HD Chromoly Panhard Bars - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GEARBOXGARAGE · 11-04-2012, 11:09 AM

The Gearbox Garage announces the introduction of their G-TR Precicion Components Heavy Duty Double-adjust Chromoly Panhard Bars for '65-72 GM Trucks with coil spring rear suspension with 0"-4" of drop. Introductory retail price is $119.99, forum members save 10%, making the price $107.99. Each kit comes complete with QA1 XM Series Rod Ends and all necessary Grade 8 Hardware to install and are Black Powdercoated.

Custom 68 · 11-06-2012, 10:30 AM

a couple questions:
does this mount in the factory location? and is factory length (only adjustable) or is this a long bar with the additional brackets to mount from side to side? Any install pics?
Thanks
Dave

GEARBOXGARAGE · 11-06-2012, 01:15 PM

Dave,

Yes, this mounts in the factory location for "mild" drop applications of 4" or less. They adjust at both ends through RH and LH threaded Chromoly Rod Ends, so there is no need to remove one end to adjust the position of the rear-end. Just install each end, adjust to desired length, and tighten the jam nuts. I will post up some install pics this evening or early tomorrow.

Thanks,

Mike

SCOTI · 11-06-2012, 07:18 PM

A short 'easily' adjustable PHB has been sorely missed in the market. Kudos for stepping up & filling the need.

chapster · 11-06-2012, 08:21 PM

Quote:

Originally Posted by SCOTI

A short 'easily' adjustable PHB has been sorely missed in the market. Kudos for stepping up & filling the need.

X2

Also really nice to see the hardware as a kit because it is very frustrating dealing with missing hardware and having to wait weeks/months for replacements.

Nice job!

GEARBOXGARAGE · 11-07-2012, 09:45 AM

Thanks, guys! Yeah, we are trying to make our kits as complete as possible, this does increase the cost a little, but much better in the end for the customer.

P.S. We will be posting some install pics later today!

Custom 68 · 11-07-2012, 10:08 AM

Yes this is great news, thanks for the info.

GEARBOXGARAGE · 11-07-2012, 09:10 PM

Install pics on a '66 with 4" drop springs.....

GEARBOXGARAGE · 12-06-2012, 03:44 PM

Still have some of our HD Panhard Bars under the introductory pricing. Forum member price $107.99!

mikey2409 · 01-03-2013, 01:33 AM

Are those panhard bars single or dual sided on the adjuster
Posted via Mobile Device

GEARBOXGARAGE · 01-03-2013, 09:38 AM

Quote:

Originally Posted by mikey2409

Are those panhard bars single or dual sided on the adjuster
Posted via Mobile Device

They are adjustable at both ends, with right and left hand threaded rod ends so the length can be adjusted without removing from the truck.

GEARBOXGARAGE · 04-02-2013, 09:30 PM

Our Extended "Series 2" Panhard Bars are ready to release! They will offer the same quality TIG welded 1-1/4" Chrome-moly tubes and XM Series Rod Ends at both ends to simplify adjustability. All necessary Grade 8 hardware is included, as well as new U-bolts. The trailing arm mount provides 3 holes to adjust roll center, and also moving the mounting point back for a high clearance design when running large diff covers while maintaining a straight bar. Bars and mounting brackets come in Satin Black Powder Coat finish. Retail price is set at $189.99, with forum member discounts set at $15 off!

GEARBOXGARAGE · 12-07-2013, 10:51 AM

Christmas Special Get free shipping along with Forum member pricing of $107.99 on our Series 1 Chrome-moly Panhard Bars. They're fully TIG Welded with an integrated wrench hex on one end for easy tightening of the jam nuts and come Satin Black powder coated. XM Series Chrome-moly heim joints at both ends making adjustments quick and easy without having to unbolt them from the chassis. All Grade 8 mounting hardware is included. These are for stock to mild drops of 4" or less.

SCOTI · 12-07-2013, 12:24 PM

What is the range of length for the shorter bar (for the 6x-72 app)?
Do or can you make 'custom lengths'?
What size are the retaining bolts?

I have a custom app. I noticed this & remembered the OE 6x-72 bars are pretty close to what I need.

chevy-fun · 12-08-2013, 06:39 AM

anything for 73-87 trucks. like to have one for my 10 bolt. prefer a bolt on kit. something similar to ridetech bolt on one in their 4 link kit. but they don't sell it separately.

GEARBOXGARAGE · 12-09-2013, 09:37 AM

SCOTI - The range is approximately 23-1/4" to 24-1/2" with 5/8" bolts to attach the heim joints to the frame. Currently, we are not producing custom lengths.

chevy-fun - Sorry, we don't have anything similar to that bracket at this time.

Number98 · 12-16-2013, 03:46 PM

Do you know if your extended bar will clear the PML Style covers that are deeper for more fluid?

Here is a link to the cover I am referring to: http://www.yourcovers.com/diffcover_6058.php

Thanks,
Jason

GEARBOXGARAGE · 12-16-2013, 06:30 PM

Quote:

Originally Posted by Number98

Do you know if your extended bar will clear the PML Style covers that are deeper for more fluid?

Here is a link to the cover I am referring to: http://www.yourcovers.com/diffcover_6058.php

Thanks,
Jason

Jason,

I can't say for sure as I haven't used these specific covers. We created a mounting point on the trailing arm bracket that would clear T/A style covers, but I'm not sure how much of a dimensional difference there is between the two styles. I'm attaching another shot of our extended bar used in our coil-over set-up, which utilizes the same mounting point on the trailing arm. This angle may help visualize the clearance you are questioning. Sorry I cannot give you a definite answer on this one.

Thanks,

Number98 · 12-22-2013, 11:58 AM

Thanks for the picture....

I actually have a T/A style cover and one of the PM L's, I will dig them both out and measure them out and let you know.

Jason

GEARBOXGARAGE · 12-23-2013, 01:19 AM

Quote:

Originally Posted by Number98

Thanks for the picture....

I actually have a T/A style cover and one of the PM L's, I will dig them both out and measure them out and let you know.

Jason

Jason,

Sounds great, I'm definitely interested in seeing how they compare.

**SIXTY9** · 03-18-2016, 11:15 AM

Are you still selling the panhard bars? That is one very good looking truck yall built.

GEARBOXGARAGE · 03-18-2016, 11:56 AM

Quote:

Originally Posted by SIXTY9

Are you still selling the panhard bars? That is one very good looking truck yall built.

Thanks for the compliment on our shop truck!

Yes we still have them, are you looking at the Series 1 (for 4" drop or less) or the Series 2 (for 5" drop or more)?

**SIXTY9** · 03-18-2016, 12:46 PM

Series 1, I only took it down 1 1/2 inches. Going to pick it up from paint in Georgia in a few weeks. I will be in touch to order it soon. Thanks

GEARBOXGARAGE · 03-19-2016, 10:44 AM

Quote:

Originally Posted by SIXTY9

Series 1, I only took it down 1 1/2 inches. Going to pick it up from paint in Georgia in a few weeks. I will be in touch to order it soon. Thanks

Sounds good.

Thanks!

11-04-2012, 11:09 AM	#1
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	HD Chromoly Panhard Bars The Gearbox Garage announces the introduction of their G-TR Precicion Components Heavy Duty Double-adjust Chromoly Panhard Bars for '65-72 GM Trucks with coil spring rear suspension with 0"-4" of drop. Introductory retail price is $119.99, forum members save 10%, making the price $107.99. Each kit comes complete with QA1 XM Series Rod Ends and all necessary Grade 8 Hardware to install and are Black Powdercoated. Attached Images

11-06-2012, 10:30 AM	#2
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,937	Re: HD Chromoly Panhard Bars a couple questions: does this mount in the factory location? and is factory length (only adjustable) or is this a long bar with the additional brackets to mount from side to side? Any install pics? Thanks Dave __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

11-06-2012, 01:15 PM	#3
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: HD Chromoly Panhard Bars Dave, Yes, this mounts in the factory location for "mild" drop applications of 4" or less. They adjust at both ends through RH and LH threaded Chromoly Rod Ends, so there is no need to remove one end to adjust the position of the rear-end. Just install each end, adjust to desired length, and tighten the jam nuts. I will post up some install pics this evening or early tomorrow. Thanks, Mike

11-06-2012, 07:18 PM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Re: HD Chromoly Panhard Bars A short 'easily' adjustable PHB has been sorely missed in the market. Kudos for stepping up & filling the need. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

11-07-2012, 09:45 AM	#6
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: HD Chromoly Panhard Bars Thanks, guys! Yeah, we are trying to make our kits as complete as possible, this does increase the cost a little, but much better in the end for the customer. P.S. We will be posting some install pics later today!

11-07-2012, 10:08 AM	#7
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,937	Re: HD Chromoly Panhard Bars Yes this is great news, thanks for the info. __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

11-07-2012, 09:10 PM	#8
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: HD Chromoly Panhard Bars Install pics on a '66 with 4" drop springs..... Attached Images

12-06-2012, 03:44 PM	#9
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: HD Chromoly Panhard Bars Still have some of our HD Panhard Bars under the introductory pricing. Forum member price $107.99!

01-03-2013, 01:33 AM	#10
mikey2409 Registered User Join Date: Dec 2012 Location: Bell Gardens Ca Posts: 151	Re: HD Chromoly Panhard Bars Are those panhard bars single or dual sided on the adjuster Posted via Mobile Device

04-02-2013, 09:30 PM	#12
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: HD Chromoly Panhard Bars Our Extended "Series 2" Panhard Bars are ready to release! They will offer the same quality TIG welded 1-1/4" Chrome-moly tubes and XM Series Rod Ends at both ends to simplify adjustability. All necessary Grade 8 hardware is included, as well as new U-bolts. The trailing arm mount provides 3 holes to adjust roll center, and also moving the mounting point back for a high clearance design when running large diff covers while maintaining a straight bar. Bars and mounting brackets come in Satin Black Powder Coat finish. Retail price is set at $189.99, with forum member discounts set at $15 off! Attached Images

12-07-2013, 10:51 AM	#13
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: HD Chromoly Panhard Bars Christmas Special Get free shipping along with Forum member pricing of $107.99 on our Series 1 Chrome-moly Panhard Bars. They're fully TIG Welded with an integrated wrench hex on one end for easy tightening of the jam nuts and come Satin Black powder coated. XM Series Chrome-moly heim joints at both ends making adjustments quick and easy without having to unbolt them from the chassis. All Grade 8 mounting hardware is included. These are for stock to mild drops of 4" or less. Attached Images

12-07-2013, 12:24 PM	#14
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Re: HD Chromoly Panhard Bars What is the range of length for the shorter bar (for the 6x-72 app)? Do or can you make 'custom lengths'? What size are the retaining bolts? I have a custom app. I noticed this & remembered the OE 6x-72 bars are pretty close to what I need. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-08-2013, 06:39 AM	#15
chevy-fun Registered User Join Date: Jun 2011 Location: Arlington, Tx Posts: 338	Re: HD Chromoly Panhard Bars anything for 73-87 trucks. like to have one for my 10 bolt. prefer a bolt on kit. something similar to ridetech bolt on one in their 4 link kit. but they don't sell it separately.

12-09-2013, 09:37 AM	#16
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: HD Chromoly Panhard Bars SCOTI - The range is approximately 23-1/4" to 24-1/2" with 5/8" bolts to attach the heim joints to the frame. Currently, we are not producing custom lengths. chevy-fun - Sorry, we don't have anything similar to that bracket at this time.

12-16-2013, 03:46 PM	#17
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,553	Re: HD Chromoly Panhard Bars Do you know if your extended bar will clear the PML Style covers that are deeper for more fluid? Here is a link to the cover I am referring to: http://www.yourcovers.com/diffcover_6058.php Thanks, Jason



Register or Log In To remove these advertisements.

12-22-2013, 11:58 AM	#19
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,553	Re: HD Chromoly Panhard Bars Thanks for the picture.... I actually have a T/A style cover and one of the PM L's, I will dig them both out and measure them out and let you know. Jason

03-18-2016, 11:15 AM	#21
SIXTY9 Senior Member Join Date: Jan 2013 Location: North Charleston SC Posts: 504	Re: HD Chromoly Panhard Bars Are you still selling the panhard bars? That is one very good looking truck yall built.

03-18-2016, 12:46 PM	#23
SIXTY9 Senior Member Join Date: Jan 2013 Location: North Charleston SC Posts: 504	Re: HD Chromoly Panhard Bars Series 1, I only took it down 1 1/2 inches. Going to pick it up from paint in Georgia in a few weeks. I will be in touch to order it soon. Thanks

Register or Log In To remove these advertisements.