'68 c10 build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Camaroguy · 12-08-2016, 04:02 PM

This build started on 09/26/2016 as a father and son project with the idea of selling it when complete. I decided to start a thread today so I'll be adding a bunch of pics in a row.

I don't have a lot of information about the truck to begin with but we started with a 1968 cab. The frame VIN matched the cab and is a short bed. It is a leaf spring truck which isn't anything I have dealt with before on these.

My dad owns his own hot rod shop (Wild West Street Rods) and they work on it it periodically throughout the day when waiting on stuff for other projects. Due to my work, I am only able to devote about three hours a day, four days a week to it.

Camaroguy · 12-08-2016, 04:04 PM

Here is the frame we started with. It was in really nice condition. We added a Brother's bolt in c-notch (welded) prior to sending it out for powder coating.

Camaroguy · 12-08-2016, 04:06 PM

This truck had rust in both rockers and cab corners.

Camaroguy · 12-08-2016, 04:09 PM

Rust repair continued on the other side.

Camaroguy · 12-08-2016, 04:12 PM

Rust repair continued on doors. Additionally, speaker holes were filled, and rust preventer put on the cab floors. The cab floors were actually pretty solid. We also added a high-hump transmission tunnel.

Camaroguy · 12-08-2016, 04:14 PM

Started smoothing the firewall and the beginning of bodywork.

jricharc · 12-08-2016, 05:08 PM

Sick build, gonna be bad ass!

Camaroguy · 12-08-2016, 08:15 PM

Quote:

Originally Posted by jricharc

Sick build, gonna be bad ass!

Thank you!

Camaroguy · 12-08-2016, 08:23 PM

Here are a couple of other pics I wanted to upload. It shows the test fitting of the door and filling of the gas tank filler.

Also, the Boss 338's we originally wanted to go with. I'm a little disappointed we couldn't use them because I'm partial to them on these trucks; however, there sure are a lot of these truck out there with them on it.

FRCvette · 12-08-2016, 08:28 PM

Sweet build man. I will b watching this so keep the pics coming.

Camaroguy · 12-08-2016, 08:33 PM

Quote:

Originally Posted by FRCvette

Sweet build man. I will b watching this so keep the pics coming.

Thanks! I will be posting pics at least weakly. The goal is to have it painted by March or April.

forcd02 · 12-09-2016, 09:23 AM

Great job, thanks for the pics-i am just starting my 70 build
Did you use the stock frame brackets? mine has a 6 banger, have
a 5.3 LS going in-the 6 banger used a single bolt motor mount,
I have some DD engine adapters from another project, thought I
could use them
Keep the pics coming

**GAc10boy** · 12-09-2016, 04:19 PM

Love the US Mags. Glad you went with those!

Camaroguy · 12-12-2016, 04:03 PM

A few pics of the two piece drive line. We used the factory G8 front drive line into a carrier bearing.

coreyjhen · 12-12-2016, 05:07 PM

Very nice. I'm kind of surprised at the amount of rust, though, given that you're in NM.

Camaroguy · 12-12-2016, 06:37 PM

Quote:

Originally Posted by coreyjhen

Very nice. I'm kind of surprised at the amount of rust, though, given that you're in NM.

The drip rail, dash, and floors were all really good on this one. I think these trucks get rust in the cab corners, rockers, and corner of the doors even if they were kept inside all their life.

Camaroguy · 12-15-2016, 03:38 PM

Body work continues.......I had forgotten how miserable of a job this is. I have a lot of respect for anyone that can do this for a living.

Korted · 12-20-2016, 05:17 PM

Awesome build! Tons of information in the photos too!

Camaroguy · 01-02-2017, 04:09 PM

Well, I've been out of town for the last couple of weeks so not much progress.

However, early in December I ordered an accessory drive kit from Holley to move the alternator, power steering, and ac compressor to the top of the motor to help with clearance issues on the frame. After more than a month, the parts are still back-ordered. Instead of waiting indefinitely, we went ahead and clearanced the frame a little to make room for the belt and trimmed the front of the Dirty Dingo Slider to clear the alternator. This way we will be able to keep the alternator and p/s down low and out of the way. Looks much better if you ask me.

mooseknuckles · 12-15-2016, 07:54 PM

Quote:

Originally Posted by GAc10boy

Love the US Mags. Glad you went with those!

x2!

**ezrider01** · 12-17-2016, 12:08 PM

Hey Camaroguy...coming right along...looking great! Making better progress than I am thats for sur. Hey I am just down 550 in Rio Rancho...reach out when ever you heading to ABQ or SF sometime to exchange stories on the builds.

Camaroguy · 12-17-2016, 12:29 PM

Quote:

Originally Posted by ezrider01

Hey Camaroguy...coming right along...looking great! Making better progress than I am thats for sur. Hey I am just down 550 in Rio Rancho...reach out when ever you heading to ABQ or SF sometime to exchange stories on the builds.

Will do, thank you sir. Keep up the good work.

57larry · 12-18-2016, 11:46 PM

this is going to be one great build. keeps the pics coming. thanks, Larry

coreyjhen · 12-19-2016, 11:51 AM

Nice! As for the effort involved, you have the right tools. Just think of how it is for those of us who don't!

Camaroguy · 12-19-2016, 03:16 PM

Quote:

Originally Posted by coreyjhen

Nice! As for the effort involved, you have the right tools. Just think of how it is for those of us who don't!

Valid point, I am also blessed with someone who knows what, when, and how.

12-08-2016, 04:02 PM	#1
Camaroguy Registered User Join Date: Dec 2013 Location: Farmington NM Posts: 655	'68 c10 build This build started on 09/26/2016 as a father and son project with the idea of selling it when complete. I decided to start a thread today so I'll be adding a bunch of pics in a row. I don't have a lot of information about the truck to begin with but we started with a 1968 cab. The frame VIN matched the cab and is a short bed. It is a leaf spring truck which isn't anything I have dealt with before on these. My dad owns his own hot rod shop (Wild West Street Rods) and they work on it it periodically throughout the day when waiting on stuff for other projects. Due to my work, I am only able to devote about three hours a day, four days a week to it. Attached Images

12-08-2016, 04:04 PM	#2
Camaroguy Registered User Join Date: Dec 2013 Location: Farmington NM Posts: 655	Re: '68 c10 build Here is the frame we started with. It was in really nice condition. We added a Brother's bolt in c-notch (welded) prior to sending it out for powder coating. Attached Images

12-08-2016, 04:06 PM	#3
Camaroguy Registered User Join Date: Dec 2013 Location: Farmington NM Posts: 655	Re: '68 c10 build This truck had rust in both rockers and cab corners. Attached Images

12-08-2016, 04:09 PM	#4
Camaroguy Registered User Join Date: Dec 2013 Location: Farmington NM Posts: 655	Re: '68 c10 build Rust repair continued on the other side. Attached Images

12-08-2016, 04:12 PM	#5
Camaroguy Registered User Join Date: Dec 2013 Location: Farmington NM Posts: 655	Re: '68 c10 build Rust repair continued on doors. Additionally, speaker holes were filled, and rust preventer put on the cab floors. The cab floors were actually pretty solid. We also added a high-hump transmission tunnel. Attached Images

12-08-2016, 04:14 PM	#6
Camaroguy Registered User Join Date: Dec 2013 Location: Farmington NM Posts: 655	Re: '68 c10 build Started smoothing the firewall and the beginning of bodywork. Attached Images

12-08-2016, 05:08 PM	#7
jricharc Registered User Join Date: Jun 2016 Location: Manassas, VA Posts: 112	Re: '68 c10 build Sick build, gonna be bad ass! __________________ 1986 C10 LWB 350 1970 C10 LWB 350 - Sold

12-08-2016, 08:23 PM	#9
Camaroguy Registered User Join Date: Dec 2013 Location: Farmington NM Posts: 655	Re: '68 c10 build Here are a couple of other pics I wanted to upload. It shows the test fitting of the door and filling of the gas tank filler. Also, the Boss 338's we originally wanted to go with. I'm a little disappointed we couldn't use them because I'm partial to them on these trucks; however, there sure are a lot of these truck out there with them on it. Attached Images

12-08-2016, 08:28 PM	#10
FRCvette Registered User Join Date: Mar 2007 Location: cincy Posts: 694	Re: '68 c10 build Sweet build man. I will b watching this so keep the pics coming. __________________ There's something women like about a pick-up man 1967 c10 swb Stepside 2004 SSR 2013 Silverado swb

12-09-2016, 09:23 AM	#12
forcd02 Registered User Join Date: Nov 2016 Location: woodbine, md Posts: 15	Re: '68 c10 build Great job, thanks for the pics-i am just starting my 70 build Did you use the stock frame brackets? mine has a 6 banger, have a 5.3 LS going in-the 6 banger used a single bolt motor mount, I have some DD engine adapters from another project, thought I could use them Keep the pics coming

12-09-2016, 04:19 PM	#13
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	Re: '68 c10 build Love the US Mags. Glad you went with those! __________________ - Robbie UNITED BY TRUCKS - classic truck video content YouTube: www.youtube.com/c/unitedbytrucks Instagram: @united_by_trucks Paw Paw '68 508 Dark Blue Custom C10 Teddy '68 GMC SWB 503 Light Green LS Build Mississippi Mud '75 Skyline Blue Patina SBC Build

12-12-2016, 04:03 PM	#14
Camaroguy Registered User Join Date: Dec 2013 Location: Farmington NM Posts: 655	Re: '68 c10 build A few pics of the two piece drive line. We used the factory G8 front drive line into a carrier bearing. Attached Images

12-12-2016, 05:07 PM	#15
coreyjhen Registered User Join Date: Nov 2016 Location: Albuquerque, NM Posts: 110	Re: '68 c10 build Very nice. I'm kind of surprised at the amount of rust, though, given that you're in NM.

12-15-2016, 03:38 PM	#17
Camaroguy Registered User Join Date: Dec 2013 Location: Farmington NM Posts: 655	Re: '68 c10 build Body work continues.......I had forgotten how miserable of a job this is. I have a lot of respect for anyone that can do this for a living. Attached Images

12-20-2016, 05:17 PM	#18
Korted Registered User Join Date: Oct 2016 Location: Seneca, KS Posts: 12	Re: '68 c10 build Awesome build! Tons of information in the photos too!



Register or Log In To remove these advertisements.

01-02-2017, 04:09 PM	#19
Camaroguy Registered User Join Date: Dec 2013 Location: Farmington NM Posts: 655	Re: '68 c10 build Well, I've been out of town for the last couple of weeks so not much progress. However, early in December I ordered an accessory drive kit from Holley to move the alternator, power steering, and ac compressor to the top of the motor to help with clearance issues on the frame. After more than a month, the parts are still back-ordered. Instead of waiting indefinitely, we went ahead and clearanced the frame a little to make room for the belt and trimmed the front of the Dirty Dingo Slider to clear the alternator. This way we will be able to keep the alternator and p/s down low and out of the way. Looks much better if you ask me. Attached Images

12-17-2016, 12:08 PM	#21
ezrider01 Junior Member Join Date: Dec 2016 Location: Rio Rancho, NM or Tucson, AZ Posts: 68	Re: '68 c10 build Hey Camaroguy...coming right along...looking great! Making better progress than I am thats for sur. Hey I am just down 550 in Rio Rancho...reach out when ever you heading to ABQ or SF sometime to exchange stories on the builds. __________________ My Classics: '72 Corvette Stingray '69 Chevy C10 (WIP)

12-18-2016, 11:46 PM	#23
57larry Registered User Join Date: Nov 2007 Location: Indianapolis Posts: 1,161	Re: '68 c10 build this is going to be one great build. keeps the pics coming. thanks, Larry

12-19-2016, 11:51 AM	#24
coreyjhen Registered User Join Date: Nov 2016 Location: Albuquerque, NM Posts: 110	Re: '68 c10 build Nice! As for the effort involved, you have the right tools. Just think of how it is for those of us who don't!

Register or Log In To remove these advertisements.