What have you done to your 67-72 Chevrolet/GMC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gmcdude · 11-30-2009, 05:30 PM

I 've seen this on the other years of chevys topix but never seen it here, so what have you done to your truck today?

**68jewel** · 11-30-2009, 05:42 PM

Quote:

Originally Posted by gmcdude

I 've seen this on the other years of chevys but never seen it here, so what have you done to your truck today?

You've seen what on other years??

gmcdude · 11-30-2009, 06:00 PM

60-66 maybe but I'm posting for the years of 67-72.

dadsworktruck · 11-30-2009, 06:45 PM

I accepted the fact that our rust repair wont be done in 2009.

oldblue1968chevy · 11-30-2009, 06:26 PM

today, I put a better looking centercap on, my heater quit blowing hot air, and its not the fuse, but I got too cold being outside tomorow Im going to the exhaust shop to get a missing exhaust tip and have them weld my exhaust on (tailpipes flopping) then ima change the oil and do a few other things..im always doing something to the ol thing

retodd7711 · 11-30-2009, 06:35 PM

Flipped it off.

gmcdude · 11-30-2009, 06:43 PM

I put a fuel filter on my 72 Gmc shortbed.But still no gas. Going to get gas to see if thats the problem.

PanelDeland · 11-30-2009, 06:45 PM

Drove it to work.

oldblue1968chevy · 11-30-2009, 06:50 PM

i drove mine to school today too

big_al_71 · 11-30-2009, 06:51 PM

I walked by it this morning as I was going out of the garage and just tapped it on the tailgate.....

JWall · 12-01-2009, 12:47 PM

Quote:

Originally Posted by big_al_71

I walked by it this morning as I was going out of the garage

Same here

justagoodolboy · 12-01-2009, 03:11 PM

On my way to work I drove by the shop where my truck is being worked on and noticed the bed sitting outside.I figured that meant something was getting done yesterday!

BAGNDRAGIT · 12-01-2009, 03:45 PM

started re-wiring the engine bay, what did i just get myself into?

ah well, at least i know it will be reliable now.
still confused as to why one of my turn signals has a constant 12v, and the other doesn't, same flasher....did i miss something.

**americanmusc1e** · 11-30-2009, 06:54 PM

drove mine to college, looked at how low the gas gauge was, thought about my thermostat(which is stuck open in low 50 degree weather), wished my heater was hooked up so I wasn't freezing, left a black mark and some smoke

FRIDAY, on the other hand, I took it to the streets and lost to a stock '95 LT1 Camaro, and beat a modded Toyota Tundra................I need a 3.73 or 4.10 posi baaaaad

rwolf9653 · 11-30-2009, 07:11 PM

nothing

Sinister · 11-30-2009, 07:16 PM

Nothing today, but I put in new shocks and a new power steering pump last week.

smoky02 · 11-30-2009, 07:17 PM

Drove it to work today to make sure that it is no longer loosing water...

C20-67_N_MO · 11-30-2009, 07:27 PM

Looked at it in the body shop.

and same as Dadsworktruck will not be finished with rust repair in this year as well.

mindhive · 11-30-2009, 07:32 PM

Etched most of the rust and old paint off of my inner fenders with muriatic acid. I love the look of new metal.

Crazyz28 · 11-30-2009, 07:38 PM

I thought about pushing mine into the shop to work on it, but didn't have the motivation even though I have a bunch of parts to put on from this last weekends Turkey Rod Run swap meet. More money spent, yet not enough money to get it on the road.

Mxracer202 · 11-30-2009, 08:04 PM

Quote:

Originally Posted by Crazyz28

More money spent, yet not enough money to get it on the road.

Same

my DD is gonna have to be taken to the shop soon so all the money for my C10 is gone for a while

Ackattack · 11-30-2009, 07:38 PM

Put in a request to take Wednesday off of work so I can work on the truck all day!

OldSkool71 · 11-30-2009, 08:06 PM

Pull it out of the garge...drove it to get something to eat...put it back in...pulled it out again...used the detail spray for a good shine...cleaned the windows...wheels...and put some tire dressing on...then put her back in the garage for another day....

squirel · 11-30-2009, 08:16 PM

Started the install of my gm performance fast burn 385. First time it has had a engine in it in 18 years

**NGN** · 11-30-2009, 08:23 PM

i started to glass bead another five lug steel rim to replace my six lug for my soon to be power disc brakes

11-30-2009, 05:30 PM	#1
gmcdude Registered User Join Date: Jul 2009 Location: Abingdon, Virginia Posts: 300	What have you done to your 67-72 Chevrolet/GMC I 've seen this on the other years of chevys topix but never seen it here, so what have you done to your truck today? Last edited by gmcdude; 11-30-2009 at 05:56 PM.

11-30-2009, 06:00 PM	#3
gmcdude Registered User Join Date: Jul 2009 Location: Abingdon, Virginia Posts: 300	Re: What have you done to your 67-72 Chevrolet/GMC 60-66 maybe but I'm posting for the years of 67-72.

11-30-2009, 06:45 PM	#4
dadsworktruck Registered User Join Date: Jul 2009 Location: blacksburg,s.c. Posts: 155	Re: What have you done to your 67-72 Chevrolet/GMC I accepted the fact that our rust repair wont be done in 2009. Attached Images

11-30-2009, 06:26 PM	#5
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: What have you done to your 67-72 Chevrolet/GMC today, I put a better looking centercap on, my heater quit blowing hot air, and its not the fuse, but I got too cold being outside tomorow Im going to the exhaust shop to get a missing exhaust tip and have them weld my exhaust on (tailpipes flopping) then ima change the oil and do a few other things..im always doing something to the ol thing __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-30-2009, 06:35 PM	#6
retodd7711 chrome makes it go FASTER! Join Date: Feb 2007 Location: Cleveland Tennessee Posts: 2,884	Re: What have you done to your 67-72 Chevrolet/GMC Flipped it off. __________________ She can't cook and she won't clean. But she looks good in a skirt and she brings me beer. She can stay for now. EDIT:: But she left me anyway, So forget her. 1962 GMC Stepside V6 4 speed My rolling resto thread http://67-72chevytrucks.com/vboard/s...d.php?t=324226 My old farm truck http://67-72chevytrucks.com/vboard/s...=1#post3465005

11-30-2009, 06:43 PM	#7
gmcdude Registered User Join Date: Jul 2009 Location: Abingdon, Virginia Posts: 300	Re: What have you done to your 67-72 Chevrolet/GMC I put a fuel filter on my 72 Gmc shortbed.But still no gas. Going to get gas to see if thats the problem.

11-30-2009, 06:45 PM	#8
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: What have you done to your 67-72 Chevrolet/GMC Drove it to work. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

11-30-2009, 06:50 PM	#9
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: What have you done to your 67-72 Chevrolet/GMC i drove mine to school today too __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-30-2009, 06:51 PM	#10
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: What have you done to your 67-72 Chevrolet/GMC I walked by it this morning as I was going out of the garage and just tapped it on the tailgate..... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

12-01-2009, 03:11 PM	#12
justagoodolboy Under Construction Join Date: Sep 2009 Location: Summersville MO Posts: 176	Re: What have you done to your 67-72 Chevrolet/GMC On my way to work I drove by the shop where my truck is being worked on and noticed the bed sitting outside.I figured that meant something was getting done yesterday! __________________ 72 chevy 4x4-my project 67-72chevytrucks.com/vboard/showthread.php?t=368210 94 Nissan 4x4-Daily Driver and off road beater 03 Saab 9-3 -tripper 90 Polaris Trail Boss- 2 Stroker

12-01-2009, 03:45 PM	#13
BAGNDRAGIT Just Not Low Enough! Join Date: Mar 2009 Location: Phoenix, AZ Posts: 525	Re: What have you done to your 67-72 Chevrolet/GMC started re-wiring the engine bay, what did i just get myself into? ah well, at least i know it will be reliable now. still confused as to why one of my turn signals has a constant 12v, and the other doesn't, same flasher....did i miss something. __________________ NEED ELECTRICAL HELP? ASK ME! 67-72 Full Wiring Diagrams Lots Of Info, TAKE A LOOK 1967 Chevy C-10 Shortbox Bagged 327 4spd Previous: 1971 Chevy C-10 Short Sep I6 Auto (Traded) 1973 Chevy C-20 THE REDNECK BATTLE TRUCK 2001 Chevy Silverado 2Dr 5.3L Shortbox. R.I.P. 1969 Volkswagen Bug This is my first meeting, I have a horsepower problem.

11-30-2009, 06:54 PM	#14
americanmusc1e Senior Member Join Date: Jan 2009 Location: Austin, TX Posts: 1,079	Re: What have you done to your 67-72 Chevrolet/GMC drove mine to college, looked at how low the gas gauge was, thought about my thermostat(which is stuck open in low 50 degree weather), wished my heater was hooked up so I wasn't freezing, left a black mark and some smoke FRIDAY, on the other hand, I took it to the streets and lost to a stock '95 LT1 Camaro, and beat a modded Toyota Tundra................I need a 3.73 or 4.10 posi baaaaad __________________ -- Josh Instagram: @americanmusc1e OLD SKOOL-- 1970 C10. 454/Th400/3.07 posi Build Thread FARM TRUCK----1949 Chevrolet 3800 Power Wagon Hauler Build Thread 1999 4wd OBS Tahoe - daily. DM me if you can't see photos i posted Last edited by americanmusc1e; 11-30-2009 at 08:25 PM.

11-30-2009, 07:11 PM	#15
rwolf9653 more ideas than money Join Date: Dec 2008 Location: spring grove, pa Posts: 1,068	Re: What have you done to your 67-72 Chevrolet/GMC nothing __________________ Randy 1948 Chevy 3100 5 window 1966 Chevy C30 Dually 1967 Chevy K10 1972 Chevy K20 1972 Chevy C10 1972 Chevy K5 Blazer 1987 Chevy V10 2003 Chevy Suburban

11-30-2009, 07:16 PM	#16
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: What have you done to your 67-72 Chevrolet/GMC Nothing today, but I put in new shocks and a new power steering pump last week. __________________ Beat it to fit, Paint it to match...

11-30-2009, 07:17 PM	#17
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	Re: What have you done to your 67-72 Chevrolet/GMC Drove it to work today to make sure that it is no longer loosing water... __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.



Register or Log In To remove these advertisements.

11-30-2009, 07:27 PM	#18
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: What have you done to your 67-72 Chevrolet/GMC Looked at it in the body shop. and same as Dadsworktruck will not be finished with rust repair in this year as well. __________________ Coming Soon: Project 1970 Country Truck

11-30-2009, 07:32 PM	#19
mindhive Registered User Join Date: Jul 2003 Location: Mountain Home ID Posts: 85	Re: What have you done to your 67-72 Chevrolet/GMC Etched most of the rust and old paint off of my inner fenders with muriatic acid. I love the look of new metal.

11-30-2009, 07:38 PM	#20
Crazyz28 Registered User Join Date: Aug 2009 Location: Orlando, FL Posts: 68	Re: What have you done to your 67-72 Chevrolet/GMC I thought about pushing mine into the shop to work on it, but didn't have the motivation even though I have a bunch of parts to put on from this last weekends Turkey Rod Run swap meet. More money spent, yet not enough money to get it on the road.

11-30-2009, 07:38 PM	#22
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Re: What have you done to your 67-72 Chevrolet/GMC Put in a request to take Wednesday off of work so I can work on the truck all day! __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

11-30-2009, 08:06 PM	#23
OldSkool71 C/10 CLUB MEMBER Join Date: Jul 2003 Location: Lakewood, CA Posts: 993	Re: What have you done to your 67-72 Chevrolet/GMC Pull it out of the garge...drove it to get something to eat...put it back in...pulled it out again...used the detail spray for a good shine...cleaned the windows...wheels...and put some tire dressing on...then put her back in the garage for another day.... __________________ -Ron-

11-30-2009, 08:16 PM	#24
squirel Registered User Join Date: Oct 2003 Location: calgary alberta canada Posts: 198	Re: What have you done to your 67-72 Chevrolet/GMC Started the install of my gm performance fast burn 385. First time it has had a engine in it in 18 years Attached Images __________________ In some foreign language "merge" means to stop and turn your head left. My build page http://67chev.shawwebspace.ca/

11-30-2009, 08:23 PM	#25
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 832	Re: What have you done to your 67-72 Chevrolet/GMC i started to glass bead another five lug steel rim to replace my six lug for my soon to be power disc brakes

Register or Log In To remove these advertisements.