My 1971 Chevy Wrecker - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BlackHaze · 07-17-2015, 05:41 PM

hello i have read alot on this web site and always wanted to join in and i now can :P i bought this wrecker feb 10th 2015 and have been doing a little here and there on it i doubt i will restore it cost to much and i dont know how lol
Name: 00k0k_h0XlucMDY4h_600x450.jpg
Views: 1168
Size: 58.8 KB

Name: 00k0k_h0XlucMDY4h_600x450.jpg
Views: 1168
Size: 58.8 KB

Name: 00J0J_ay0CrKiOPgo_600x450.jpg
Views: 1045
Size: 48.8 KB

Name: 00V0V_5CopI49IveO_600x450.jpg
Views: 931
Size: 49.3 KB

Name: 00z0z_7jiMGQAzQSN_600x450.jpg
Views: 998
Size: 40.9 KB

70chevytruck · 07-17-2015, 05:47 PM

Welcome.....pretty cool rig.

webfoot · 07-17-2015, 05:48 PM

Cool truck, I bet a little elbow grease on the paint would go a long way, just looks heavil oxidized! Other than that I wouldn't touch it!

BlackHaze · 07-17-2015, 05:55 PM

yea i have used alot of that lol i will get some more pics after i washed it and i have a ? it is stuck in 1st but i had the drive line off and the tranny works and don't make noise but it is stuck in 1st any ideals how to fix (cheap but good)

summitflier · 07-17-2015, 06:06 PM

Is it standard or auto trans? The first thought that comes to mind is the clutch or the linkage.

hugger6933 · 07-17-2015, 06:07 PM

Probably shift tower check that out. the Holmes 440 bed is a great one

BlackHaze · 07-17-2015, 06:11 PM

it is a 4 speed i think it is called a 117mm and the linkage just fixed that i also just put a new clutch kit in it the clutch will disengage like it should but it will not come out of 1st well i guess it is low

BlackHaze · 07-17-2015, 06:15 PM

Quote:

Originally Posted by hugger6933

Probably shift tower check that out. the Holmes 440 bed is a great one

i have had the shifter out and it looks clean inside and i like the 440 as well my dad had a 480 and i didnt like it as much

diggerbob · 07-17-2015, 10:08 PM

I like that wrecker a lot

BlackHaze · 07-18-2015, 04:46 PM

here is some more pics the center where the radio goes i am making a switch plate for the lights and the seat is out of ford

couldnt find one that was a chevy and the grill i also put some ford parts in (the turn signals) i hope it still runs lol :P the bumper is not a 71 or 72 so the lights are not in it i think the bumper is off a 1967 but idk for sure Name: 100_1944.jpg
Views: 659
Size: 46.4 KB

Name: 100_1944.jpg
Views: 659
Size: 46.4 KB

Name: 100_1945.jpg
Views: 651
Size: 38.2 KB

BlackHaze · 07-18-2015, 04:51 PM

Name: 100_1946.jpg
Views: 655
Size: 34.0 KB

Name: 100_1947.jpg
Views: 857
Size: 84.1 KB

BlackHaze · 07-18-2015, 04:55 PM

Name: 100_1948.jpg
Views: 665
Size: 63.7 KB

Name: 100_1950.jpg
Views: 765
Size: 54.4 KB

Name: 100_1951.jpg
Views: 700
Size: 48.0 KB

diggerbob · 07-18-2015, 05:27 PM

Looks like a fun project truck to me!

BlackHaze · 07-18-2015, 05:51 PM

yea i am having fun with it not much rust at all on this truck

2 Far Gone · 07-18-2015, 06:07 PM

Love this rig!!!

BlackHaze · 07-18-2015, 06:14 PM

Quote:

Originally Posted by 2 Far Gone

Love this rig!!!

thanks i am having fun with it

**special-K** · 07-18-2015, 08:48 PM

Anny luck with the shifter or trans? It won't even shift out of first when not running? If you need a transmission, they are pretty easy to find, swap, cheap, etc. And when you are ready to sell just drop me a line. I miss my old '71 wrecker

chopnchaneled · 07-19-2015, 08:48 AM

Howdy and welcome, Your trucks looks like a good one that you can enjoy
and do a few little things along the way.
What part of tenn? was raised in maryville in east tenn., from your pic's looks
like you may be from that area?

BlackHaze · 07-19-2015, 01:28 PM

Quote:

Originally Posted by special-K

Anny luck with the shifter or trans? It won't even shift out of first when not running? If you need a transmission, they are pretty easy to find, swap, cheap, etc. And when you are ready to sell just drop me a line. I miss my old '71 wrecker

not yet i started on the wires looks like they overloaded the back lights and it has burt one of the wires all the way up to the switch didnt hurt the switch but i am going to have to run some wires now lol good thing i know a little about wiring (enough to get me in trouble) the tranny looks good on the inside and didnt make sound i hope it is the rod the shifter fork thing runs on idk what it is called but i am thinking about pulling the top apart and see if it is the problem and as far as selling it i will sell it is going to be in the 127 sale in a few weeks if you are out you could stroll trough and look at her

BlackHaze · 07-19-2015, 01:30 PM

Quote:

Originally Posted by chopnchaneled

Howdy and welcome, Your trucks looks like a good one that you can enjoy
and do a few little things along the way.
What part of tenn? was raised in maryville in east tenn., from your pic's looks
like you may be from that area?

i am in the top of Tennessee next to static (pall mall)looks like about 100 miles from you

Sleepy Cheyenne · 07-19-2015, 01:35 PM

Quote:

Originally Posted by BlackHaze

hello i have read alot on this web site and always wanted to join in and i now can :P i bought this wrecker feb 10th 2015 and have been doing a little here and there on it i doubt i will restore it cost to much and i dont know how lol
Attachment 1426098

Attachment 1426099

Attachment 1426100

Attachment 1426101

I want it

BlackHaze · 07-19-2015, 01:38 PM

Quote:

Originally Posted by Sleepy Cheyenne

I want it

Sleepy Cheyenne · 07-19-2015, 01:43 PM

Quote:

Originally Posted by BlackHaze

That's a bit of a rare bird so hold on to it man.

BlackHaze · 07-19-2015, 01:46 PM

Quote:

Originally Posted by Sleepy Cheyenne

That's a bit of a rare bird so hold on to it man.

i have to ask how it is rare and i think it was bought to be a wrecker looks like the bed was put on when it was bought but i cant say for sure

Sleepy Cheyenne · 07-19-2015, 02:02 PM

Quote:

Originally Posted by BlackHaze

i have to ask how it is rare and i think it was bought to be a wrecker looks like the bed was put on when it was bought but i cant say for sure

Cause from what I can tell that is a original wrecker bed from the factory. The only thing that isn't original is the bumper. Wreckers are harder to find than swb and lwb, the only thing probably a little rarer than that is a lwb stepside

07-17-2015, 05:41 PM	#1
BlackHaze Registered User Join Date: Feb 2015 Location: tennesse Posts: 28	My 1971 Chevy Wrecker hello i have read alot on this web site and always wanted to join in and i now can :P i bought this wrecker feb 10th 2015 and have been doing a little here and there on it i doubt i will restore it cost to much and i dont know how lol __________________ 1971 Chevy Wrecker 350 4 Speed With Holmes 440 Bed. ps,pb but no air

07-17-2015, 05:47 PM	#2
70chevytruck Registered User Join Date: Jun 2007 Location: Buda, Texas Posts: 865	Re: My 1971 Chevy Wrecker Welcome.....pretty cool rig. __________________ 70chevytruck

07-17-2015, 05:48 PM	#3
webfoot Registered User Join Date: Nov 2007 Location: Hermiston, OR Posts: 947	Re: My 1971 Chevy Wrecker Cool truck, I bet a little elbow grease on the paint would go a long way, just looks heavil oxidized! Other than that I wouldn't touch it! __________________ *Running in place gets you nowhere fast.* -me 1968 GTO 4-spd covnvertible 1970 K-20 4-speed, factory AC.

07-17-2015, 05:55 PM	#4
BlackHaze Registered User Join Date: Feb 2015 Location: tennesse Posts: 28	Re: My 1971 Chevy Wrecker yea i have used alot of that lol i will get some more pics after i washed it and i have a ? it is stuck in 1st but i had the drive line off and the tranny works and don't make noise but it is stuck in 1st any ideals how to fix (cheap but good) __________________ 1971 Chevy Wrecker 350 4 Speed With Holmes 440 Bed. ps,pb but no air

07-17-2015, 06:06 PM	#5
summitflier Registered User Join Date: Jun 2015 Location: Ephrata, WA Posts: 308	Re: My 1971 Chevy Wrecker Is it standard or auto trans? The first thought that comes to mind is the clutch or the linkage. __________________ 68 C10 SSB 383 12 Charger 6.4L 12 Accord 3.5L (Wife's ride) 05 Ram 1500 5.7L My build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=676545

07-17-2015, 06:07 PM	#6
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,279	Re: My 1971 Chevy Wrecker Probably shift tower check that out. the Holmes 440 bed is a great one

07-17-2015, 06:11 PM	#7
BlackHaze Registered User Join Date: Feb 2015 Location: tennesse Posts: 28	Re: My 1971 Chevy Wrecker it is a 4 speed i think it is called a 117mm and the linkage just fixed that i also just put a new clutch kit in it the clutch will disengage like it should but it will not come out of 1st well i guess it is low __________________ 1971 Chevy Wrecker 350 4 Speed With Holmes 440 Bed. ps,pb but no air

07-17-2015, 10:08 PM	#9
diggerbob Registered User Join Date: Mar 2005 Location: Bartlett, TN (near Memphis) Posts: 202	Re: My 1971 Chevy Wrecker I like that wrecker a lot

07-18-2015, 04:46 PM	#10
BlackHaze Registered User Join Date: Feb 2015 Location: tennesse Posts: 28	Re: My 1971 Chevy Wrecker here is some more pics the center where the radio goes i am making a switch plate for the lights and the seat is out of ford couldnt find one that was a chevy and the grill i also put some ford parts in (the turn signals) i hope it still runs lol :P the bumper is not a 71 or 72 so the lights are not in it i think the bumper is off a 1967 but idk for sure __________________ 1971 Chevy Wrecker 350 4 Speed With Holmes 440 Bed. ps,pb but no air

07-18-2015, 04:51 PM	#11
BlackHaze Registered User Join Date: Feb 2015 Location: tennesse Posts: 28	Re: My 1971 Chevy Wrecker __________________ 1971 Chevy Wrecker 350 4 Speed With Holmes 440 Bed. ps,pb but no air

07-18-2015, 04:55 PM	#12
BlackHaze Registered User Join Date: Feb 2015 Location: tennesse Posts: 28	Re: My 1971 Chevy Wrecker __________________ 1971 Chevy Wrecker 350 4 Speed With Holmes 440 Bed. ps,pb but no air

07-18-2015, 05:27 PM	#13
diggerbob Registered User Join Date: Mar 2005 Location: Bartlett, TN (near Memphis) Posts: 202	Re: My 1971 Chevy Wrecker Looks like a fun project truck to me!

07-18-2015, 05:51 PM	#14
BlackHaze Registered User Join Date: Feb 2015 Location: tennesse Posts: 28	Re: My 1971 Chevy Wrecker yea i am having fun with it not much rust at all on this truck __________________ 1971 Chevy Wrecker 350 4 Speed With Holmes 440 Bed. ps,pb but no air

07-18-2015, 06:07 PM	#15
2 Far Gone Registered User Join Date: Dec 2013 Location: Smithville, Ontario, Canada Posts: 92	Re: My 1971 Chevy Wrecker Love this rig!!! __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611571

07-18-2015, 08:48 PM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: My 1971 Chevy Wrecker Anny luck with the shifter or trans? It won't even shift out of first when not running? If you need a transmission, they are pretty easy to find, swap, cheap, etc. And when you are ready to sell just drop me a line. I miss my old '71 wrecker __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

07-19-2015, 08:48 AM	#18
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Re: My 1971 Chevy Wrecker Howdy and welcome, Your trucks looks like a good one that you can enjoy and do a few little things along the way. What part of tenn? was raised in maryville in east tenn., from your pic's looks like you may be from that area? __________________ I don't think we get smarter as we get older. We just run out of Stupid things to do.

Register or Log In To remove these advertisements.