Looking at a truck today... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chev74 · 11-06-2007, 10:53 AM

its a 72 GMC. for my friend. Just wondering what i should really keep an eye out for. ill be taking pictures and posting them. just want to take a small list of what to scan since he doesnt really know what to look for.

THanks in advance

PanelDeland · 11-06-2007, 11:09 AM

Take a small magnet(i use a magnetic business card),carry an old blanket or creeper(I use an old furniture pad),a pad and pencil is also handy.Depending on the condition a compression test and oil sample are good ideas.
Look under it for rusted body mounts and frame,check with a magnet for bondo in the cab corners and rockers.Check the roof by the drip rail.Look at the wiring for bad splices or an overabundance of them.Look at the lenses and guages and any other plastice parts for pitting cloudyness and overall useability.
Keep in mind that the truck may have mods that were done poorly even if the truck looks nice.The real test is to sum up the truck for what you're looking for and determine if the price is one you are willing to pay for the condition of the truck.
Hopefully someone will add some other good info to this.

Hoods69BadBowTie · 11-06-2007, 01:07 PM

^Pretty straight forward and some very good ideas. I was going to say make sure that u test drive it and try out all the gears and check out all the steering components and 4 wheel drive if it has it. The creeper or a blanket is a great idea so u can lay underneath it and check everything out the best u can. Defiantly check the cab corners and rockers for rust and or bondo. Good luck.

chev74 · 11-06-2007, 08:35 PM

well here they are!

tell me what ya think...

Cyclone44 · 11-06-2007, 08:42 PM

The pictures you have look good. How is the bed is it in good shape? George

chev74 · 11-06-2007, 08:42 PM

More...

ChevLoRay · 11-06-2007, 08:48 PM

Doesn't look too bad. Some places to check for rust are the floor pans, the kick panels, rockers, cab corners, underneath the battery tray and on the radiator core support. The bottom of the doors, if the drain holes are blocked by debris, will eventually rust the outside of the doors about 3 inches from the bottom edge of the door. Basically, it wil take a careful eye and objectivity free from emotions to assess the overall condition.

tcb-1 · 11-06-2007, 08:50 PM

that's a nice clean little rig!! check the cab corners, rear cab braces, and the area under the battery. but from what I can see, that is a really solid looking GMC. doesn't look modified too much either. of course, we would all like to know how much your friend paid.

chev74 · 11-06-2007, 08:51 PM

more...

chev74 · 11-06-2007, 08:55 PM

didnt buy it yet. the guy wants $3000- good deal?

the cancer in front of the passenger tire is from a battery leak that was there. pretty eaten away.

the bed has a rubber mat in it, but i lifted it up and it still looks really solid. has the sratch surface rust that will be present in a former farm truck like this.

The speedo need work, needs a new fuel sending unit, new dash pad, new seat. interior looked clean otherwise.

the first pic was a magnet on the body to check for bondo...

what carb is this (it didnt say quardrajet on it) and i have a set of numbers on the axle that ill post in a sec. and the heads have a casting that ill draw a pic of in a little while

chev74 · 11-06-2007, 08:56 PM

no power steering, no power brakes.

my buddy wants to know what it will take to convery this also...

chev74 · 11-06-2007, 08:56 PM

also what tranny is this. Ill be back in a few minutes- im gonna go eat

tcb-1 · 11-06-2007, 09:07 PM

tranny looks like a TH350, but the automatic guys will probably know for sure. looks clean under there too.

as far as the battery acid issue, looks like a new fender liner will be in order. no biggie.

the carb looks like a old Carter 4 barrel.

I'd like the 72 guys to chime in here. is the blue and white interior correct? mainly, the glove box door?? didn't know GM did that?

chev74 · 11-06-2007, 09:42 PM

72 guys? a little feedback will be nice please? lol

*ksjh1316* · 11-06-2007, 10:21 PM

Looks like a TH350 min my opinion as well curious that the dustcover is missing and it is that clean. The blue and white is a combo GMC used I looked at a 70 GMC for a parts truck that was set up the same way. Looks solid.

chev74 · 11-06-2007, 10:47 PM

what about the price guys? good deal or no?

cruiserman · 11-07-2007, 12:02 AM

3K seems steep to me, but I don't live in Tyler, TX. Power steering and brake conversions are easy.

chev74 · 11-07-2007, 12:31 AM

the number for the intake was 5268751 (what does this mean?)

the rear axle had 678.0 cast on it

and the passenger side head has the left cast on it, the drivers side on the right

**68350** · 11-07-2007, 03:02 AM

i would think that's way too much for that truck, imo. also looks like someone mounted engine emblems, which a gmc never had. way too much imo, though. hope this helps

brak · 11-07-2007, 03:21 AM

I'm confused about something...
I thought power brakes were standard by 72, due to the front discs

**68350** · 11-07-2007, 03:49 AM

that's true...??? hmmm, maybe it's a conglomeration of parts??? who knows, i would definitely research that truck more before dropping that kind of money on it.

red71cheyenne · 11-07-2007, 04:22 AM

I'm sorry. I wouldn't spend over $500 on that. And they are right, something is fishy about the year. Might check the VIN to see what year it says it is. Title might show it as well. That would be something I would look at as well to see if they match. Sorry.

1bad chevy · 11-07-2007, 05:58 AM

imo that truck just from looking at the pic's is in really good shape as far as value everyone has there spending limit's to start with it has a decent looking grill a new one just the center is $500 to do that grill complete it would cost around a $1,000 to buy new. the cab,door's,rocker's,fender's and box didn't seem to have alot of rust didn't see any hole's other than the inner fender. the frame looked really good to now if it run's and drive's with no major issue's and these thing's sell for $10,000 and more when finished up imo it would be a truck that i would buy just ask what would it be worth in part's i think it would be worth around the asking price i would try to get it cheaper if i could but i feel that it is worth it IMO

chev74 · 11-07-2007, 10:38 AM

Quote:

Originally Posted by 68350

i would think that's way too much for that truck, imo. also looks like someone mounted engine emblems, which a gmc never had. way too much imo, though. hope this helps

what do you mean someone mounted engine badges? those microsoft paint pics are shapes that are cast onto the head

the owner said its not the original motor, its a rebuild with 20,000 miles.

72Levi · 11-07-2007, 10:45 AM

For $3k I would pass. In Texas you can find just as nice trucks with more options such as A/C, PB and even a short bed if you want it. IMHO that truck is only worth $1k-$2k ONLY.

11-06-2007, 10:53 AM	#1
chev74 Addicted to Chevy Join Date: Dec 2004 Location: Tyler, Tx Posts: 857	Looking at a truck today... PICS NOW its a 72 GMC. for my friend. Just wondering what i should really keep an eye out for. ill be taking pictures and posting them. just want to take a small list of what to scan since he doesnt really know what to look for. THanks in advance Last edited by chev74; 11-06-2007 at 10:19 PM.

11-06-2007, 11:09 AM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Looking at a truck today... Take a small magnet(i use a magnetic business card),carry an old blanket or creeper(I use an old furniture pad),a pad and pencil is also handy.Depending on the condition a compression test and oil sample are good ideas. Look under it for rusted body mounts and frame,check with a magnet for bondo in the cab corners and rockers.Check the roof by the drip rail.Look at the wiring for bad splices or an overabundance of them.Look at the lenses and guages and any other plastice parts for pitting cloudyness and overall useability. Keep in mind that the truck may have mods that were done poorly even if the truck looks nice.The real test is to sum up the truck for what you're looking for and determine if the price is one you are willing to pay for the condition of the truck. Hopefully someone will add some other good info to this. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" Last edited by PanelDeland; 11-06-2007 at 11:10 AM.

11-06-2007, 01:07 PM	#3
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: Looking at a truck today... ^Pretty straight forward and some very good ideas. I was going to say make sure that u test drive it and try out all the gears and check out all the steering components and 4 wheel drive if it has it. The creeper or a blanket is a great idea so u can lay underneath it and check everything out the best u can. Defiantly check the cab corners and rockers for rust and or bondo. Good luck. __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!! Last edited by Hoods69BadBowTie; 11-06-2007 at 01:08 PM.

11-06-2007, 08:35 PM	#4
chev74 Addicted to Chevy Join Date: Dec 2004 Location: Tyler, Tx Posts: 857	Re: Looking at a truck today... well here they are! tell me what ya think... Attached Images

11-06-2007, 08:42 PM	#5
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Looking at a truck today... The pictures you have look good. How is the bed is it in good shape? George

11-06-2007, 08:42 PM	#6
chev74 Addicted to Chevy Join Date: Dec 2004 Location: Tyler, Tx Posts: 857	Re: Looking at a truck today... More... Attached Images

11-06-2007, 08:48 PM	#7
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Looking at a truck today... Doesn't look too bad. Some places to check for rust are the floor pans, the kick panels, rockers, cab corners, underneath the battery tray and on the radiator core support. The bottom of the doors, if the drain holes are blocked by debris, will eventually rust the outside of the doors about 3 inches from the bottom edge of the door. Basically, it wil take a careful eye and objectivity free from emotions to assess the overall condition. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

11-06-2007, 08:50 PM	#8
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Looking at a truck today... that's a nice clean little rig!! check the cab corners, rear cab braces, and the area under the battery. but from what I can see, that is a really solid looking GMC. doesn't look modified too much either. of course, we would all like to know how much your friend paid.

11-06-2007, 08:51 PM	#9
chev74 Addicted to Chevy Join Date: Dec 2004 Location: Tyler, Tx Posts: 857	Re: Looking at a truck today... more... Attached Images

11-06-2007, 08:55 PM	#10
chev74 Addicted to Chevy Join Date: Dec 2004 Location: Tyler, Tx Posts: 857	Re: Looking at a truck today... didnt buy it yet. the guy wants $3000- good deal? the cancer in front of the passenger tire is from a battery leak that was there. pretty eaten away. the bed has a rubber mat in it, but i lifted it up and it still looks really solid. has the sratch surface rust that will be present in a former farm truck like this. The speedo need work, needs a new fuel sending unit, new dash pad, new seat. interior looked clean otherwise. the first pic was a magnet on the body to check for bondo... what carb is this (it didnt say quardrajet on it) and i have a set of numbers on the axle that ill post in a sec. and the heads have a casting that ill draw a pic of in a little while

11-06-2007, 08:56 PM	#11
chev74 Addicted to Chevy Join Date: Dec 2004 Location: Tyler, Tx Posts: 857	Re: Looking at a truck today... no power steering, no power brakes. my buddy wants to know what it will take to convery this also...

11-06-2007, 08:56 PM	#12
chev74 Addicted to Chevy Join Date: Dec 2004 Location: Tyler, Tx Posts: 857	Re: Looking at a truck today... also what tranny is this. Ill be back in a few minutes- im gonna go eat

11-06-2007, 09:07 PM	#13
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Looking at a truck today... tranny looks like a TH350, but the automatic guys will probably know for sure. looks clean under there too. as far as the battery acid issue, looks like a new fender liner will be in order. no biggie. the carb looks like a old Carter 4 barrel. I'd like the 72 guys to chime in here. is the blue and white interior correct? mainly, the glove box door?? didn't know GM did that?

11-06-2007, 09:42 PM	#14
chev74 Addicted to Chevy Join Date: Dec 2004 Location: Tyler, Tx Posts: 857	Re: Looking at a truck today... 72 guys? a little feedback will be nice please? lol

11-06-2007, 10:21 PM	#15
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Looking at a truck today... Looks like a TH350 min my opinion as well curious that the dustcover is missing and it is that clean. The blue and white is a combo GMC used I looked at a 70 GMC for a parts truck that was set up the same way. Looks solid.



Register or Log In To remove these advertisements.

11-06-2007, 10:47 PM	#16
chev74 Addicted to Chevy Join Date: Dec 2004 Location: Tyler, Tx Posts: 857	Re: Looking at a truck today... what about the price guys? good deal or no?

11-07-2007, 12:02 AM	#17
cruiserman Registered User Join Date: Dec 2006 Location: Idaho Posts: 210	Re: Looking at a truck today... 3K seems steep to me, but I don't live in Tyler, TX. Power steering and brake conversions are easy. __________________ 72 C2500 LWB 402 Sierra Grande 05 Odyssey 08 Tundra

11-07-2007, 12:31 AM	#18
chev74 Addicted to Chevy Join Date: Dec 2004 Location: Tyler, Tx Posts: 857	Re: Looking at a truck today... the number for the intake was 5268751 (what does this mean?) the rear axle had 678.0 cast on it and the passenger side head has the left cast on it, the drivers side on the right Attached Images

11-07-2007, 03:02 AM	#19
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Looking at a truck today... i would think that's way too much for that truck, imo. also looks like someone mounted engine emblems, which a gmc never had. way too much imo, though. hope this helps __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

11-07-2007, 03:21 AM	#20
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: Looking at a truck today... I'm confused about something... I thought power brakes were standard by 72, due to the front discs __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

11-07-2007, 03:49 AM	#21
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Looking at a truck today... that's true...??? hmmm, maybe it's a conglomeration of parts??? who knows, i would definitely research that truck more before dropping that kind of money on it. __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

11-07-2007, 04:22 AM	#22
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Looking at a truck today... I'm sorry. I wouldn't spend over $500 on that. And they are right, something is fishy about the year. Might check the VIN to see what year it says it is. Title might show it as well. That would be something I would look at as well to see if they match. Sorry. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

11-07-2007, 05:58 AM	#23
1bad chevy Registered User Join Date: Dec 2006 Location: POWNAL VERMONT Posts: 343	Re: Looking at a truck today... imo that truck just from looking at the pic's is in really good shape as far as value everyone has there spending limit's to start with it has a decent looking grill a new one just the center is $500 to do that grill complete it would cost around a $1,000 to buy new. the cab,door's,rocker's,fender's and box didn't seem to have alot of rust didn't see any hole's other than the inner fender. the frame looked really good to now if it run's and drive's with no major issue's and these thing's sell for $10,000 and more when finished up imo it would be a truck that i would buy just ask what would it be worth in part's i think it would be worth around the asking price i would try to get it cheaper if i could but i feel that it is worth it IMO __________________ 1972 c-20 chevy 500 caddy/4.10posi / 1972 3/4 ton gmc 350 4x4/4.10posi front&rear Last edited by 1bad chevy; 11-07-2007 at 06:00 AM.

11-07-2007, 10:45 AM	#25
72Levi Active Member Join Date: Feb 2006 Location: sa tx Posts: 851	Re: Looking at a truck today... For $3k I would pass. In Texas you can find just as nice trucks with more options such as A/C, PB and even a short bed if you want it. IMHO that truck is only worth $1k-$2k ONLY. __________________ 1972 K5 Blazer ALL ORIGINAL paint & engine, A/C, Tilt, 4sp, AM/FM, Tow Hooks, Aux Battery Tray, Tach, Vacuum 2004 FORD FX4 SuperCrew 2005 CTS-V 12 sec family car 2008 Buick Enclave AWD, Nav, & DVD, Wife LOVES it!

Register or Log In To remove these advertisements.