1972 suburban bare frame weight - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Reno · 05-11-2023, 05:44 PM

I’m looking into having my bare frame dipped / galvanized.

I have had the Rob Bonney full box frame kit installed and need to know approximate weight as the vendor is charging me one dollar per pound to galvanize/dip the bare frame.

Thank you in advance

Reno · 05-11-2023, 05:46 PM

BTW it’s a 4x4 frame with all items that were bolted on removed.

RustyPile · 05-11-2023, 09:58 PM

Load the frame on a trailer. Take the tow vehicle, trailer, and frame to public scales, scrap dealer, truck stop, etc.. Weigh everything. Pull off the scales and unload the frame.. Re-weigh the tow vehicle and empty trailer.. Subtract this weight from the first weight, that's the weight of the frame.. Detective McClaine used this same deductive reasoning when computing how to wind up with 3 gallons of water in a 5 gallon jug..

If the plating facility charges by weight, why can't they weigh the frame????

**Dieselwrencher** · 05-12-2023, 10:52 AM

I'm not sure either but I would do as RustyPile said. Here's a guess below.

http://67-72chevytrucks.com/vboard/s...d.php?t=253443

Reno · 08-23-2023, 03:12 PM

Just trying to figure my expenses before I get the bill…..

05-11-2023, 05:44 PM	#1
Reno Registered User Join Date: Jan 2014 Location: Fort Collins CO Posts: 124	1972 suburban bare frame weight I’m looking into having my bare frame dipped / galvanized. I have had the Rob Bonney full box frame kit installed and need to know approximate weight as the vendor is charging me one dollar per pound to galvanize/dip the bare frame. Thank you in advance __________________ Restomod 1970 2WD Blazer LT4 Custom 1968 Suburban Cummins

05-11-2023, 05:46 PM	#2
Reno Registered User Join Date: Jan 2014 Location: Fort Collins CO Posts: 124	Re: 1972 suburban bare frame weight BTW it’s a 4x4 frame with all items that were bolted on removed. __________________ Restomod 1970 2WD Blazer LT4 Custom 1968 Suburban Cummins

05-11-2023, 09:58 PM	#3
RustyPile Registered User Join Date: Dec 2017 Location: Elkhart, Texas Posts: 1,815	Re: 1972 suburban bare frame weight Load the frame on a trailer. Take the tow vehicle, trailer, and frame to public scales, scrap dealer, truck stop, etc.. Weigh everything. Pull off the scales and unload the frame.. Re-weigh the tow vehicle and empty trailer.. Subtract this weight from the first weight, that's the weight of the frame.. Detective McClaine used this same deductive reasoning when computing how to wind up with 3 gallons of water in a 5 gallon jug.. If the plating facility charges by weight, why can't they weigh the frame????

05-12-2023, 10:52 AM	#4
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 1972 suburban bare frame weight I'm not sure either but I would do as RustyPile said. Here's a guess below. http://67-72chevytrucks.com/vboard/s...d.php?t=253443 __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-23-2023, 03:12 PM	#5
Reno Registered User Join Date: Jan 2014 Location: Fort Collins CO Posts: 124	Re: 1972 suburban bare frame weight Just trying to figure my expenses before I get the bill….. __________________ Restomod 1970 2WD Blazer LT4 Custom 1968 Suburban Cummins



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.