Driveshaft compatability - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hgs_notes · 06-08-2007, 10:18 AM

I have the 72 Junkyard Jimmy with the AWOL drive train. I can get a tranny and transfercase from a 74 blazer for a bargain but was wondering about using the driveshafts from the 74. I know they will work with the transfercase, but will the length and U-joint style or size be compatible with my 72 axles? The tranny is the same TH350, but the transfer case I'm pretty sure is the NP203. I would think the axles on the 74 are probably the same, but I don't know. The length would depend on the position of the engine mounts compared to the 72. Any help or info here would be appreciated.

HG

06-08-2007, 10:18 AM	#1
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,121	Driveshaft compatability I have the 72 Junkyard Jimmy with the AWOL drive train. I can get a tranny and transfercase from a 74 blazer for a bargain but was wondering about using the driveshafts from the 74. I know they will work with the transfercase, but will the length and U-joint style or size be compatible with my 72 axles? The tranny is the same TH350, but the transfer case I'm pretty sure is the NP203. I would think the axles on the 74 are probably the same, but I don't know. The length would depend on the position of the engine mounts compared to the 72. Any help or info here would be appreciated. HG __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.