WIW 1/2 ton CCSB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joe231 · 10-04-2010, 11:52 AM

Trying to figure out the value of my square body 1/2 ton crew cab short bed with a 89-91 front clip.
It has a pretty fresh (@30k miles) 350 crate motor with TBI, a recently rebuilt 700R-4 trans (@5K miles), rebuilt 10 bolt with 3.73's from a 1995 chevy truck (driveshaft professionally shortened and balanced).
It is mechanically sound. Interior is good and matches from a '89 burb, needs the headliner installed, with power windows and locks. Lowered @ 5"/7". 3" spindles and a coil cut off the springs in the front and flipped with notches in the rear. I have installed a 32 gallon 'burb tank in the rear. Nice cold A/C (new compressor and condensor), tilt wheel, and cruise control. Body is pretty straight, no rust, but it needs paint. What do you guys think on value?
Here is a pic
It has a burb bumper on it now

Pics of the interior while I was installing it

And the dash my wife covered

Posted via Mobile Device

**Clyde65** · 10-04-2010, 04:51 PM

I would LOVE to have it, however like everyone, no $.

I have noticed that it seems that unless it "looks" pretty no one wants it, sad in my opinion, you have put alot in your truck in time, money and knowlege, but most might think that since it isnt "stock"' they are leary.

I have seen a truck like your truck in CL here in DFW, I cant remember what the price was but it was on there for a little while.

Let me know what you decide, also would you post some interior pics, might make a difference for someone.

Jonboy · 10-04-2010, 06:24 PM

I hate to be the one to tell you Joe, but it isn't worth much at all. however, being the good friend that I am, I will take it off of your hands so you don't have to look at it anymore.

Honestly, I think location has a lot to do with it. Wasn't there one in OK that was up for $3500 or so? If you do decide to let it go, I might be a player for it, depending on price.

joe231 · 10-04-2010, 06:42 PM

Quote:

Originally Posted by Clyde65

I would LOVE to have it, however like everyone, no $.

I have noticed that it seems that unless it "looks" pretty no one wants it, sad in my opinion, you have put alot in your truck in time, money and knowlege, but most might think that since it isnt "stock"' they are leary.

I have seen a truck like your truck in CL here in DFW, I cant remember what the price was but it was on there for a little while.

Let me know what you decide, also would you post some interior pics, might make a difference for someone.

Thanks
I'll try to post some more pics this evening....I'm out of town working so I'm limited to what I have on my phone.

Quote:

Originally Posted by Jonboy

I hate to be the one to tell you Joe, but it isn't worth much at all. however, being the good friend that I am, I will take it off of your hands so you don't have to look at it anymore.

Honestly, I think location has a lot to do with it. Wasn't there one in OK that was up for $3500 or so? If you do decide to let it go, I might be a player for it, depending on price.

I know of one in DFW that sold for $3500 in a matter of minutes after it was posted on craigslist, that tells me he wasn't asking enough

There is one currently for sale in Duncan for $4500.
I dunno if I'd let it go for $4500. I'm really wanting a 4x4 and I'm weighing the options, sell it and buy a 4x4 or convert it over. I love the truck so I just don't know......
I have thought about throwing it on craigslist for $6000 to just see what happens. If I do sell it, I'm gonna do sone body work and get it all in sealer first.
Thanks for the input guys!!!!
Posted via Mobile Device

joe231 · 10-04-2010, 09:12 PM

Added pics to the first post

Posted via Mobile Device

**Palf70Step** · 10-04-2010, 10:21 PM

I'd love to take that off your hands, but like so many others...no cash.

joe231 · 10-04-2010, 10:46 PM

Ok
So if you had money, how much would it be worth to you?
Posted via Mobile Device

**Palf70Step** · 10-05-2010, 02:25 AM

I'd say in the 4500 to 5500 range seems about correct. Like was mentioned, it may be hard to get someone to go much more because it isn't a completed or painted project.

joe231 · 10-05-2010, 07:22 AM

Cool
Thanks Bill!
Posted via Mobile Device

**Palf70Step** · 10-07-2010, 03:03 AM

No problem. Tooo bad you don't want a shortie 02 truck in stead of a 4x4.

joe231 · 10-07-2010, 07:03 AM

Yeah, too bad

**Clyde65** · 10-07-2010, 05:29 PM

Jo,

The one in Duncan is the one I am thinking about, it needs alot of interior work along with exhaust so it isnt even a running driving truck like yours. I wouldnt pay $4500 for that one, maybe $3k if I had it. The thing about selling bigger ticket items on CL is someone just has to be looking for that exact thing in order for them to pay " what its worth" to the seller. I would be flexible with your price if you do decide to sell it like that.

BTW, if it were me, I would just convert it and continue to enjoy.

joe231 · 10-07-2010, 06:01 PM

Thanks Clyde!
One of the members here actually went and looked at the one in Duncan, he said he would have given $3000 for it. It didn't run very well and the trans wouldn't shift out of second, so it definitely needs some work.

I really like my truck, I'm pretty sure I'm keeping it.
Maybe 4x4 conversion will be phase III, after phase II (paint), followed by phase IV (LS power!)

Posted via Mobile Device

STOCKISH · 10-08-2010, 08:29 AM

LS POWAAAAAA! and convert to 4x4 also!!!

**Palf70Step** · 10-08-2010, 08:34 AM

Glad you are looking at keeping it Joe. You have a lot of time in the ole girl and have done wonders too her. Just keep massaging here till you get where you want her, including 4x4.

Kinda like one of them movie stars, just keep going back to the surgeon to refine the look.

joe231 · 10-08-2010, 08:38 AM

Thanks guys!
It's my never-ending project

Posted via Mobile Device

**Clyde65** · 10-08-2010, 03:12 PM

Joe,

I have had mine for 21+ years....so maybe you can try and catch up?!

I like your idea, keep her and do the LS 1st, you wont regret it! I dont!

joe231 · 10-08-2010, 03:27 PM

Where's the pics?!?!
Posted via Mobile Device

**Clyde65** · 10-08-2010, 04:36 PM

pics added. These were before my LS install, I am looking for those pics now, not many of them I bet.

joe231 · 10-08-2010, 05:15 PM

I'd love to put a LS in the wife's 66 also

Posted via Mobile Device

**Clyde65** · 10-08-2010, 05:56 PM

Do it, the 5.3's are pretty cheap unless you want one with less than 10K miles or something. I lucked out, mine was supposed to be an 07, but when I got it it said 2005, I called LKQ and *****ed, they refunded me $200, so the motor cost me $450.00 and it had 9K miles on it ( no one wants a 4.8 I guess) I have the 4l60e trans also and it runs and drives soooo nice. Knowing what I know now, I wish I would have done a few things different but I was really tight on my budget and I was only able to work on it every other weekend and some nights. it took me 7 months to finish.

I would do it again and again, if you decide, let me know, i would be glad to help in anyway I could.

joe231 · 10-08-2010, 06:02 PM

Righ on!
So you paid $650 for it originally???
And it's a 4.8?
Did it come with everything?
Smoking deal made even better with the refund.
I want to put a 4.8L in the '66 and a 5.3L in the crew.
Posted via Mobile Device

**Clyde65** · 10-08-2010, 06:23 PM

There ya go, now I warped you properly. yes 4.8L

Yes I got it from North Texas LKQ and it cost 650.00 It had everything but the harness, PCM and Alternator. I could have gotten them but I already bought a motor with all that before and it turned out to be a boat anchor so I sent the boat anchor back.

Right now 2008 4.8 is going for 800 with 10K miles. Now the demand is up I see. The 5.3's are going for 1K-1500.00 depending on mileage and this is also without accessories, you would need to call and ask.

2005 4.8 with 100K runs $400.

joe231 · 10-08-2010, 06:29 PM

cool
thanks for the info!

Jonboy · 10-08-2010, 06:34 PM

I had found a complete 5.3 takeout with 125K for $1500. That should be everything needed, such as accessories, wiring, trans, TAC, etc. It sounded a little miley to me, so I am holding out for one with a little lower mileage. Hopefully soon, though. 2005 year model, out of an Avalanche.

10-04-2010, 11:52 AM	#1
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	WIW 1/2 ton CCSB Trying to figure out the value of my square body 1/2 ton crew cab short bed with a 89-91 front clip. It has a pretty fresh (@30k miles) 350 crate motor with TBI, a recently rebuilt 700R-4 trans (@5K miles), rebuilt 10 bolt with 3.73's from a 1995 chevy truck (driveshaft professionally shortened and balanced). It is mechanically sound. Interior is good and matches from a '89 burb, needs the headliner installed, with power windows and locks. Lowered @ 5"/7". 3" spindles and a coil cut off the springs in the front and flipped with notches in the rear. I have installed a 32 gallon 'burb tank in the rear. Nice cold A/C (new compressor and condensor), tilt wheel, and cruise control. Body is pretty straight, no rust, but it needs paint. What do you guys think on value? Here is a pic It has a burb bumper on it now Pics of the interior while I was installing it And the dash my wife covered Posted via Mobile Device __________________ *CHEVY ONLY* Last edited by joe231; 10-04-2010 at 07:48 PM.

10-04-2010, 04:51 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: WIW 1/2 ton CCSB I would LOVE to have it, however like everyone, no $. I have noticed that it seems that unless it "looks" pretty no one wants it, sad in my opinion, you have put alot in your truck in time, money and knowlege, but most might think that since it isnt "stock"' they are leary. I have seen a truck like your truck in CL here in DFW, I cant remember what the price was but it was on there for a little while. Let me know what you decide, also would you post some interior pics, might make a difference for someone. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 10-04-2010 at 04:52 PM.

10-04-2010, 06:24 PM	#3
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: WIW 1/2 ton CCSB I hate to be the one to tell you Joe, but it isn't worth much at all. however, being the good friend that I am, I will take it off of your hands so you don't have to look at it anymore. Honestly, I think location has a lot to do with it. Wasn't there one in OK that was up for $3500 or so? If you do decide to let it go, I might be a player for it, depending on price. __________________ 1974 Jimmy- 5.3/4L80e/NP241

10-04-2010, 09:12 PM	#5
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: WIW 1/2 ton CCSB Added pics to the first post Posted via Mobile Device __________________ *CHEVY ONLY*

10-04-2010, 10:21 PM	#6
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,090	Re: WIW 1/2 ton CCSB I'd love to take that off your hands, but like so many others...no cash. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-04-2010, 10:46 PM	#7
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: WIW 1/2 ton CCSB Ok So if you had money, how much would it be worth to you? Posted via Mobile Device __________________ *CHEVY ONLY*

10-05-2010, 02:25 AM	#8
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,090	Re: WIW 1/2 ton CCSB I'd say in the 4500 to 5500 range seems about correct. Like was mentioned, it may be hard to get someone to go much more because it isn't a completed or painted project. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-05-2010, 07:22 AM	#9
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: WIW 1/2 ton CCSB Cool Thanks Bill! Posted via Mobile Device __________________ *CHEVY ONLY*

10-07-2010, 03:03 AM	#10
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,090	Re: WIW 1/2 ton CCSB No problem. Tooo bad you don't want a shortie 02 truck in stead of a 4x4. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-07-2010, 07:03 AM	#11
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: WIW 1/2 ton CCSB Yeah, too bad __________________ *CHEVY ONLY*

10-07-2010, 05:29 PM	#12
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: WIW 1/2 ton CCSB Jo, The one in Duncan is the one I am thinking about, it needs alot of interior work along with exhaust so it isnt even a running driving truck like yours. I wouldnt pay $4500 for that one, maybe $3k if I had it. The thing about selling bigger ticket items on CL is someone just has to be looking for that exact thing in order for them to pay " what its worth" to the seller. I would be flexible with your price if you do decide to sell it like that. BTW, if it were me, I would just convert it and continue to enjoy. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

10-07-2010, 06:01 PM	#13
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: WIW 1/2 ton CCSB Thanks Clyde! One of the members here actually went and looked at the one in Duncan, he said he would have given $3000 for it. It didn't run very well and the trans wouldn't shift out of second, so it definitely needs some work. I really like my truck, I'm pretty sure I'm keeping it. Maybe 4x4 conversion will be phase III, after phase II (paint), followed by phase IV (LS power!) Posted via Mobile Device __________________ *CHEVY ONLY*

10-08-2010, 08:29 AM	#14
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: WIW 1/2 ton CCSB LS POWAAAAAA! and convert to 4x4 also!!! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

10-08-2010, 08:34 AM	#15
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,090	Re: WIW 1/2 ton CCSB Glad you are looking at keeping it Joe. You have a lot of time in the ole girl and have done wonders too her. Just keep massaging here till you get where you want her, including 4x4. Kinda like one of them movie stars, just keep going back to the surgeon to refine the look. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-08-2010, 08:38 AM	#16
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: WIW 1/2 ton CCSB Thanks guys! It's my never-ending project Posted via Mobile Device __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

10-08-2010, 03:12 PM	#17
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: WIW 1/2 ton CCSB Joe, I have had mine for 21+ years....so maybe you can try and catch up?! I like your idea, keep her and do the LS 1st, you wont regret it! I dont! Attached Images __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 10-08-2010 at 04:35 PM.

10-08-2010, 03:27 PM	#18
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: WIW 1/2 ton CCSB Where's the pics?!?! Posted via Mobile Device __________________ *CHEVY ONLY*

10-08-2010, 04:36 PM	#19
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: WIW 1/2 ton CCSB pics added. These were before my LS install, I am looking for those pics now, not many of them I bet. Attached Images __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 10-08-2010 at 04:47 PM.

10-08-2010, 05:15 PM	#20
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: WIW 1/2 ton CCSB I'd love to put a LS in the wife's 66 also Posted via Mobile Device __________________ *CHEVY ONLY*

10-08-2010, 05:56 PM	#21
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: WIW 1/2 ton CCSB Do it, the 5.3's are pretty cheap unless you want one with less than 10K miles or something. I lucked out, mine was supposed to be an 07, but when I got it it said 2005, I called LKQ and ***ed, they refunded me $200, so the motor cost me $450.00 and it had 9K miles on it ( no one wants a 4.8 I guess) I have the 4l60e trans also and it runs and drives soooo nice. Knowing what I know now, I wish I would have done a few things different but I was really tight on my budget and I was only able to work on it every other weekend and some nights. it took me 7 months to finish. I would do it again and again, if you decide, let me know, i would be glad to help in anyway I could. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops!** Last edited by Clyde65; 10-08-2010 at 05:57 PM.

10-08-2010, 06:02 PM	#22
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: WIW 1/2 ton CCSB Righ on! So you paid $650 for it originally??? And it's a 4.8? Did it come with everything? Smoking deal made even better with the refund. I want to put a 4.8L in the '66 and a 5.3L in the crew. Posted via Mobile Device __________________ *CHEVY ONLY*

10-08-2010, 06:23 PM	#23
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: WIW 1/2 ton CCSB There ya go, now I warped you properly. yes 4.8L Yes I got it from North Texas LKQ and it cost 650.00 It had everything but the harness, PCM and Alternator. I could have gotten them but I already bought a motor with all that before and it turned out to be a boat anchor so I sent the boat anchor back. Right now 2008 4.8 is going for 800 with 10K miles. Now the demand is up I see. The 5.3's are going for 1K-1500.00 depending on mileage and this is also without accessories, you would need to call and ask. 2005 4.8 with 100K runs $400. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 10-08-2010 at 06:24 PM.

10-08-2010, 06:29 PM	#24
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: WIW 1/2 ton CCSB cool thanks for the info! __________________ *CHEVY ONLY*

10-08-2010, 06:34 PM	#25
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: WIW 1/2 ton CCSB I had found a complete 5.3 takeout with 125K for $1500. That should be everything needed, such as accessories, wiring, trans, TAC, etc. It sounded a little miley to me, so I am holding out for one with a little lower mileage. Hopefully soon, though. 2005 year model, out of an Avalanche. __________________ 1974 Jimmy- 5.3/4L80e/NP241 Last edited by Jonboy; 10-08-2010 at 06:34 PM.

Register or Log In To remove these advertisements.