Disc and Drop Spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blazntn · 01-16-2008, 08:24 AM

Ok guys I have installed a C4 rearend in my 69 C-10. My question is about the front. I want to run the 5x4.75 bolt pattern. Currently I have six lug disc in the front with drop spindles. Just curious if there is a 5 lug rotor that will be a direct fit on my spindles. Then I can have the new bolt pattern drilled out.

thanks
Brad W
www.gaugemagazine.com

blazntn · 01-17-2008, 08:47 AM

BUMP!

Does anyone have any suggestions???

SCOTI · 01-17-2008, 11:06 AM

6-lug disc kits are typically based on one of two options: 71-87 disc spindles/rotors or 88-98 lt. duty (3/4 ton) spindles/rotors.

We would need to know which kit you have to be of any help. Meanwhile..... 'reverse' search any of your P/N's you know & see what they vehicle originated from.

blazntn · 01-17-2008, 10:15 PM

well the previous owner installed everything. I am not sure who made them. Didnt even see any markings. Is there any other way to tell?

01-16-2008, 08:24 AM	#1
blazntn Registered User Join Date: Dec 2005 Location: TN Posts: 204	Disc and Drop Spindles Ok guys I have installed a C4 rearend in my 69 C-10. My question is about the front. I want to run the 5x4.75 bolt pattern. Currently I have six lug disc in the front with drop spindles. Just curious if there is a 5 lug rotor that will be a direct fit on my spindles. Then I can have the new bolt pattern drilled out. thanks Brad W www.gaugemagazine.com

01-17-2008, 08:47 AM	#2
blazntn Registered User Join Date: Dec 2005 Location: TN Posts: 204	Re: Disc and Drop Spindles BUMP! Does anyone have any suggestions???

01-17-2008, 11:06 AM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,949	Re: Disc and Drop Spindles 6-lug disc kits are typically based on one of two options: 71-87 disc spindles/rotors or 88-98 lt. duty (3/4 ton) spindles/rotors. We would need to know which kit you have to be of any help. Meanwhile..... 'reverse' search any of your P/N's you know & see what they vehicle originated from. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 01-17-2008 at 11:07 AM.

01-17-2008, 10:15 PM	#4
blazntn Registered User Join Date: Dec 2005 Location: TN Posts: 204	Re: Disc and Drop Spindles well the previous owner installed everything. I am not sure who made them. Didnt even see any markings. Is there any other way to tell?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.