![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
A day late and $1 short...
Join Date: Dec 2008
Location: Northwest FL
Posts: 3,870
|
![]()
I have my frame stripped of all extraneous pieces and I am ready to clean and prep it for paint. The truck is going to be a driver, so I am going to spray bomb it in my garage with primer and satin black. It has a little surface rust but nothing too bad. I have heard of people using oven cleaner, but have never tried it. I have used a wire wheel on another frame I have, but that... well... it sucks. So, what have you all done, short of taking it to a blaster, that worked well?
__________________
Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD |
![]() |
![]() |
![]() |
#2 |
Restoration Virgin!
Join Date: Jan 2008
Location: Huntersville, NC
Posts: 8,298
|
Re: Clean/strip my frame??
The oven cleaner from the dollar store and a power washer
__________________
Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2011
Location: Southeast Alaska
Posts: 122
|
Re: Clean/strip my frame??
wire wheel is a good start, it will break up all that loose stuff, I'd use POR marine clean, works good, no residue, and biodegradable
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Nov 2010
Location: Grand Terrace, Ca.
Posts: 1,607
|
Re: Clean/strip my frame??
I used oven cleaner on mine and it worked pretty good. The dollar store stuff is cheap (a dollar), contains Sodium Hydroxide (LYE) and works well on grease. The Easy-Off brand is pretty wicked, will remove paint, contains Methylene Cloride (the same stuff that's in paint stripper) and costs about $7 a can. The problem I found was getting the goo out of the hard to reach areas (around rivet heads and such), even with a pressure washer. You have to be careful where you wash the stuff off at, it kills plants (my lawn) and other living things and your local government officials my not like it if you wash it down the gutter.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Mar 2009
Location: rotorua/new zealand
Posts: 161
|
Re: Clean/strip my frame??
i used a combination of oven cleaner,degreaser and a water blaster but i also had to scrap alot with a paint scraper where it was stuck on real thick- unfortunately theres no easy way around it if you want to save on sandblasting/or dipping costs.like has been said already-around the rivits and inside the chassis rails where the crossmembers go is the hardest.
cheers
__________________
1969 stepside-305/4spd/12 bolt posi http://67-72chevytrucks.com/vboard/s...d.php?t=477157 1968 pontiac lemans convertible-350/pwrglde/10 bolt 1934 oldsmobile sedan-350/350/12 bolt posi 1930 model a pickup-350/350/jag ind 1928 model a roadster-283/350/9" |
![]() |
![]() |
![]() |
Bookmarks |
|
|