The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-07-2004, 01:31 AM   #1
67_SS396
Registered User
 
Join Date: Mar 2000
Location: Blue Ridge, Tx
Posts: 1,172
Door Slamming

Why is it such a misconseption to most of the public, that when you get in or out of an old car/truck you HAVE to slam the door? We hired a new guy on at work last week and I am training him this week. Well, today was our first day out in the field and of course, I drove. The first time he got in the truck it was SLAM ! I thought the window was going to fall out of the track, he shut it so hard. I politely told him that the doors on the Nugget shut pretty easy, they don't have to be slammed. He did fine the next time, but that was it. After that, he slammed it everytime. After about the fifth time, I jumped his a$$ and told him that the next time he slammed my door, he's riding in the back and I wasn't kidding. Guess what, he quit slamming it. Still harder than he should have, but not near as bad.

I've gone through this the entire time I've owned an older vehicle and still don't understand why people insist on slamming the doors. It makes no sense to me, especially when they are told that they don't need to do it and not to do it. I worked hard to adjust the doors so they shut with ease, not to have some idiot screw up my adjustments with thier slamming.

I'm sure most of you have delt with this phenomenon, what's your thoughts or stories?

I once had a guy slam the door to my '65 so hard that the window fell out of its track and went to the bottom of the door. On top of that, it was at a car show that the truck was entered in. He's not my friend anymore. (for more than that reason though)
__________________
Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers

'66 C10 - The new hot rod

'77 3+3 Dually - 12 valve 4wd conversion tow rig project

'28 Ford 2 door sedan street rod

RevLimit Offroad

"Hang on beer, we can do this."
67_SS396 is offline   Reply With Quote
Old 04-07-2004, 01:53 AM   #2
krazy_texan
Registered User
 
krazy_texan's Avatar
 
Join Date: Oct 2002
Location: West Des Moines, Ia
Posts: 3,233
i have no earthly idea why people do that either, my little brother does that when he gets in my truck and i jump his A** every time for it
__________________
Krazy Texan
My Trucks are made with Wrenches not Chop Sticks
1967 GMC 3/4 ton "Johnny Cash"
1990 v1500 suburban
1967 Ford f100 Swb 4x4 "green bean"


GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO
krazy_texan is offline   Reply With Quote
Old 04-07-2004, 02:12 AM   #3
Warbones
Navel Inspector
 
Warbones's Avatar
 
Join Date: Mar 2003
Location: Wichita, Ks
Posts: 1,373
My kids have the same problem but it's from going from the caddi which is like a pressure chamber and hard to shut to the truck that shuts with ease. I don't sweat the small stuff with them however. I instead focus on a fun day.
__________________
1948 Chevy Aerosedan GONE! I think.
1984 Cadillac Fleetwood Brougham Coupe
WANTED 1967 IMPALA

1967 CST C10 Long Bed with a 283
Warbones is offline   Reply With Quote
Old 04-07-2004, 03:23 AM   #4
67_SS396
Registered User
 
Join Date: Mar 2000
Location: Blue Ridge, Tx
Posts: 1,172
I didn't even think about the newer car's air tight seals. When it comes to my wife's truck ('02 Silverado), you have to shut the doors pretty hard or they won't latch. I think most of the time with most people though, it's a lack of respect.

I'm with ya Warbones, when it comes to the kids, you just grin and bear it. They are worth way more than any vehicle any day. A good day with the little ones is worth more than 10 yrs with a truck.
__________________
Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers

'66 C10 - The new hot rod

'77 3+3 Dually - 12 valve 4wd conversion tow rig project

'28 Ford 2 door sedan street rod

RevLimit Offroad

"Hang on beer, we can do this."
67_SS396 is offline   Reply With Quote
Old 04-07-2004, 07:02 AM   #5
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
My dad has to be the worst one when it comes to that, in his opinion, anything over 15 yrs old should be crushed, and anything that gets less than 25 MPG needs to be against the law...so in hes eyes, my truck is the worst thing on the road.
I'll tell him not to slam the door, and 5 seconds later, he'll slam the door on the "old piece of sh!t". I'll tell him not to open the wingvent, (rivit is missing) and wouldn't you know it, every single time, one block from the house, he's opening the wing vent...had to catch it once. Everyone else does the door slamming, and I get all over everyone of them, but it seems in the "everage joe's" mind, that old vehicles need slammed.
Longhorn Man is offline   Reply With Quote
Old 04-07-2004, 08:26 AM   #6
71-longbed
Its Magically Delicious
 
71-longbed's Avatar
 
Join Date: Jan 2003
Location: oregon
Posts: 2,398
been there ..reminded people many times .... old doesn't mean broken down... these trucks are metal not like your plastic honda over there
__________________
71 C10 LWB
350sbc -TH350
12 bolt 3.42 Posi



Of all my favorite things to do, The utmost is to have a brew.
My love grows for my foamy friend, with each thirst-quenching elbow bend.
Beer so frosty, smooth, and cold it's paradise pure liquid gold.
Yes beer means many things to me that's all for now cus I gotta pee.
71-longbed is offline   Reply With Quote
Old 04-07-2004, 08:28 AM   #7
cwilli84
1FINE69
 
cwilli84's Avatar
 
Join Date: Aug 2003
Location: Detroit, Michigan
Posts: 239
I have the opposite problem with my wife, she never closes it hard enough the catch the full latch on the door. Its probably not aligned right so it take a good tug to get it fully closed. The other thing is my 69 has solid door pannels inside with no armrests so the inside handle takes quite a beating to boot.
__________________
Had a 69 swb fleetside 350zz3 w 400turbo trans oak lined bed with rhino coated sides red exterior. SOLD
cwilli84 is offline   Reply With Quote
Old 04-07-2004, 11:27 AM   #8
70ChevyLongbed
Howzit?!?
 
70ChevyLongbed's Avatar
 
Join Date: Jan 2003
Location: Maryville, TN
Posts: 1,266
Okay... I gotta admit it, I've done it to myself My Bug is like Warbones' Caddi and if you don't shut the doors hard enough they will not close... so when I go from the car to the truck I have forgotten :p Now granted, my truck is a beater compared to some of yours.

One day last summer I had the windows down on the Bug (so no air pressure) and almost broke the window! No damage, but DANG... "..easy on the paint there, fella!"
__________________
Jason
Hawaiian-J

70 Longbed, 307, Edelbrock Carb 1404, Edelbrock Intake 2101, Dual Roller Timing chain and gears, 214/214 cam, Comp Roller Rockers, dual Flowmasters.
1999 Chevy Tahoe
2004 Mini Cooper S
71 BMW 2002 - Sold
70ChevyLongbed is offline   Reply With Quote
Old 04-07-2004, 08:20 PM   #9
jhwkns
Registered Cruiser
 
jhwkns's Avatar
 
Join Date: May 2002
Location: Las Vegas NV
Posts: 2,230
WHAM! I cringe every time someone slams my door. What bothers me too is when people lean on an open door.
__________________
I intend to live forever. So far, so good.
jhwkns is offline   Reply With Quote
Old 04-07-2004, 08:58 PM   #10
Spoof
Registered User
 
Spoof's Avatar
 
Join Date: Jul 2000
Location: Victoria,BC, Canada
Posts: 1,300
It's just what your used to riding in that sets your slam calibration...thats all. Habit. The prob with our trucks is it's like being inside a drum. Next time bail out first!
Y'know what I hate, our drive way slants towards the house and when my wife and kids jump out of the Durango they just let the doors swing open and bounce to a stand still...bounce,bounce...bounce. Grrrrrrrrrrrrrrr.
__________________
71 GMC 1500 LWB
Spoof is offline   Reply With Quote
Old 04-07-2004, 09:16 PM   #11
Russell
Professional Grade
 
Russell's Avatar
 
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
People do that to my truck all the time... Drives me nuts!

I usually "help" them into the truck first, then close the door myself so it doesn't get slammed, lol

Scores points with the ladies, and saves the poor truck's door...

The annoying part is that the passenger door actually closes easier than the driver's door too, lol
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)
Russell is offline   Reply With Quote
Old 04-09-2004, 04:17 PM   #12
Jim68
Registered User
 
Jim68's Avatar
 
Join Date: Apr 2000
Location: Mesa, AZ
Posts: 135
haha Rusell, mines exactly the same way so as soon as I get fifty bucks I'm replacing the latch mechanism.
__________________
68 long fleetside C-10, '74 350, CH465 4-speed, Edelbrock Performer 1406 Carb, Hedman Hedders, 50 Series Flowmasters
Mesa, AZ
Jim68 is offline   Reply With Quote
Old 04-09-2004, 04:31 PM   #13
theo70
COMING SOON...
 
theo70's Avatar
 
Join Date: Feb 2003
Location: Ft Worth TX
Posts: 408
People do that to my truck all the time, and I think, "how hard is this to remember?" But everytime I get into my brother in law's '70 Goat, don't ya know it...BAM!
I'm always paranoid of old cars' doors because my dad's 1950 Chevy truck would swing open without warning on the highway.
theo70 is offline   Reply With Quote
Old 04-09-2004, 05:05 PM   #14
Southpa
Registered User
 
Southpa's Avatar
 
Join Date: May 2000
Location: Victoria, BC, Canada
Posts: 2,410
When I was about 14, so many years ago now, we all went to a restaurant for dinner. My little brother and I were in the back seat. When getting out of the car I naturally assumed my brother was getting out the other side. I jump out and slam the door right across the side of his head! OOPS! sorry!

Anyway, yeah I feel the same way about the way passengers close my doors. One friend slammed the door so hard I figured glass would break, good thing the window was shut tight, otherwise it would have popped. Since I replaced the door rubbers I tell passengers to close their door "with authority" because it takes longer for the rubber to settle in as that side is used less. That particularly doesn't mean slamming, ie. letting the door go halfway thru the swing. I mean you keep your hand firmly on the door handle and close it all the way while maintaining constant pressure on contact, just common sense. I shouldn't have to write a manual on it for these guys.
__________________
1970 GMC 1500 Custom
Original 350/TH350
Victoria, BC, Canada


You can wish in one hand and crap in the other.
See which one gets filled first.
Southpa is offline   Reply With Quote
Old 04-09-2004, 10:02 PM   #15
race2c
<--Thanks 86 Red Bowtie
 
race2c's Avatar
 
Join Date: Aug 2003
Location: Mt. Zion IL (Home) Stillwater, OK (School)
Posts: 140
I have the same problem when people get in and out the '89. I also ask them why they had to slam the door but appearantly to some people it is just a truck. They have yet to realize it is my daily driver and only means of transpotation. Once they get a vehicle, I should do it to their cars. The Golden Rule can always come back to hunt.

Cam
__________________
race2c@aol.com

1941 Willys Coupe--Currently being put together. Willy Works fiberglass car.

1969 Chevy K10 SWB--SOLD!!!

1989 Chevy Silverado Z71 RCSB--SOLD!!!

1993 Pontiac Grand Prix--College Commuter
race2c is offline   Reply With Quote
Old 04-09-2004, 11:09 PM   #16
hobby67stepside
Registered User
 
Join Date: Dec 2001
Location: NW Iowa
Posts: 952
That is one of my pet peeves too. I just hate it when people slam doors - my house doors too. I've got my immediate family trained and I don't usually have other people in my vehicles so I don't have to get cranked often.
__________________
  • '05 2500 HD Silverado 6.0 liter
    '97 2500 4X4 454 eng
    '92 2500 4X4 350 eng
    '78 K20 4X4 400 eng
    '70 Boss 302 (owner for 27 years)
    '57 Ford shortbox 383 stroker TH350 tranny
    '23 T-bucket (built in '78)
    '02 Explorer
    '67 C-10 short step
NW Iowa
hobby67stepside is offline   Reply With Quote
Old 04-10-2004, 12:08 AM   #17
72-396
Registered User
 
Join Date: Nov 2003
Location: tulsa ok
Posts: 55
I have a friend that every time he rides in my truck he slams the door. I hate it Ive told him so many times but he still does it. I have thought about putting a bracket on the door with a ball on the end that smashes into the person as they slam it!
__________________
1972 K20 custom camper 4x4 LWB 396 700r4
1965 chevy II 420 hp s/b 4 speed
72-396 is offline   Reply With Quote
Old 04-10-2004, 08:51 AM   #18
Faster_than_you
Registered User
 
Join Date: Mar 2004
Location: Virginia beach, Va
Posts: 209
remedy

haha, well on my drivers door, I still need to adjust it a little. so I just pull it in and then hank it hard. I dont take the chance of some numbnuts to slam my door, so everytime I have a passenger I will open the door, and close it for them.
My uncle had a good remidy for door slamming. when I as 13 I worked with him and my cousin on the farm. well one day we were picking up some wood, and I had accidentally slammed the door. hopping out really fast and the momentum on swingin around catching the door made it close quite fast.
anyways, He came hauling ass around the truck, cussin at me. He said ok here close the door ten times slowly. I did that and not one more time after that have I ever slammed a door.
__________________
~Christopher L. Orr
71 c20, 454- Stolen While Deployed. dynoed at 550 ft lbs, 425 hp at 3000 rpm (mustang dyno). TH400 3500 stall.... etc, etc.
Faster_than_you is offline   Reply With Quote
Old 04-10-2004, 11:41 AM   #19
72-396
Registered User
 
Join Date: Nov 2003
Location: tulsa ok
Posts: 55
ok that's what I will do, it will not be long before someone rides in it and I will give it a shot
thanks
__________________
1972 K20 custom camper 4x4 LWB 396 700r4
1965 chevy II 420 hp s/b 4 speed
72-396 is offline   Reply With Quote
Old 04-10-2004, 02:02 PM   #20
dregs454
Killin' Time
 
dregs454's Avatar
 
Join Date: Jul 2002
Location: Calgary, Alberta
Posts: 221
my doors need to be slammed - outta alignment, but it does piss me off when good doors are slammed

just to comment on what race2c said
Quote:
to some people it is just a truck
That mentality drives me crazy, my dad was throwing a big fence post with a big long piece of rebar from the back of the truck, and of course he threw it so the rebar stuck in the ground, and the post flew back, and made a big dent right above the tail lights. His reply to all of my cursing " its just a truck". Soo, its just a truck, the purpose of trucks is to just be dented and smashed, who cares, thats what trucks are for... well my truck might be a beater, but now i have one more dent to fix, and it will be a hard one too.....
__________________
NEED CORVETTE

1972 GMC C20
350, SM465, HEI
Dynomax headers and 2.5" duals
dregs454 is offline   Reply With Quote
Old 04-10-2004, 09:24 PM   #21
botboy
Account Suspended
 
Join Date: Dec 2003
Location: Delano, MN
Posts: 630
Quote:
Originally posted by Longhorn Man
My dad has to be the worst one when it comes to that, in his opinion, anything over 15 yrs old should be crushed, and anything that gets less than 25 MPG needs to be against the law...so in hes eyes, my truck is the worst thing on the road.
I'll tell him not to slam the door, and 5 seconds later, he'll slam the door on the "old piece of sh!t". I'll tell him not to open the wingvent, (rivit is missing) and wouldn't you know it, every single time, one block from the house, he's opening the wing vent...had to catch it once. Everyone else does the door slamming, and I get all over everyone of them, but it seems in the "everage joe's" mind, that old vehicles need slammed.
No offense...he seems to have raised you alright (better than alright - a fan of 67-'72's!) but your dad seems like he really needs a good beating. Probably loves hondas too
botboy is offline   Reply With Quote
Old 04-10-2004, 09:59 PM   #22
lock
Insert funny comment.
 
lock's Avatar
 
Join Date: Dec 1999
Location: Concord NC
Posts: 621
Maybe because of the weight? Alot of new cars have light doors and fiberglass skins. Our old truck doors are good old steel baby!
lock is offline   Reply With Quote
Old 04-10-2004, 11:30 PM   #23
71Chevy4-speed
Speed Limit = Floorboard
 
71Chevy4-speed's Avatar
 
Join Date: Jan 2004
Location: Kasilof, Alaska
Posts: 803
haha I slam mine every now and then by accident...usually cause of a hill and not thinking. Hardly do it though because my step dad's 97 dodge's doors shut real light. Mom 2003 envoy front doors have an i-beam in them to protect the driver and passenger seat...so they shut like a blast door... I always have to shut it twice. The back doors don't have the i-beam though so I end up slamming them then...annoying.
__________________
1971 C20 350, 4-speed - Sold.
1985 K10 350, Built 700r4, Edel 1406, Performer intake, MSD Ign, Hooker Comps, Silverstars, Piaa drivers, LED tails, Toyo A/T 31's, Eaton Posi, the project.
"Build for torque, horsepower will follow"
71Chevy4-speed is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com