Blazer Bedsides!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Huck · 07-11-2004, 04:11 PM

The board meet / Super Chevy Show at Indi was wet, hot and not terribly busy business wise when it came to selling. But, I did manage to find something kind of interesting---Blazer wise.
How about a pair of Blazer bedside outer skins, door jam to rear tailight. One is a NOS never installed while the other appears to have been separated from it's inner at some point. I may not have ever been installed either!! Both sides have some very minor dings from handling and some typical very light surface rust (rubs off with your hand!) from sitting a while. I asked a buddy of mine who used to work in a body shop in the 70's and he said you could order an outer skin rather then a complete bedside! I'll take a few pictures after I pull them from the trailer~~~

LUV2XCLR8 · 07-11-2004, 04:34 PM

HEY HUCK, I HEARD THE SHOW WAS COOL, COULD NOT GO SINCE I'M SAVING
EVERY PENNY TO GET MY BLAZER SHIPPED HOME, IT IS STILL IN CALI,

BLAZER BED SIDES WOULD B GREAT FOR OLD BLAZERS LIKE THE ONE THAT I
AM SELLING, MY OLD ONE HAS A GOOD FLOOR AND WHEEL TUBS, BUT HAS
THE OVER THE WHEEL TYPICAL RUST SOME OF BLAZERS ARE FAMOUS FOR.

mikeperez22 · 07-11-2004, 08:24 PM

Do you have any interest in selling them? I am in need of both sides.

red71cheyenne · 07-12-2004, 08:41 PM

You might want to check and see if Paul or Wes can use them for a while to make templates from for repop parts. I know they don't sell the Blazer sides. Hopefully they will see this. Jeff.

*racedvl* · 07-12-2004, 11:15 PM

Quote:

Originally Posted by red71cheyenne

You might want to check and see if Paul or Wes can use them for a while to make templates from for repop parts. I know they don't sell the Blazer sides. Hopefully they will see this. Jeff.

I'm with him!!!! Although I don't own a Blazer (YET!) we need to get any parts repoped that we can, to help save these wounderful era of trucks!

Huck · 07-13-2004, 08:07 AM

If these were complete bedsides with the inner and outer, then I would consider making them available for repopping like the short bed bedsides. But these are just the outer skins and are very fragile. I have see complete NOS blazer bedsides at swap meets for $500. a piece but haven't had the $$$ at the time to buy them. Not sure the demand would equal the cost to have just the outer skins reproduced as shipping would be a ugly.

mikeperez22 · 07-13-2004, 07:23 PM

So what do you plan to do with them?

07-11-2004, 04:11 PM	#1
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Blazer Bedsides!! The board meet / Super Chevy Show at Indi was wet, hot and not terribly busy business wise when it came to selling. But, I did manage to find something kind of interesting---Blazer wise. How about a pair of Blazer bedside outer skins, door jam to rear tailight. One is a NOS never installed while the other appears to have been separated from it's inner at some point. I may not have ever been installed either!! Both sides have some very minor dings from handling and some typical very light surface rust (rubs off with your hand!) from sitting a while. I asked a buddy of mine who used to work in a body shop in the 70's and he said you could order an outer skin rather then a complete bedside! I'll take a few pictures after I pull them from the trailer~~~

07-11-2004, 04:34 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,482	HEY HUCK, I HEARD THE SHOW WAS COOL, COULD NOT GO SINCE I'M SAVING EVERY PENNY TO GET MY BLAZER SHIPPED HOME, IT IS STILL IN CALI, BLAZER BED SIDES WOULD B GREAT FOR OLD BLAZERS LIKE THE ONE THAT I AM SELLING, MY OLD ONE HAS A GOOD FLOOR AND WHEEL TUBS, BUT HAS THE OVER THE WHEEL TYPICAL RUST SOME OF BLAZERS ARE FAMOUS FOR. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-11-2004, 08:24 PM	#3
mikeperez22 Registered User Join Date: Jun 2004 Posts: 31	For Sale? Do you have any interest in selling them? I am in need of both sides.

07-12-2004, 08:41 PM	#4
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	You might want to check and see if Paul or Wes can use them for a while to make templates from for repop parts. I know they don't sell the Blazer sides. Hopefully they will see this. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

07-13-2004, 08:07 AM	#6
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Bedsides If these were complete bedsides with the inner and outer, then I would consider making them available for repopping like the short bed bedsides. But these are just the outer skins and are very fragile. I have see complete NOS blazer bedsides at swap meets for $500. a piece but haven't had the $$$ at the time to buy them. Not sure the demand would equal the cost to have just the outer skins reproduced as shipping would be a ugly.

07-13-2004, 07:23 PM	#7
mikeperez22 Registered User Join Date: Jun 2004 Posts: 31	So what do you plan to do with them?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.