Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
04-10-2024, 02:17 PM | #1 |
Senior Member
Join Date: Apr 2022
Location: Hillsboro, Oregon
Posts: 415
|
Re: Bucket seat mounting options??
This is the thread I did when I converted my truck to buckets.
https://67-72chevytrucks.com/vboard/...d.php?t=845608 In short I used 66/67 Chevelle bucket seat tracks and made my own risers and adaptors on the seat frame. Then on the floor I used the stock bench seat holes on the outside on both sides and then put a strap across and dilled new holes to hold the strap down. Then I drilled and countersunk some screws to act as studs in the strap. Thats all under the carpet and only the 4 studs poke up for the seat to bolt to. Its setup so I can easily remove the seats and console by myself if I need to yank the tank for any reason.
__________________
The Twins: 1968 C10 SWB - Blue 327/5 Speed 1968 Camaro SS/RS - Blue 327/4speed C10 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=833278 The "Others" 1933 Ford Pickup (Camaro in disguise) 2017 Camaro SS Life long Chevy guy |
Bookmarks |
|
|