47-55.1 panel bed strips - The 1947 - Present Chevrolet & GMC Truck Message Board Network

48panel · 03-16-2024, 08:22 PM

Wanting to replace the bed strips for a half ton panel. Does anyone have a source? Just finding for the pickups.

**mr48chev** · 03-17-2024, 01:48 AM

I'm willing to bet that they are the same as pickup but may be a different length. I've never seen panel speciffic wood or strips.

**Hcb3200** · 03-17-2024, 09:55 AM

I would concur.
take some measurements.
You can get them without the holes and set them to match if they are off.

If you measure your holes from the tip we can validate they match the truck ones. Also they make strips that have hidden fasteners that are adjustable. that word work well.

get the long bed ones and cut to size.

i doubt even if they are different that any of the aftermarket guys will make them because of low demand compared to the trucks. Not as many panels out there.

48panel · 08-28-2024, 08:22 PM

Panel strips are 82" long for eight. Two at 36, two at 18.

Second Series · 08-29-2024, 04:06 PM

https://www.mar-k.com/partDetails.aspx?IID=110222
Mar-K has it.

03-16-2024, 08:22 PM	#1
48panel Registered User Join Date: Apr 2023 Location: COUNCIL BLUFFS, Ia Posts: 4	panel bed strips Wanting to replace the bed strips for a half ton panel. Does anyone have a source? Just finding for the pickups.

03-17-2024, 01:48 AM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,651	Re: panel bed strips I'm willing to bet that they are the same as pickup but may be a different length. I've never seen panel speciffic wood or strips. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-17-2024, 09:55 AM	#3
Hcb3200 Senior Member Join Date: Apr 2017 Location: Suwanee GA Posts: 269	Re: panel bed strips I would concur. take some measurements. You can get them without the holes and set them to match if they are off. If you measure your holes from the tip we can validate they match the truck ones. Also they make strips that have hidden fasteners that are adjustable. that word work well. get the long bed ones and cut to size. i doubt even if they are different that any of the aftermarket guys will make them because of low demand compared to the trucks. Not as many panels out there.

08-28-2024, 08:22 PM	#4
48panel Registered User Join Date: Apr 2023 Location: COUNCIL BLUFFS, Ia Posts: 4	Re: panel bed strips Panel strips are 82" long for eight. Two at 36, two at 18.

08-29-2024, 04:06 PM	#5
Second Series Registered User Join Date: May 2015 Location: Tukwila Washington Posts: 390	Re: panel bed strips https://www.mar-k.com/partDetails.aspx?IID=110222 Mar-K has it. __________________ '47 Panel to '88 K2500 Frame Swap Mechanical Speedometer Drive Solution 1947.2 1 ton Chevy Panel 1955.2 Chevy 6700 Bus/RV 1990 Chevy K1500



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.