Quick Questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

koolky · 12-22-2008, 06:13 PM

#1 Just bought a 72 GMC K2500, what gears would be in it, 4.57 or 4.10???
#2 I was looking up info about 2 of my 350's; one is a TBC (1970) and the power ratings come up as 255hp as expected. The second is TRK (1972) and it comes up as 175hp? Are my sources wrong or was there a power drop?
#3 I’m picking up another 350 (part of the K2500 deal) its block casting 3970010. I’ve been told its high nickel (it's got the 010) and 4 bolt mains. Thing is it’s a 2 barrel? Was this custom ordered or standard in 69 or something?

LuckyHenriksen · 12-22-2008, 06:25 PM

I would think it would have 4:10 gears

72armyswbtruck · 12-22-2008, 09:35 PM

It could be ordered in almost any gear ratio, let me look at my literature tonight and I will tell you what the options were.

koolky · 12-22-2008, 10:10 PM

Quote:

Originally Posted by 72armyswbtruck

It could be ordered in almost any gear ratio, let me look at my literature tonight and I will tell you what the options were.

I have a list of options here but it is from 1970. Also, on the chart it shows that with a 350 and SM465 there would be 4.57* gears standard, than at the bottom of the chart it says *4.10 were used on 4wd trucks with a 350 and SM465 or TurboHyadra.... So im a little confused. Lol

MotorSeven · 12-22-2008, 10:24 PM

There should be a code stamped on top of the axle, passenger side. Mine was pretty faint, but there. Clean it off & use a good shop/flash light & a mirror to find it. I am looking for the link to the codes......

RD

MotorSeven · 12-22-2008, 10:29 PM

Here ya go:

http://www.americanclassic.com/paint.htm

Oh, and it is on the axle tube between the rearend & the hub.

RD

heavy71chevy · 12-22-2008, 11:14 PM

some 350 4bolts were two barell...and some were converted later in there lives.....the 0010 block is indeed the high nickel block and a nice solid foundation to build on..prolly most likely from a truck originally

Gray Ghost · 12-22-2008, 11:24 PM

In 1971 the HP ratings changed from gross to net [basically minus the accessories]. They were also lowered by the automakers to cut insurance costs...some much more than they actually were at the flywheel.

koolky · 12-24-2008, 11:09 PM

Quote:

Originally Posted by MotorSeven

There should be a code stamped on top of the axle, passenger side. Mine was pretty faint, but there. Clean it off & use a good shop/flash light & a mirror to find it. I am looking for the link to the codes......

RD

Went out today to look for the code. I can see where it should be but it is rusted bad enough that i cant make it out... Anyone know for sure what would have come stock? 1972 GMC K2500 350 4 speed. Thanks

**CPNE** · 12-24-2008, 11:32 PM

Quote:

Originally Posted by koolky

Went out today to look for the code. I can see where it should be but it is rusted bad enough that i cant make it out... Anyone know for sure what would have come stock? 1972 GMC K2500 350 4 speed. Thanks

4:10 standard from factory with that engine and tranny. I have same setup, the 307 V8 and I6 trucks had 4:56 standard

12-22-2008, 10:24 PM	#5
MotorSeven Restoration Desperation Join Date: Aug 2006 Location: Tennessee Posts: 373	Re: Quick Questions There should be a code stamped on top of the axle, passenger side. Mine was pretty faint, but there. Clean it off & use a good shop/flash light & a mirror to find it. I am looking for the link to the codes...... RD

12-22-2008, 10:29 PM	#6
MotorSeven Restoration Desperation Join Date: Aug 2006 Location: Tennessee Posts: 373	Re: Quick Questions Here ya go: http://www.americanclassic.com/paint.htm Oh, and it is on the axle tube between the rearend & the hub. RD

12-22-2008, 11:14 PM	#7
heavy71chevy Registered User Join Date: Apr 2007 Location: antreville, south carolina Posts: 873	Re: Quick Questions some 350 4bolts were two barell...and some were converted later in there lives.....the 0010 block is indeed the high nickel block and a nice solid foundation to build on..prolly most likely from a truck originally __________________ "Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster Last edited by heavy71chevy; 12-22-2008 at 11:16 PM.

12-22-2008, 11:24 PM	#8
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: Quick Questions In 1971 the HP ratings changed from gross to net [basically minus the accessories]. They were also lowered by the automakers to cut insurance costs...some much more than they actually were at the flywheel. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

12-22-2008, 06:13 PM	#1
koolky 67-72 Addicted Join Date: Oct 2007 Location: Guelph Ontario Posts: 256	Quick Questions #1 Just bought a 72 GMC K2500, what gears would be in it, 4.57 or 4.10??? #2 I was looking up info about 2 of my 350's; one is a TBC (1970) and the power ratings come up as 255hp as expected. The second is TRK (1972) and it comes up as 175hp? Are my sources wrong or was there a power drop? #3 I’m picking up another 350 (part of the K2500 deal) its block casting 3970010. I’ve been told its high nickel (it's got the 010) and 4 bolt mains. Thing is it’s a 2 barrel? Was this custom ordered or standard in 69 or something?

12-22-2008, 06:25 PM	#2
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Quick Questions I would think it would have 4:10 gears __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-22-2008, 09:35 PM	#3
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: Quick Questions It could be ordered in almost any gear ratio, let me look at my literature tonight and I will tell you what the options were. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.