CA 72 cst blazer project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

13lazer · 10-02-2010, 01:12 PM

i am getting rid of my one ton blazer project. this truck is in pieces right now. i want to get rid of the whole project at one time, unless someone only needs the tub. if someone takes the body off my hands i will part out the rest. my main priority is that i don't have room for the body anymore.
here's a list of parts that i have for this blazer.
tach dash
blazer bucket seats with brackets
van auto tilt column
fresh np205 with 700r4 adapter, and 4x4 output shaft for 700r4 that was cut down for this t-case.
original swing away spare tire mount
gm 14 bolt rear axle
3/4 ton gm 10 bolt front axle
all of the original ac parts
single wall top that needs some fiberglass work
nice complete rear hatch
front and rear driveshafts
complete repaired wire harnesses

the body is in fair shape, is has rust in the floor and the door pillars.
all of the body mounts are solid. it spent most of it's life in the 29 palms area of the so cal desert.

I only want to deal locally, I'm in los angeles. I want $2500 for the whole project or I'll take $1000 for the body by itself. Please don't ask me to part anything out. I will only separate the project if someone takes the body first.

awedel · 10-04-2010, 02:41 PM

Hi,

How much for the rear hatch?

13lazer · 10-04-2010, 06:39 PM

Quote:

Originally Posted by awedel

Hi,

How much for the rear hatch?

i'm not separating anything yet. i want to get rid of the whole project.
stay tuned

**k5blazin** · 10-04-2010, 08:44 PM

IF YOU DECIDE to part this, please put me in line for the tach dash. also looking for the female plug for the dome lights in the single wall top( vehicle side).... thanks

2003 silverado · 10-04-2010, 03:44 PM

Only if you were closer Good deal

2003 silverado · 10-04-2010, 08:53 PM

ttt

**hybridchevy71** · 10-25-2010, 11:20 PM

put me in line for the rear hatch & buckets seats if u deside to part out im located in oc i could pick them up.

ralphie628 · 10-26-2010, 03:13 AM

put me inline for the tach tilt and buckets if you decide to part. i'm local. thanks

themb2g · 04-10-2011, 10:04 AM

please put me in line for the swing asay spare tire mount if you part. Thanks!

meathead95 · 04-10-2011, 06:45 PM

im interested in the body, please send more pics to meathead95@hotmail.com

13lazer · 04-13-2011, 10:12 AM

Project sold 2 weeks ago. Thanks

10-02-2010, 01:12 PM	#1
13lazer 13lazers' blazers Join Date: Jul 2005 Location: San Pedro, CA Posts: 152	72 cst blazer project i am getting rid of my one ton blazer project. this truck is in pieces right now. i want to get rid of the whole project at one time, unless someone only needs the tub. if someone takes the body off my hands i will part out the rest. my main priority is that i don't have room for the body anymore. here's a list of parts that i have for this blazer. tach dash blazer bucket seats with brackets van auto tilt column fresh np205 with 700r4 adapter, and 4x4 output shaft for 700r4 that was cut down for this t-case. original swing away spare tire mount gm 14 bolt rear axle 3/4 ton gm 10 bolt front axle all of the original ac parts single wall top that needs some fiberglass work nice complete rear hatch front and rear driveshafts complete repaired wire harnesses the body is in fair shape, is has rust in the floor and the door pillars. all of the body mounts are solid. it spent most of it's life in the 29 palms area of the so cal desert. I only want to deal locally, I'm in los angeles. I want $2500 for the whole project or I'll take $1000 for the body by itself. Please don't ask me to part anything out. I will only separate the project if someone takes the body first. Attached Images __________________ 1970 2wd blazer 1972 1ton blazer 4x4 in progress 1966 mustang coupe (modified) 1985 c20 suburban tow rig 1996 462 ranger with a 150 efi merc. a former B.A.S.S. tournament boat almost all exempt from california smog laws intentionally.

10-04-2010, 02:41 PM	#2
awedel Registered User Join Date: Feb 2010 Location: santa barbara ca Posts: 78	Re: 72 cst blazer project Hi, How much for the rear hatch?

10-04-2010, 08:44 PM	#4
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 401	Re: 72 cst blazer project IF YOU DECIDE to part this, please put me in line for the tach dash. also looking for the female plug for the dome lights in the single wall top( vehicle side).... thanks

10-04-2010, 03:44 PM	#5
2003 silverado Registered User Join Date: Apr 2010 Location: West Chester Pa Posts: 965	Re: 72 cst blazer project Only if you were closer Good deal __________________ !972 K5 Blazer,Highlander,A/C a twin to the one I Had 1972 K/5 Blazer CST Highlander 15YR project 2003 Silverado Crew 2500HD (Daily driver) 1997 Ford focus (Beater) 2003 ford Taurus (student) 2014 Ford Fusion HYB (wife) 2003 Jetta ( Student)

10-04-2010, 08:53 PM	#6
2003 silverado Registered User Join Date: Apr 2010 Location: West Chester Pa Posts: 965	Re: 72 cst blazer project ttt __________________ !972 K5 Blazer,Highlander,A/C a twin to the one I Had 1972 K/5 Blazer CST Highlander 15YR project 2003 Silverado Crew 2500HD (Daily driver) 1997 Ford focus (Beater) 2003 ford Taurus (student) 2014 Ford Fusion HYB (wife) 2003 Jetta ( Student) Last edited by 2003 silverado; 10-05-2010 at 07:25 AM. Reason: misspoke

10-25-2010, 11:20 PM	#7
hybridchevy71 Registered User Join Date: Mar 2009 Location: Anaheim, CA Posts: 177	Re: 72 cst blazer project put me in line for the rear hatch & buckets seats if u deside to part out im located in oc i could pick them up.

10-26-2010, 03:13 AM	#8
ralphie628 Registered User Join Date: Dec 2009 Location: Chatsworth CA Posts: 243	Re: 72 cst blazer project put me inline for the tach tilt and buckets if you decide to part. i'm local. thanks

04-10-2011, 10:04 AM	#9
themb2g Registered User Join Date: Jul 2010 Location: Portland, Oregon Posts: 411	Re: 72 cst blazer project please put me in line for the swing asay spare tire mount if you part. Thanks!

04-10-2011, 06:45 PM	#10
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 72 cst blazer project im interested in the body, please send more pics to meathead95@hotmail.com __________________ 72 2wd blazer 72 swb 4x4

04-13-2011, 10:12 AM	#11
13lazer 13lazers' blazers Join Date: Jul 2005 Location: San Pedro, CA Posts: 152	Re: 72 cst blazer project Project sold 2 weeks ago. Thanks __________________ 1970 2wd blazer 1972 1ton blazer 4x4 in progress 1966 mustang coupe (modified) 1985 c20 suburban tow rig 1996 462 ranger with a 150 efi merc. a former B.A.S.S. tournament boat almost all exempt from california smog laws intentionally.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.