1965 C-10 Front Fender Tips Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Old Blue 1965 · 08-23-2013, 02:30 PM

My 1965 C-10 has the typical rust on the back of the front fenders each side by the door. I was looking at Brother's Truck and was wondering if anyone has had these welded in and how do they look, before I buy them.
They are the ones that are about 12"
Thank you

1963c-10 · 08-23-2013, 03:13 PM

Any and all sheet metal i'd get from top banana
link:
http://www.topbananaparts.com/vaf/pr...l=234&trim=236

Old Blue 1965 · 08-23-2013, 03:19 PM

63c-10 Thanks, I take it you have used them before and they have good fit quality?

1963c-10 · 08-23-2013, 04:27 PM

Yes. I am satisfied with all the sheet metal I have purchased from them. Mar-K is also a great source for bed parts...tailgates, bed sides, forward bed panels, etc...

**Clyde65** · 08-23-2013, 04:37 PM

I will second this!

sickboy_1456 · 08-23-2013, 05:42 PM

I have a few solid fenders I'm going to be putting in the classifieds. A little filler, but solid with good mounting braces. Do you guys think $90/each is fair? All for $240?

jdl71 · 08-23-2013, 08:53 PM

I think that's probably a fair price for them. There's 3, correct? The problem those of us in the rust belt have is shipping. It costs as much or more to get them here than the fenders themselves.

sickboy_1456 · 08-23-2013, 09:31 PM

Yeah shipping can be expensive these days.
Posted via Mobile Device

ohmaback · 08-24-2013, 10:44 AM

Hi, i live in san diego . Have a 65 swbsw,and could really use the the beige, and yellow @ your stated price, would be willing to pick up, thanks ,keith

sickboy_1456 · 08-24-2013, 12:01 PM

Ohmaback -pm sent
Posted via Mobile Device

**joedoh** · 08-24-2013, 05:16 PM

I think 90 ea is a steal, I got 75ea out of a repaired set a couple years ago

08-23-2013, 02:30 PM	#1
Old Blue 1965 Registered User Join Date: Jan 2013 Location: San Diego CA Posts: 7	1965 C-10 Front Fender Tips Question My 1965 C-10 has the typical rust on the back of the front fenders each side by the door. I was looking at Brother's Truck and was wondering if anyone has had these welded in and how do they look, before I buy them. They are the ones that are about 12" Thank you

08-23-2013, 03:13 PM	#2
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1965 C-10 Front Fender Tips Question Any and all sheet metal i'd get from top banana link: http://www.topbananaparts.com/vaf/pr...l=234&trim=236 __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-23-2013, 03:19 PM	#3
Old Blue 1965 Registered User Join Date: Jan 2013 Location: San Diego CA Posts: 7	Re: 1965 C-10 Front Fender Tips Question 63c-10 Thanks, I take it you have used them before and they have good fit quality?

08-23-2013, 04:27 PM	#4
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1965 C-10 Front Fender Tips Question Yes. I am satisfied with all the sheet metal I have purchased from them. Mar-K is also a great source for bed parts...tailgates, bed sides, forward bed panels, etc... __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-23-2013, 04:37 PM	#5
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: 1965 C-10 Front Fender Tips Question I will second this! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

08-23-2013, 05:42 PM	#6
sickboy_1456 Registered User Join Date: Jun 2010 Location: Ventura, CA Posts: 173	Re: 1965 C-10 Front Fender Tips Question I have a few solid fenders I'm going to be putting in the classifieds. A little filler, but solid with good mounting braces. Do you guys think $90/each is fair? All for $240? Attached Images

08-23-2013, 08:53 PM	#7
jdl71 Registered User Join Date: Oct 2012 Location: Eldon, MO Posts: 1,753	Re: 1965 C-10 Front Fender Tips Question I think that's probably a fair price for them. There's 3, correct? The problem those of us in the rust belt have is shipping. It costs as much or more to get them here than the fenders themselves. __________________ Psalm 23 64 C10 66 K20

08-23-2013, 09:31 PM	#8
sickboy_1456 Registered User Join Date: Jun 2010 Location: Ventura, CA Posts: 173	Re: 1965 C-10 Front Fender Tips Question Yeah shipping can be expensive these days. Posted via Mobile Device

08-24-2013, 10:44 AM	#9
ohmaback Registered User Join Date: Aug 2012 Location: san diego ca Posts: 33	Re: 1965 C-10 Front Fender Tips Question Hi, i live in san diego . Have a 65 swbsw,and could really use the the beige, and yellow @ your stated price, would be willing to pick up, thanks ,keith

08-24-2013, 12:01 PM	#10
sickboy_1456 Registered User Join Date: Jun 2010 Location: Ventura, CA Posts: 173	Re: 1965 C-10 Front Fender Tips Question Ohmaback -pm sent Posted via Mobile Device

08-24-2013, 05:16 PM	#11
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,761	Re: 1965 C-10 Front Fender Tips Question I think 90 ea is a steal, I got 75ea out of a repaired set a couple years ago __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.