Should I Buy This $500 Parts Truck? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dingo_dan_22 · 02-12-2007, 07:02 PM

I have a 1971 chev half ton and am just gettin into some bodywork.

The truck I'm intrested in is a 67' lwb with a 71' front clip.

Parts I'm interersted in....
The fenders are brand new
The doors have no rust and are in working order
The tailgate is mint with no rust or dents
The interior is redone with a nice bezel
The bumper is dentless but the chrome is a little faded

There's no engine or trans and its all 67' running gear. Once I get the parts I need, I'm sure I could bolt up my old stuff and still have a truck I could sell.

Is this worth a $500 dollar investment? This guy is short for cash and was asking $800. He says $600 and he'll deliver it right to my door.

Aarons72s · 02-12-2007, 07:07 PM

Heck the tailgate and doors more than cover $500 so I say go for it. That is my opinion. And if you dont put it back together you could always part it out.

dave2953 · 02-12-2007, 07:07 PM

If the fenders and tailgate are as nice as you say, they alone would be worth nearly what he's asking for the truck. I think just about any 67-72 would be worth $500. You should definitely get it! Beat me to it

Imacarguytoo · 02-12-2007, 07:16 PM

I would jump all over it!!!!!!

timcos · 02-12-2007, 07:38 PM

Yes...but work them down for 400. Always gots to have a deal.

dingo_dan_22 · 02-12-2007, 07:39 PM

Definately give me a good start with the bodywork. I just aligned the front end and now I might be ripping it all back apart. I think I've convinced my dad to let me go ahead with the purchace. Still have a $430 dollar ticket I've been putting off... but johny law can just take the parts truck when I'm done. lol.

5 views and 5 replies. I already worked him down from $800 to $500

dingo_dan_22 · 02-12-2007, 07:49 PM

Looks like one front fender is $258 retail here in Canada. Guess that answers my question! Thanks Guys

GREASEMONKEY72 · 02-12-2007, 08:44 PM

id say gor for it to and get the parts you need from it and like you said put your old stuff back on and sell it for 800-900 and make a lil doe off of it aswell and then you got your ticket money..haha

dingo_dan_22 · 05-06-2007, 02:13 AM

Here it is! Finally organized picking it up. I got 3 really good doors (2 driver & 1 passanger) , a good tailgate, good box, new fenders (one has surface rust b/c it wasn't primed), cool old steering wheel, 3 hoods, brand new windsheild and front drop coils. Theres two holes in the bed wood and I figure someone had semi stacks back there. lol. I might be able to scrape together a truck out of this one but it won't have an engine.

GREASEMONKEY72 · 05-06-2007, 05:46 AM

looks solid atlest, good parts thats for sure

**Canadian694x4** · 05-06-2007, 07:04 AM

71MUTT · 05-06-2007, 07:29 AM

Great buy Dingo Dan. Great deals like this are hard to come buy. :thumbsup:

*alschevy* · 05-07-2007, 10:36 PM

1967 chevy truck is hard to find the truck looks good

1967 chevy one ton tow truck

**phase_one** · 05-07-2007, 11:24 PM

bye it!

brak · 05-07-2007, 11:38 PM

Quote:

Originally Posted by phase_one

bye it!

according to post #9 he brought it home.

your post was #14

02-12-2007, 07:07 PM	#2
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,670	Re: Should I Buy This $500 Parts Truck? Heck the tailgate and doors more than cover $500 so I say go for it. That is my opinion. And if you dont put it back together you could always part it out.

02-12-2007, 07:07 PM	#3
dave2953 Dave's not here, man Join Date: Jun 2004 Location: Winder, Georgia Posts: 2,000	Re: Should I Buy This $500 Parts Truck? If the fenders and tailgate are as nice as you say, they alone would be worth nearly what he's asking for the truck. I think just about any 67-72 would be worth $500. You should definitely get it! Beat me to it __________________ - 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250 Last edited by dave2953; 02-12-2007 at 07:09 PM.

02-12-2007, 07:16 PM	#4
Imacarguytoo Registered User Join Date: Nov 2006 Location: Illinois Posts: 306	Re: Should I Buy This $500 Parts Truck? I would jump all over it!!!!!! __________________ '67 C20 Lwb 350 4-Speed '01 Chrysler Concorde LXI (wifes ride) '91 Gmc Suburban 3/4 2wd 454 Tbi '51 Jeep Cj3a "Willys" 350 V8

02-12-2007, 07:38 PM	#5
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: Should I Buy This $500 Parts Truck? Yes...but work them down for 400. Always gots to have a deal. __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004)

02-12-2007, 07:39 PM	#6
dingo_dan_22 Registered User Join Date: Dec 2006 Location: Saskatchewan Posts: 119	Re: Should I Buy This $500 Parts Truck? Definately give me a good start with the bodywork. I just aligned the front end and now I might be ripping it all back apart. I think I've convinced my dad to let me go ahead with the purchace. Still have a $430 dollar ticket I've been putting off... but johny law can just take the parts truck when I'm done. lol. 5 views and 5 replies. I already worked him down from $800 to $500 __________________ 71' Chevrolet -> 350c.i. w/ 600 Edelbrock Carb, Headers, P/S, 3/5 Drop Last edited by dingo_dan_22; 02-12-2007 at 07:41 PM.

02-12-2007, 07:02 PM	#1
dingo_dan_22 Registered User Join Date: Dec 2006 Location: Saskatchewan Posts: 119	Should I Buy This $500 Parts Truck? I have a 1971 chev half ton and am just gettin into some bodywork. The truck I'm intrested in is a 67' lwb with a 71' front clip. Parts I'm interersted in.... The fenders are brand new The doors have no rust and are in working order The tailgate is mint with no rust or dents The interior is redone with a nice bezel The bumper is dentless but the chrome is a little faded There's no engine or trans and its all 67' running gear. Once I get the parts I need, I'm sure I could bolt up my old stuff and still have a truck I could sell. Is this worth a $500 dollar investment? This guy is short for cash and was asking $800. He says $600 and he'll deliver it right to my door. __________________ 71' Chevrolet -> 350c.i. w/ 600 Edelbrock Carb, Headers, P/S, 3/5 Drop Last edited by dingo_dan_22; 02-12-2007 at 07:03 PM.

02-12-2007, 07:49 PM	#7
dingo_dan_22 Registered User Join Date: Dec 2006 Location: Saskatchewan Posts: 119	Re: Should I Buy This $500 Parts Truck? Looks like one front fender is $258 retail here in Canada. Guess that answers my question! Thanks Guys __________________ 71' Chevrolet -> 350c.i. w/ 600 Edelbrock Carb, Headers, P/S, 3/5 Drop

02-12-2007, 08:44 PM	#8
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Should I Buy This $500 Parts Truck? id say gor for it to and get the parts you need from it and like you said put your old stuff back on and sell it for 800-900 and make a lil doe off of it aswell and then you got your ticket money..haha __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

05-06-2007, 02:13 AM	#9
dingo_dan_22 Registered User Join Date: Dec 2006 Location: Saskatchewan Posts: 119	Re: Should I Buy This $500 Parts Truck? Here it is! Finally organized picking it up. I got 3 really good doors (2 driver & 1 passanger) , a good tailgate, good box, new fenders (one has surface rust b/c it wasn't primed), cool old steering wheel, 3 hoods, brand new windsheild and front drop coils. Theres two holes in the bed wood and I figure someone had semi stacks back there. lol. I might be able to scrape together a truck out of this one but it won't have an engine. Attached Images __________________ 71' Chevrolet -> 350c.i. w/ 600 Edelbrock Carb, Headers, P/S, 3/5 Drop

05-06-2007, 05:46 AM	#10
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Should I Buy This $500 Parts Truck? looks solid atlest, good parts thats for sure __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

05-06-2007, 07:04 AM	#11
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	Re: Should I Buy This $500 Parts Truck? __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

05-06-2007, 07:29 AM	#12
71MUTT Can't ReMember Join Date: Dec 2006 Location: Orlando area Posts: 258	Re: Should I Buy This $500 Parts Truck? Great buy Dingo Dan. Great deals like this are hard to come buy. :thumbsup: __________________ Adversity doesn't test your character; it reveals it. 71 C-10 LWB 350/TH350. I purchased it in 1978 for $1400. I'm currently abusing it daily. (when it's running )

05-07-2007, 10:36 PM	#13
alschevy Account Suspended Join Date: Jun 2005 Location: Lehigh Acres FL Posts: 205	Re: Should I Buy This $500 Parts Truck? 1967 chevy truck is hard to find the truck looks good 1967 chevy one ton tow truck

05-07-2007, 11:24 PM	#14
phase_one Registered User Join Date: Jul 2001 Location: Praireville. LA 70769 Posts: 390	Re: Should I Buy This $500 Parts Truck? bye it! __________________ 11 Surbaban 70 C 10 still in progress



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.