Autometer Dash Setups - Looking for Pictures - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cped · 08-15-2003, 11:51 AM

Looking for pictures of Autometer gauge setups, preferably in the factory bezels. Trying to get an idea as to what guages look the best in there and which configuration (front loaded or rear loaded) looks the best.

Thanks in advance for the info.

Chad

Chad · 08-15-2003, 01:05 PM

cped,

My Dad has a full Autometer set up in his truck. I don't have pics right now but could get some tonight if you would like. His are top mounted in the stock locations but on a flat peice of billit. The billet is on a stock bezel. In my humble opinion this looks like a race setup. Which is what we wanted. You know like looking at a pro drag car or a NASCAR dash. The ones I have seen recessed or back mounted look good too. They tend to look more "factory". Again just my .02 cents.

Later
Chad

white68chevy · 08-15-2003, 05:48 PM

here are mine

white68chevy · 08-15-2003, 05:51 PM

again

**passthebuck** · 08-15-2003, 06:24 PM

YA! I was searching for this exact same topic yesterday. I too need to see autometer gauge setups in our trucks please!

cableguy0 · 08-15-2003, 06:51 PM

this isnt mine but i believe its junkyardjohns i stole the pic cuz i liked the look i hope he doesnt mind me posting it

slam33 · 08-15-2003, 11:13 PM

Have you guys seen the new carbon fiber setup from classic ind. ? It is sweet, it's in the new cataloge

Locutus · 08-16-2003, 12:47 AM

Here is a pic of mine before I put them in the truck.

Mike

67C10 · 08-16-2003, 12:51 AM

The October issue of Classic Trucks (not out yet) has an article showing this install with the gauges mounted a variety of ways with the stock bezel.

cped · 08-18-2003, 02:13 AM

Great, thanks all, but please keep 'em coming.

67C10:
Thanks for the inside scoop, I will definitely keep my eyes peeled for that issue when it comes out.

Thanks,
Chad

Bowtiefreak · 08-18-2003, 06:53 AM

Quote:

Originally posted by cped
Great, thanks all, but please keep 'em coming.

67C10:
Thanks for the inside scoop, I will definitely keep my eyes peeled for that issue when it comes out.

Thanks,
Chad

Cped-
Look at a post I made about a week ago entitled (Thor50) Mudder67 posted a picture of his dash and Thor50's dash and they both look sweet. Sorry, I don't no how to link it but it is probablly about 7-8 pages back.

Ackattack · 08-18-2003, 09:15 AM

08-15-2003, 11:51 AM	#1
cped Registered User Join Date: Jan 2003 Location: Duvall, WA Posts: 50	Autometer Dash Setups - Looking for Pictures Looking for pictures of Autometer gauge setups, preferably in the factory bezels. Trying to get an idea as to what guages look the best in there and which configuration (front loaded or rear loaded) looks the best. Thanks in advance for the info. Chad __________________ Chad

08-15-2003, 01:05 PM	#2
Chad Registered User Join Date: Oct 2000 Location: Midlothian, Tx Posts: 199	cped, My Dad has a full Autometer set up in his truck. I don't have pics right now but could get some tonight if you would like. His are top mounted in the stock locations but on a flat peice of billit. The billet is on a stock bezel. In my humble opinion this looks like a race setup. Which is what we wanted. You know like looking at a pro drag car or a NASCAR dash. The ones I have seen recessed or back mounted look good too. They tend to look more "factory". Again just my .02 cents. Later Chad __________________ Chad ------------------ 69 Short Fleetside 72 2wd Blazer 70 4x4 Blazer 67 Chevy(big window) Just a cab for now 64 Chevelle SS (2dr Ht)

08-15-2003, 05:48 PM	#3
white68chevy Registered User Join Date: Feb 2001 Location: Hurst,TX,US Posts: 301	here are mine Attached Images __________________ 1968 swb IM-Bufechevy56 If its to loud then your to old

08-15-2003, 05:51 PM	#4
white68chevy Registered User Join Date: Feb 2001 Location: Hurst,TX,US Posts: 301	again Attached Images __________________ 1968 swb IM-Bufechevy56 If its to loud then your to old

08-15-2003, 06:24 PM	#5
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	YA! I was searching for this exact same topic yesterday. I too need to see autometer gauge setups in our trucks please! __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

08-15-2003, 06:51 PM	#6
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	this isnt mine but i believe its junkyardjohns i stole the pic cuz i liked the look i hope he doesnt mind me posting it __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member. Last edited by cableguy0; 05-12-2006 at 02:37 AM.

08-15-2003, 11:13 PM	#7
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Have you guys seen the new carbon fiber setup from classic ind. ? It is sweet, it's in the new cataloge __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

08-16-2003, 12:47 AM	#8
Locutus Registered User Join Date: Jan 2003 Location: Santa Fe, Texas Posts: 250	Here is a pic of mine before I put them in the truck. Mike Attached Images

08-16-2003, 12:51 AM	#9
67C10 Registered User Join Date: Dec 1999 Location: California Posts: 16	The October issue of Classic Trucks (not out yet) has an article showing this install with the gauges mounted a variety of ways with the stock bezel.

08-18-2003, 02:13 AM	#10
cped Registered User Join Date: Jan 2003 Location: Duvall, WA Posts: 50	Great, thanks all, but please keep 'em coming. 67C10: Thanks for the inside scoop, I will definitely keep my eyes peeled for that issue when it comes out. Thanks, Chad __________________ Chad

08-18-2003, 09:15 AM	#12
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	__________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.