you let me know where to take the measurement. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

04-17-2011, 09:33 AM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Need a little help with some measurements. Inside the bedside dimension as measured at the top is 50". Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

04-17-2011, 03:05 PM	#4
npc1 Registered User Join Date: Mar 2011 Location: denton texas Posts: 80	Re: Need a little help with some measurements. What Im looking for is this. from the outer lip of the fender to the other outer lip of the other fender in other words how wide is the truck from fender lip to fender lip and on the front I need the same measurement and also if you could measure from the frame to the outer fender lip on the front and rear too that would be nice.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.