Big block mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kwmech** · 09-16-2005, 09:58 PM

Looking for the RUBBER the 2 piece kind from 68-71. I am looking for new. The GM dealer doesn't have them anymore and there is no listing at NAPA. What I am doing is moving my small block backwards with the big block stands so the fan will sit in the same place with the serpentine kit. I already have to do the exhaust anyways and I am putting in a gear vendor.

**kwmech** · 09-17-2005, 09:10 PM

33 lookies and no answer? Somebody has to have an idea

corn · 09-17-2005, 10:39 PM

I installed a small block in the stock location using all of my stock big block mounts. Rubbers and all. I went to get a new rubber mount & they showed the newer style mounts for the 396 but showed the one I needed listed under 6 cyl. I got it at O'rielly auto parts. It may be worth going back to check...corn

**kwmech** · 09-17-2005, 11:20 PM

I am using the big block steel frame stands, so I need the big block cushions--upper and lower.

**Classic Heartbeat** · 09-17-2005, 11:39 PM

We are doing a search and have found one set so far for one of our Canadian customers. I may have a couple more coming. These have been discontinued now from GM and so far nobody that we know of is reproducing them. WES www.ClassicHeartbeat.com

**BIGJAKE97** · 09-18-2005, 01:00 AM

lmc has them, part #34-0329, their price is$79.95 plus shipping. that's the spring 2005 (cb.40) catolog. I just happen to find a summer 2001 catolog first and the price is 39.95, wow. If you don't want to order from the idiots at lmc, bill at vintage chevy trucks, 510-651-5874, in fremont ca, should also have the mounts. the mounts are made in india, not tawian, isn't that a surpise. Make sure you tap the nut in the mount before you start a bolt in it, you won't be happy with the results if you don't! hope this helps. good luck!

**kwmech** · 09-18-2005, 12:16 PM

Thank guys, I'll make some calls on monday.

**uncle** · 09-18-2005, 02:02 PM

I got some from Pickmup.

gregsplace · 09-18-2005, 03:16 PM

I've ordered mine from GMCPauls.

David Johnson · 09-18-2005, 05:09 PM

You can use pads from a small block. All you do is use a bigger washer. Txfirefighter posted a how-to thread on this. I did it, worked great, cost about $20 (and I had a pair of big block cushions).

Tx Firefighter · 09-18-2005, 07:05 PM

Quote:

Originally Posted by David Johnson

You can use pads from a small block. All you do is use a bigger washer. Txfirefighter posted a how-to thread on this. I did it, worked great, cost about $20 (and I had a pair of big block cushions).

It's in the FAQ section....

09-16-2005, 09:58 PM	#1
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,480	Big block mounts Looking for the RUBBER the 2 piece kind from 68-71. I am looking for new. The GM dealer doesn't have them anymore and there is no listing at NAPA. What I am doing is moving my small block backwards with the big block stands so the fan will sit in the same place with the serpentine kit. I already have to do the exhaust anyways and I am putting in a gear vendor.

09-17-2005, 11:39 PM	#5
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	We are doing a search and have found one set so far for one of our Canadian customers. I may have a couple more coming. These have been discontinued now from GM and so far nobody that we know of is reproducing them. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

09-18-2005, 01:00 AM	#6
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 264	lmc has them, part #34-0329, their price is$79.95 plus shipping. that's the spring 2005 (cb.40) catolog. I just happen to find a summer 2001 catolog first and the price is 39.95, wow. If you don't want to order from the idiots at lmc, bill at vintage chevy trucks, 510-651-5874, in fremont ca, should also have the mounts. the mounts are made in india, not tawian, isn't that a surpise. Make sure you tap the nut in the mount before you start a bolt in it, you won't be happy with the results if you don't! hope this helps. good luck! __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

09-18-2005, 02:02 PM	#8
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Mounts I got some from Pickmup.

09-18-2005, 03:16 PM	#9
gregsplace Senior Member Join Date: Dec 2000 Location: Colwich,Kansas Posts: 713	I've ordered mine from GMCPauls. __________________ 67 3/4 4x4 402,a/t,flat bed 98 GMC Sierra swb daily driver 87 burb parting out. 68 1/2 chevy, 350/350, 71 gmc frame, kid's beater 69 1ton 396-4sp, dump 69 swb stepside 396/400th current frameup 67 swb 454/400th rebuilding now, oldest boy just rolled it 99,HD, Road King Classic Colwich Ks

09-17-2005, 09:10 PM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,480	33 lookies and no answer? Somebody has to have an idea

09-17-2005, 10:39 PM	#3
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	I installed a small block in the stock location using all of my stock big block mounts. Rubbers and all. I went to get a new rubber mount & they showed the newer style mounts for the 396 but showed the one I needed listed under 6 cyl. I got it at O'rielly auto parts. It may be worth going back to check...corn

09-17-2005, 11:20 PM	#4
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,480	I am using the big block steel frame stands, so I need the big block cushions--upper and lower.

09-18-2005, 12:16 PM	#7
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,480	Thank guys, I'll make some calls on monday.

09-18-2005, 05:09 PM	#10
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	You can use pads from a small block. All you do is use a bigger washer. Txfirefighter posted a how-to thread on this. I did it, worked great, cost about $20 (and I had a pair of big block cushions).



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.