VA Price Reduced!!! Speedwarning Tach Vacuum Dash!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 03-26-2011, 12:57 AM

Here it is guys! The grandaddy of all dashes

A tach/vac dash with speedwarning!!!!

Shown with its' original bezel. I have a really nice black and chrome reproduction bezel, an all chrome, a woodgrain, and a restored cheyenne super woodgrain as options to install with this if you want (for additional cost)

AN NOS adjuster knob and the nut are both installed.

I have 60 and 80lb oil pressure gauges. 60lb included 80lb 35 extra.

The speedwarning needle moves from 25-100. The wire inside is intact. The brass grounding piece was in this tin. I now have the wiring harness or buzzer. Available for an additional $75 (what I paid for it).

Lettering is very nice on all gauges. There is a slight faded area on the speedometer but no rust or discoloration. Lens is a nice original that I polished. has a few scratches in it but overall a nice original lens. I do have a reproduction lens I will swap in at no charge if you prefer that.

As shown (including the mentioned NOS knob and adjuster) Asking 700 picked up or 740 shipped in the CONUS with lots of packaging and insurance

Buyer to pay via postal money order or if you choose paypal you will need to pay the fees on this one

First to say they will take it has dibs. We can then work out if you want this bezel or one of the others.

VA72C10 · 03-26-2011, 12:59 AM

I just noticed the nuts/washers are off the printed circuit in the pictures. Those are on now

VA72C10 · 03-26-2011, 01:20 AM

To give you an idea how this will look with a black and chrome bezel...my other tac/vac

VA72C10 · 03-26-2011, 10:18 AM

I'm going to throw this on ebay also but if someone on here wants it (before the final few hours of the auction) I will remove it from the auction (unless someone hits Buy it now-price will be higher to cover the fees.

)

VA72C10 · 03-26-2011, 03:41 PM

A bunch of views but not even a comment, huh

tr69c10 · 03-26-2011, 05:16 PM

man thats nice bump for ya

oldblue1968chevy · 03-26-2011, 05:41 PM

Hey jonathon, what/where are you buying your paint to paint the tin with? Mines really rusty, im about to tear it down and start to redo it, also, whats the closest color to OEM for the needes? You can PM me if you wanna.

Looks great as usual!!!! That sucker is a loaded dash..wanna buy mine

?

70LonghornCST · 03-26-2011, 06:19 PM

Man! That's one gorgeous rare speed warning/tach/vac cluster. One would be hard pressed to find one nicer. I know the future owner will be VERY happy hanging that on their rig!

VA72C10 · 03-26-2011, 06:28 PM

Quote:

Originally Posted by oldblue1968chevy

Hey jonathon, what/where are you buying your paint to paint the tin with? Mines really rusty, im about to tear it down and start to redo it, also, whats the closest color to OEM for the needes? You can PM me if you wanna.

Looks great as usual!!!! That sucker is a loaded dash..wanna buy mine

?

Thanks, PM sent

Quote:

Originally Posted by 70LonghornCST

Man! That's one gorgeous rare speed warning/tach/vac cluster. One would be hard pressed to find one nicer. I know the future owner will be VERY happy hanging that on their rig!

Thanks! That means A LOT coming from you!!!

VA72C10 · 03-27-2011, 10:17 AM

back ttt.

Going on ebay this afternoon

VA72C10 · 03-27-2011, 11:46 PM

not on ebay yet....

I can bring this to Charlotte or GOG in the next few weeks. Will do 750 hand delivered

Or will lower shipped price to 775!

VA72C10 · 03-28-2011, 08:28 PM

Now on ebay...950 Buy it now....reserve higher than my asking price here (to cover the fees)

VA72C10 · 03-28-2011, 11:28 PM

Will bring to Charlotte auto fair to sell but if one of the members here pays in advance I'll sell it to them for 700 delivered to the auction and end the ebay auction. That's as low as I'll go on it.

I will also do 740 shipped.

VA72C10 · 03-31-2011, 01:00 AM

Put the NOS speedwarning nut and adjuster knob on today. And took a pic of the back with all the nuts/washers on.....

Already at 540.72 including shipping with 4days/18hrs to go on ebay... http://cgi.ebay.com/ebaymotors/ws/eB...STRK:MESELX:IT.....

rsavage · 03-31-2011, 01:01 PM

Jonathan,
I received the tach/vac dash today. It is a work of art. I can't wait to put it in the Blazer but that will be a few months yet. Instead of p-ming you, I wanted to reply to this thread so it would get a bump. Superb work. I don't think anyone could go wrong buying a restored dash from you. Thanks, Rick

VA72C10 · 04-01-2011, 11:43 PM

Quote:

Originally Posted by rsavage

Jonathan,
I received the tach/vac dash today. It is a work of art. I can't wait to put it in the Blazer but that will be a few months yet. Instead of p-ming you, I wanted to reply to this thread so it would get a bump. Superb work. I don't think anyone could go wrong buying a restored dash from you. Thanks, Rick

Thanks for the kind words. I try my best to make them how I would like them!

VA72C10 · 04-04-2011, 10:25 PM

Going to be taking this to Charlotte Friday....

Juarez823 · 04-05-2011, 02:18 AM

This is not exaclty about your dash, but do you happend to have the choke delete for a 67-68?

VA72C10 · 05-03-2011, 01:58 AM

Quote:

Originally Posted by Juarez823

This is not exaclty about your dash, but do you happend to have the choke delete for a 67-68?

sorry I somehow overlooked this question...I don't have a choke delete...sorry...

This dash is back up for sale. Thought I had it sold locally but guy couldn't come up with the cash.

Asking 700 picked up or 740 shipped. Add 45 if you want a new black bezel installed.

Also I now have an aftermarket wire and buzzer for the speedwarning. Cost me $75 and will pass it on for the same price.

Here's the NOS speedwarning nut and knob installed....

Juarez823 · 05-03-2011, 02:26 AM

Just to let you know that is one killer dash, which I maybe interested about but I have never heard or seen the extra needle on the speedo

VA72C10 · 05-03-2011, 02:29 AM

Quote:

Originally Posted by Juarez823

Just to let you know that is one killer dash, which I maybe interested about but I have never heard or seen the extra needle on the speedo

Thanks, the extra needle is the speedwarning part. You set it to a speed, and when you reach that speed, the buzzer sounds. Basically it's a way to make sure you don't speed

They are very rare in our trucks and Even more rare with the tach. And this one has the vacuum gauge as well.

Juarez823 · 05-03-2011, 02:38 AM

That knob almost looks like a bass knob! lol So that knob is original?

Zoomin · 05-03-2011, 08:56 AM

That sure is a nice setup Jonathan. What is your Super project going to have in it?
Posted via Mobile Device

VA72C10 · 05-03-2011, 11:05 AM

Quote:

Originally Posted by Juarez823

That knob almost looks like a bass knob! lol So that knob is original?

It is a GM new old stock....basically a new original....the original was cracked so I replaced it.

Quote:

Originally Posted by Zoomin

That sure is a nice setup Jonathan. What is your Super project going to have in it?
Posted via Mobile Device

Thanks. It'll have a tach with an 80lb oil pressure. Contemplating doing a tach/vac.....

Joe Custom C10 · 05-03-2011, 06:10 PM

What is the vacuum guage for?

Thanks Joe

03-26-2011, 12:57 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Price Reduced!!! Speedwarning Tach Vacuum Dash!!!! Here it is guys! The grandaddy of all dashes A tach/vac dash with speedwarning!!!! Shown with its' original bezel. I have a really nice black and chrome reproduction bezel, an all chrome, a woodgrain, and a restored cheyenne super woodgrain as options to install with this if you want (for additional cost) AN NOS adjuster knob and the nut are both installed. I have 60 and 80lb oil pressure gauges. 60lb included 80lb 35 extra. The speedwarning needle moves from 25-100. The wire inside is intact. The brass grounding piece was in this tin. I now have the wiring harness or buzzer. Available for an additional $75 (what I paid for it). Lettering is very nice on all gauges. There is a slight faded area on the speedometer but no rust or discoloration. Lens is a nice original that I polished. has a few scratches in it but overall a nice original lens. I do have a reproduction lens I will swap in at no charge if you prefer that. As shown (including the mentioned NOS knob and adjuster) Asking 700 picked up or 740 shipped in the CONUS with lots of packaging and insurance Buyer to pay via postal money order or if you choose paypal you will need to pay the fees on this one First to say they will take it has dibs. We can then work out if you want this bezel or one of the others. __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 05-03-2011 at 02:00 AM.

03-26-2011, 12:59 AM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Speedwarning Tach Vacuum Dash!!!! I just noticed the nuts/washers are off the printed circuit in the pictures. Those are on now __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-26-2011, 01:20 AM	#3
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Speedwarning Tach Vacuum Dash!!!! To give you an idea how this will look with a black and chrome bezel...my other tac/vac __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 03-26-2011 at 01:20 AM.

03-26-2011, 10:18 AM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Speedwarning Tach Vacuum Dash!!!! I'm going to throw this on ebay also but if someone on here wants it (before the final few hours of the auction) I will remove it from the auction (unless someone hits Buy it now-price will be higher to cover the fees. ) __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-26-2011, 03:41 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Speedwarning Tach Vacuum Dash!!!! A bunch of views but not even a comment, huh __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-26-2011, 05:16 PM	#6
tr69c10 Registered User Join Date: Feb 2008 Location: bellflower ca Posts: 370	Re: Speedwarning Tach Vacuum Dash!!!! man thats nice bump for ya

03-26-2011, 05:41 PM	#7
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Speedwarning Tach Vacuum Dash!!!! Hey jonathon, what/where are you buying your paint to paint the tin with? Mines really rusty, im about to tear it down and start to redo it, also, whats the closest color to OEM for the needes? You can PM me if you wanna. Looks great as usual!!!! That sucker is a loaded dash..wanna buy mine ? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

03-26-2011, 06:19 PM	#8
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Speedwarning Tach Vacuum Dash!!!! Man! That's one gorgeous rare speed warning/tach/vac cluster. One would be hard pressed to find one nicer. I know the future owner will be VERY happy hanging that on their rig! __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

03-27-2011, 10:17 AM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Speedwarning Tach Vacuum Dash!!!! back ttt. Going on ebay this afternoon __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-27-2011, 11:46 PM	#11
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Speedwarning Tach Vacuum Dash!!!! not on ebay yet.... I can bring this to Charlotte or GOG in the next few weeks. Will do 750 hand delivered Or will lower shipped price to 775! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-28-2011, 08:28 PM	#12
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Price Reduced!!! Speedwarning Tach Vacuum Dash!!!! Now on ebay...950 Buy it now....reserve higher than my asking price here (to cover the fees) __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-28-2011, 11:28 PM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Price Reduced!!! Speedwarning Tach Vacuum Dash!!!! Will bring to Charlotte auto fair to sell but if one of the members here pays in advance I'll sell it to them for 700 delivered to the auction and end the ebay auction. That's as low as I'll go on it. I will also do 740 shipped. __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-31-2011, 01:00 AM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Price Reduced!!! Speedwarning Tach Vacuum Dash!!!! Put the NOS speedwarning nut and adjuster knob on today. And took a pic of the back with all the nuts/washers on..... Already at 540.72 including shipping with 4days/18hrs to go on ebay... http://cgi.ebay.com/ebaymotors/ws/eB...STRK:MESELX:IT..... __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-31-2011, 01:01 PM	#15
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Price Reduced!!! Speedwarning Tach Vacuum Dash!!!! Jonathan, I received the tach/vac dash today. It is a work of art. I can't wait to put it in the Blazer but that will be a few months yet. Instead of p-ming you, I wanted to reply to this thread so it would get a bump. Superb work. I don't think anyone could go wrong buying a restored dash from you. Thanks, Rick __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

04-04-2011, 10:25 PM	#17
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Price Reduced!!! Speedwarning Tach Vacuum Dash!!!! Going to be taking this to Charlotte Friday.... __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

04-05-2011, 02:18 AM	#18
Juarez823 Registered User Join Date: Mar 2011 Location: Corvallis, Or Posts: 78	Re: Price Reduced!!! Speedwarning Tach Vacuum Dash!!!! This is not exaclty about your dash, but do you happend to have the choke delete for a 67-68?

05-03-2011, 02:26 AM	#20
Juarez823 Registered User Join Date: Mar 2011 Location: Corvallis, Or Posts: 78	Re: Price Reduced!!! Speedwarning Tach Vacuum Dash!!!! Just to let you know that is one killer dash, which I maybe interested about but I have never heard or seen the extra needle on the speedo

05-03-2011, 02:38 AM	#22
Juarez823 Registered User Join Date: Mar 2011 Location: Corvallis, Or Posts: 78	Re: Price Reduced!!! Speedwarning Tach Vacuum Dash!!!! That knob almost looks like a bass knob! lol So that knob is original?

05-03-2011, 08:56 AM	#23
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Price Reduced!!! Speedwarning Tach Vacuum Dash!!!! That sure is a nice setup Jonathan. What is your Super project going to have in it? Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

05-03-2011, 06:10 PM	#25
Joe Custom C10 Registered User Join Date: Mar 2009 Location: Austin Kentucky Posts: 45	Re: Price Reduced!!! Speedwarning Tach Vacuum Dash!!!! What is the vacuum guage for? Thanks Joe

Register or Log In To remove these advertisements.