07-30-2008, 07:14 AM | #1 |
Registered User
Join Date: Jun 2008
Location: MELBOURNE, FLORIDA
Posts: 24
|
Lwb To Swb
I'm Finishing Up A 69 Cst & 72 Sierra Restoration. My New Project Is Putting The Cab & Bed From A Lwb On A Swb Frame That I Have All, From A 1970. Don't Know What Challenges Are Ahead. Will The Lwb Cab Fit Without Modification? I've Seen The Threads On How To Shorten Frame But Can't Find One On Where To Cut The Bed. Will The Shortened Lwb Bed Fit Without Further Modifications? I Don't Want To Cut Before I Measure If You Know What I Mean.
|
07-30-2008, 10:04 AM | #2 |
Junior Member
Join Date: Dec 2006
Location: Southeast Missouri
Posts: 2,436
|
Re: Lwb To Swb
The lwb cab and front clip will fit on the swb frame without any modifications.
We took a '67 lwb cab and front clip and put it on a '69 swb frame and then used '68 running gear. When we did mine we used a swb bed so I don't know of the problems that you will have with cutting down the lwb bed. Danny
__________________
'67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E. |
07-30-2008, 10:19 AM | #3 |
Registered User
Join Date: Apr 2004
Location: Las Vegas, NV
Posts: 2,188
|
Re: Lwb To Swb
As a LWB...
As a SWB.. (RIGHT after the resto... looks a bit different now ) Only modifications involving the conversion was a SWB from a donor truck and sectioning the frame. I converted to a 1 pc driveline, also.
__________________
RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e |
07-30-2008, 10:51 AM | #4 |
I wish I was a cowboy
Join Date: Apr 2008
Location: Rohnert Park, CA
Posts: 409
|
Re: Lwb To Swb
Interesting article, not the way you'll want to do the frame, but includes good info about the bed shortening: link
__________________
-Kris Met list: Cyclone,Wilson,TranzAm,extd56,hotrodhomi,mnky30,Rokcrln,Brad,JerryJones(well, his truck anyway). |
07-30-2008, 06:59 PM | #5 |
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: Lwb To Swb
Check out the builds section.Member Rckcrwlin has done a good write up on this.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
07-30-2008, 08:10 PM | #6 |
Registered User
Join Date: Jun 2007
Location: oregon
Posts: 1,069
|
Re: Lwb To Swb
I am looking for the write up by Rckcrolin any one help please????
__________________
69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears: |
07-30-2008, 10:49 PM | #7 |
Registered User
Join Date: Mar 2008
Location: Waukee, Iowa
Posts: 1,608
|
Re: Lwb To Swb
It's under the projects section under Project Low Buck...or something to that effect.
__________________
build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler |
07-30-2008, 11:13 PM | #8 |
72 Chevelle Club
Join Date: Jun 2007
Location: Newton , Iowa
Posts: 2,052
|
Re: Lwb To Swb
Find a swb bed and sell that good long bed so you don't have to cut it up!! My Opinion of course . Bob
__________________
I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker |
07-31-2008, 01:08 AM | #9 |
Registered User
Join Date: Jun 2007
Location: oregon
Posts: 1,069
|
Re: Lwb To Swb
Thanks,.................I am going to go look right now.
__________________
69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears: |
Bookmarks |
|
|